ページ1に含まれる内容の要旨
USER’S MANUAL
EVO3 MOTORIZED TREADMILL
MODEL NUMBER: EVO3
USER WEIGHT LIMITATION: 400lbs.
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
ページ2に含まれる内容の要旨
2 EVO3 MOTORIZED TREADMILL PRECAUTIONS For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness treadmill. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Precautions: WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and informatio
ページ3に含まれる内容の要旨
3 EVO3 MOTORIZED TREADMILL POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This treadmill can be seriously damaged by sudden volta
ページ4に含まれる内容の要旨
4 EVO3 MOTORIZED TREADMILL PREASSEMBLY Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer. Gather your tools: Before starting the assembly of your unit, make su
ページ5に含まれる内容の要旨
5 EVO3 MOTORIZED TREADMILL HARDWARE COMPARISON CHART Hardware chart: For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help you identify those items that may be unfamiliar to you. NO. DESCRIPTION QTY. 8 M6 X 15mm Console Screw 2 16 M8 x 19mm Screw 14 17 M8 x 25mm Screw 16 23 M8 x 10mm Allen Head Bolt 4 25 M8 x 76mm Allen Head Bolt 2 26 Metal Cap 2 30 Plastic Cover 2 31 M6 x 20mm Screw 2 49 M8 x 25mm
ページ6に含まれる内容の要旨
6 EVO3 MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 1 Computer 1 EVO3-01 30 Plastic Cover 2 EVO3-30 2 Caster Bracket - Left 1 EVO3-02 31 M6 x 20mm Screw 2 EVO3-31 3 M10 Nylon Nut 4 EVO3-03 32 M8 x 19mm Allen Head Bolt 4 EVO3-32 4 Safety Key 1 EVO3-04 33 M5 x 10 Allen Head Bolt 2 EVO3-33 5 Console Support Tube 1 EVO3-05 34 Power Switch 1 EVO3-34 6 Wire Protect Key 1 EVO3-06 35 Side Cover - Left 1 EVO3-35 7 M8 Nylon Nut 3 EVO3
ページ7に含まれる内容の要旨
7 EVO3 MOTORIZED TREADMILL PARTS LIST No. Description Qty. Order No. No. Description Qty. Order No. 59 Motor Hood 1 EVO3-59 89 Bushing 4 EVO3-89 60 #8 x 50mm Screw 2 EVO3-60 90 M10 x 60mm Bolt 2 EVO3-90 61 Side Rail (R & L) 2 EVO3-61 91 Deck Frame 1 EVO3-91 Motor Hood Side Cover - 62 Deck End Cap - Left 1 EVO3-62 92 1 EVO3-92 Right Motor Hood Side Cover - 63 Running Belt 1 EVO3-63 93 1 EVO3-93 Left 64 Deck End Cap - Right 1 EVO3-64 94 Frame Side Cover - Right 1 EVO3-94
ページ8に含まれる内容の要旨
8 EVO3 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
ページ9に含まれる内容の要旨
9 EVO3 MOTORIZED TREADMILL PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Visit us at: www.evofitness.com
ページ10に含まれる内容の要旨
10 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 1: Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1. First make sure to connect the wires. Then insert the Left and Right Uprights (28 and 29) into the Base Frame (48) and secure with M6 x 55mm Bolts (50), 6 x 13mm Washers (56) and M8 x 19mm Allen Head Bolts (32). Visit us at: www.evofitness.com
ページ11に含まれる内容の要旨
11 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 2: Rotate the Console Support Tube (5) up to the correct position as shown and secure in place using M5 x 10mm Screw (9). Visit us at: www.evofitness.com
ページ12に含まれる内容の要旨
12 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 3: Rotate the Computer (1) up to the correct position as shown and secure in place using M6 x 15mm Console Screws (8). Visit us at: www.evofitness.com
ページ13に含まれる内容の要旨
13 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 4: NOTE: If you have the Optional Smooth Music Package follow these instructions before attaching the Console Tray (39). Run the Cd Player Wires from the back of the Computer (1) first through the small hole on the Console Tray (39), then through the tabs on the back of the Console Tray (39) and finally through the small hole on the side of the Computer (1) as shown in FIG-2. Insert the Console Tray (39) into the back of the Com
ページ14に含まれる内容の要旨
14 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 5: Attach the Cross Brace (27) to the Left Upright (28) and Right Upright (29) using Metal Caps (26) and M8 x 76mm Allen Head Bolts (25). Visit us at: www.evofitness.com
ページ15に含まれる内容の要旨
15 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 6: Unscrew M8 x 25mm Screw (49). Insert the Console Support Tube (40) into the Cross Brace (27) and secure with M8 x 25mm Allen Head Bolt (49). Do not fully tighten until later. Visit us at: www.evofitness.com
ページ16に含まれる内容の要旨
16 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 7: Rotate the Console Support Tube (40) and slide it into the hole underneath the Console Tray (39). Visit us at: www.evofitness.com
ページ17に含まれる内容の要旨
17 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 8: Attach the Upright Plastic Shrouds Left #1 and Left #2 (41 and 42) to the Left Upright (28) and secure using M8 x 19mm Screws (16) and M8 x 25mm Screws (17). Repeat this procedure with Upright Plastic Shrouds Right #1 and Right #2 (43 and 44) on the Right Upright (29) and secure with M8 x 19mm Screws (16) and M8 x 25mm Screws (17). Visit us at: www.evofitness.com
ページ18に含まれる内容の要旨
18 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 9: Fully tighten M8 x 15mm Bolt (21), M8 x 76mm Allen Head Bolt (25) and M8 x 25mm Screw (17). Visit us at: www.evofitness.com
ページ19に含まれる内容の要旨
19 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 10: Connect the Motion Control Sensor and Hand Pulse Sensor Wires. Then, attach the Left and Right Handlebars (14 and 15) to the Left and Right Uprights (28 and 29) and secure using M8 x 10mm Allen Head Bolts (23). Visit us at: www.evofitness.com
ページ20に含まれる内容の要旨
20 EVO3 MOTORIZED TREADMILL ASSEMBLY STEP 11: Insert the Handlebar Rear End Cap – Left #1 (10) and Handlebar Rear End Cap – Left #2 (11) over the Left Upright (28) and secure in place using M8 x 25mm Screws (17) and M8 x 19mm Screws (16). Insert the Handlebar Rear End Cap – Right #2 (13) and Handlebar Rear End Cap – Right #1 (12) over the Right Upright (29) and secure in place using M8 x 25mm Screws (17) and M8 x 19mm Screws (16). Visit us at: www.evofitness.com
