ページ1に含まれる内容の要旨
www.nordictrack.com
Model No. 831.24922.0
Serial No. USER’S MANUAL
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-800-TO-BE-FIT
(1-800-862-3348
ページ2に含まれる内容の要旨
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 PART IDENTIFICA
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. 1. It is the responsibility of the owner to ensure 12. Plug the power cord into a surge suppressor that all users of this treadmill are adequ
ページ4に含まれる内容の要旨
20. The heart rate monitor is not a medical 24. Do not change the incline of the treadmill by device. Various factors, including the user’s placing objects under the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 25. Never insert any object into any opening on intended only as an exercise aid in determin- the treadmill. ing heart rate trends in general. 26. Inspect and properly tighten all parts of the 21. Never leave the treadmill unattended
ページ5に含まれる内容の要旨
BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this ® NORDICTRACK C 1550 treadmill. The C 1550 tread- manual. To help us assist you, please note the product mill offers an impressive selection of features designed model number and serial number before contacting us. to make your workouts at home more enjoyable and The model number and the location of the serial num- effective. And when you’re not exercising, the unique ber decal
ページ6に含まれる内容の要旨
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preat- tached. Extra parts may be included. #8 x 1/2" #8 x 3/4" Screw 5/16" Star Screw (101)–2 (1)–2 3/8" Nut (6)–2 Washer (5)–4 5/16" x 1
ページ7に含まれる内容の要旨
ASSEMBLY • To watch an assembly or on the shipping carton. This is normal. If there video, go to is lubricant on top of the walking belt, wipe it off http://productvideo.co/ with a soft cloth and a mild, non-abrasive cleaner. assembly/sears/ nordictrack or use your • Left parts are marked “L” or “Left” and right parts mobile phone or smart- are marked “R” or “Right.” phone to read the QR code at the right. • To identify small parts, see page 6. • Assembly requires two persons.
ページ8に含まれる内容の要旨
3. Remove the tie securing the Upright Wire (78) to 3 the left Upright (73). A With the help of a second person, hold the con- sole assembly (A) near the Upright (73). 2 Attach the console assembly (A) with four 5/16" x 1" Screws (2) and four 5/16" Star Washers (5). 5 See the inset drawing. Be careful not to pinch the wires (B, 78). Start all four Screws, and then tighten them. 2 5 B 78 73 78 B 4. Connect the Upright Wire (78) to the console 4 wire (B). See the inset drawing. The conne
ページ9に含まれる内容の要旨
5. Identify the left handrail assembly (C). 5 Attach the left handrail assembly (C) with two A 5/16" x 1 1/2" Screws (3). Start both Screws, and then tighten them. Be careful not to pinch the wires. C Attach the right handrail assembly in the same way. 3 3 6. Tighten a #8 x 1/2" Screw (101) and a #8 x 3/4" 6 Screw (1) into the console assembly (A) and the left handrail assembly (C) in the locations shown. 1 A Do not overtighten the Screws. Tighten a #8 x 1/2" Screw (not shown) and a
ページ10に含まれる内容の要旨
7. Raise the Frame (52) to the position shown. 7 Have a second person hold the Frame until step 8 is completed. Orient the Storage Latch (49) so that the large barrel and the latch knob are in the positions 52 shown. Attach the lower end of the Storage Latch (49) to the Upright (73) with a 3/8" x 2" Bolt (24) and a 3/8" Nut (6). 73 6 24 49 Latch Knob Large Barrel 8. Attach the upper end of the Storage Latch (49) 8 to the Frame (52) with a 3/8" x 1 3/4" Bolt (4) and a 3/8" Nut
ページ11に含まれる内容の要旨
9. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 24 and 25). 10. IMPORTANT: See page 13 and plug in the 10 power cord. Next, see page 15 and turn on IMPORTANT: the power
ページ12に含まれる内容の要旨
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR • Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it The heart rate to temperatures above 122° F (50° C) or below 14° monitor consists of F (-10° C). a chest strap and a Chest • Do not excessively bend or stretch the sensor when sensor. Insert the Strap using or storing the heart rate monitor. Tabs tab on one end of the chest strap into • To clean the sensor,
ページ13に含まれる内容の要旨
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’s circuit. IMPORTANT: The treadmill is not compat- power. Voltage
ページ14に含まれる内容の要旨
CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s stereo sound system The treadmill console offers an impressive array of while you exercise. features designed to make your workouts more effec- tive and enjoyable. When you use the manual mode, To turn on the power, see page 15. To use the man- you can change the speed and incline of the treadmill ual mode, see page 15. To use an onboard workout, with the touch of a b
ページ15に含まれる内容の要旨
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left. do this, you may damage the console displays or other electrical components. 2. Select the manual mode. Plug in the power cord (see Press the Manual Control button on the console. If page 13). Next, locate the y
ページ16に含まれる内容の要旨
4. Change the incline of the treadmill as desired. The My Trail tab will show a track that represents 1/4 mile (400 m). As you exercise, the ashing rect- To change the incline of the treadmill, press the angle will show your progress. The My Trail tab will Incline increase or decrease button or one of the also show the number of laps you complete. numbered 1 Step Incline/Decline buttons. Each time you press one of the buttons, the treadmill will The Calorie tab will show the approxi
ページ17に含まれる内容の要旨
If desired, adjust the 7. Turn on the fan if desired. Increase volume by pressing the volume increase and The fan features multiple speed settings and an decrease buttons on auto mode. When the auto mode is selected, the console. the speed of the fan will automatically increase and decrease as the speed of the walking belt Decrease increases and decreases. To reset the displays, press the Stop button, Press the small fan but- remove the key, and then reinsert the key. ton repeatedly
ページ18に含まれる内容の要旨
HOW TO USE AN ONBOARD WORKOUT programmed for the next segment, the speed and/ or incline setting will ash in the display and the 1. Insert the key into the console. treadmill will automatically adjust to the new speed and/or incline setting. See HOW TO TURN ON THE POWER on page 15. The workout will continue in this way until the last 2. Select an onboard workout. segment of the pro le ashes in the display and the last segment ends. The walking belt will then slow To select an
ページ19に含まれる内容の要旨
HOW TO USE A SET-A-GOAL WORKOUT HOW TO USE AN IFIT WORKOUT 1. Insert the key into the console. Note: To use an iFit workout, you must have an optional iFit module. To purchase an iFit module at See HOW TO TURN ON THE POWER on page 15. any time, go to www.iFit.com or call the telephone number on the front cover of this manual. You must 2. Set a calories, distance, or time goal. also have access to a computer with a USB port and an internet connection. In addition, you must have Press t
ページ20に含まれる内容の要旨
For more information about the iFit workouts, 7. Measure your heart rate if desired. please see www.iFit.com. See step 6 on page 17. When you select an iFit workout, the display will show the name, duration, maximum speed setting, 8. Turn on the fan if desired. and distance of the workout. The display will also show the approximate number of calories you will See step 7 on page 17. burn during the workout and a profile of the speed settings of the workout. 9. When you are nished ex
