York DFAAの取扱説明書

デバイスYork DFAAの取扱説明書

デバイス: York DFAA
カテゴリ: バーナー
メーカー: York
サイズ: 1.23 MB
追加した日付: 6/9/2013
ページ数: 40
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスYork DFAAの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、York DFAAに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書York DFAAをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書York DFAAのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - York DFAAの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
York DFAA 取扱説明書 - Online PDF
Advertisement
« Page 1 of 40 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書York DFAAを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書York DFAAの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

INSTALLATION MANUAL
HIGH EFFICIENCY SEALED COMBUSTION
EFFICIENCY
RATING
CERTIFIED
DRUM HEAT EXCHANGER SERIES
MODEL: DFAA/DFAH
ISO 9001
Certified Quality
(Oil and Gas Conversion Burner/ Management System
For Installation In:
Single Stage Downflow Only)
1. Manufactured (Mobile) Homes
66 - 84 MBH INPUT
2. Recreational Vehicles & Park Models
(19.34 - 24.62 KW) INPUT
3. Modular Homes & Buildings
LIST OF SECTIONS
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ページ2に含まれる内容の要旨

107272-UIM-B-1105 c. The temperature of the return air to the furnace must not be SPECIFIC SAFETY RULES AND PRECAUTIONS less than 55° F (13° C), with no evening setback or furnace 1. U.S.....No. 1 or No. 2 heating oil only (ASTM D396), shutdown, to prevent condensation in the primary heat CANADA.....No. 1 stove oil or No. 2 furnace oil only are approved exchangers. for use and can be burned in this furnace. Refer to the furnace rat- d. The air temperature rise must be within the stated rise ran

ページ3に含まれる内容の要旨

107272-UIM-B-1105 • Provide clearances from combustible materials as listed under • Permanent wave solutions Furnace Locations and Clearances. • Chlorinated waxes and cleaners • Provide clearances for servicing, ensuring that service access is • Chlorine based swimming pool chemicals allowed for both the burners and blower. • Water softening chemicals • These models are ETL listed and approved for installation into a • De-icing salts or chemicals Modular Home or a Manufactured (Mobile) Home

ページ4に含まれる内容の要旨

Y Y T T E E F F A A 107272-UIM-B-1105 General Model Model "AFEVC" MFR'S SETTINGS Information ATC: AF36YHHS Series Oil Burner FIRING RNG: 0.5-1.10 GPH R. W. Beckett HEAD: F3 SERIAL NUMBER STC PLT: 3-3/8U Manufacturer’s Settings Serial Number, NOZZLE: 0.65 X 70A DLVN HLW 020923-49038 PUMP PRS: 100 PSI Including Date Code RWB R. W. Beckett Specification EVC201 R00 Number and Revision ELYRIA OHIO U.S.A. Rating Information Firing Rng: 0.50-0.75 GPH 020923-49038 120V/60Hz 5.8A LISTED Approval Agency R

ページ5に含まれる内容の要旨

107272-UIM-B-1105 C Inches c.m. E D A 59-1/2” 151.0 F B 76” 193.0 C E C 24.3/4” 62.9 G D D 23” 58.4 F E 19-1/2” 49.5 F 9-3/4” 24.8 G G 12” 30.5 B A DFAH Series DFAA Series FIGURE 2: Dimensions When the furnace is used in conjunction with a cooling coil, the coil SECTION II: DUCTWORK must be installed parallel with, or in the supply air side of the furnace to DUCTWORK GENERAL INFORMATION avoid condensation in the primary heat exchanger. When a parallel flow The duct system’s design and installa

ページ6に含まれる内容の要旨

107272-UIM-B-1105 Use the example below to help you in calculating the duct area to deter- 2. The square inch area for 7 inch (17.8 cm) round pipe is 38.4, mul- 2 2 mine whether the ducts have sufficient area so that the furnace oper- tiply by 2 for two round ducts which equals 76.8 inch (495 cm ). 2 2 ates at the specified external static pressure and within the air 3. Then take the 224 inch (1445 cm ) from the rectangular duct and 2 2 temperature rise specified on the nameplate. add it to the

ページ7に含まれる内容の要旨

107272-UIM-B-1105 A Single trunk duct C Transition Duct with Branches B* Transition duct Dual trunk duct with crossover connector 1 4 Dual trunk duct Branches 2 Crossover 3 1. Crossover Duct must be centered directly under furnace. 2. Use 12” (30.5 cm) Diameter Round or insulated Flex-duct only. 3. Terminate Flex-duct (opposite furnace) in the center of the trunk duct. 4. Flex-duct material must be pulled tight — No Loops or unnecessary dips — Air Flow may be impeded. FIGURE 3: Air Distributio

ページ8に含まれる内容の要旨

107272-UIM-B-1105 DUCT CONNECTORS 2-3/8 18-3/4 (47.6 cm) 2-3/8 18-3/4 (47.6 cm) (6.0 cm) (6.0 cm) SEE SEE 2-3/8 14 (35.6 cm) 2-3/8 14 (35.6 cm) CHART CHART (6.0 cm) (6.0 cm) 13 13 12 12 (33.0 cm) (33.0 cm) (30.5 cm) (30.5 cm) 11 18-3/4 11 18-3/4 (27.9 cm (27.9 cm (47.6 cm) (47.6 cm) 4-3/8 4-3/8 (11.1 cm) (11.1 cm) DUCT CONNECTOR DIMENSIONS DUCT CONNECTOR DIMENSIONS DUCT CONNECTOR DUCT CONNECTOR DUCT CONNECTOR DUCT CONNECTOR PART NUMBER DEPTH PART NUMBER DEPTH 7990-6011 1” (2.5 cm) 1” (2.5 cm) 79

ページ9に含まれる内容の要旨

107272-UIM-B-1105 For installations with a parallel flow arrangement, the furnace must be Locator Bracket equipped with a damper to prevent cold air from being discharged up Nails, Flat Head Screws around the heat exchanger. Cold air causes condensation inside the or Staples Bend Tabs Under Duct exchanger and can cause it to rust out which can allow products of Opening to Secure to the combustion to be circulated into the living area by the furnace blower Supply Duct resulting in possible asphyx

ページ10に含まれる内容の要旨

107272-UIM-B-1105 DFAH Furnaces: If a matching cooling coil is used, it may be placed directly on the fur- nace outlet and sealed to prevent leakage. Follow the coil instructions for installing the supply plenum. On all installations without a coil, a removable access panel is recommended in the outlet duct such that smoke or reflected light would be observable inside the casing to indi- cate the presence of leaks in the heat exchanger. This access cover Blend Air Flex Duct shall be attached in

ページ11に含まれる内容の要旨

107272-UIM-B-1105 IMPORTANT: Air velocity through throwaway type filters must not TABLE 6: Burner Specifications exceed 300 feet per minute (1.52 m/m). . Furnace Model Burner Spec ATC Head DFAA084BBTA EVC - 201 AF36YHHS F3 DFAH084BBSA DFAA066BBTA EVC - 202 AF36YHHS F3 All installations must have a filter installed. DFAH066BBSA Static Plate Nozzle Pump Pressure Air Boot Setting 3-3/8 U 0.65 x 70° A 100 psi 4.0 Delavan (689.5 kPa) Air Filters Can Be Found On The Inside 3-3/8 U 0.50 x 70° A 100 ps

ページ12に含まれる内容の要旨

107272-UIM-B-1105 NOTICE SPECIAL REQUIREMENTS TABLE 7: Burner Rating at Elevation Above Sea Level, gph (l/m) Nozzle Size Elevation (Above Sea Level) 0.50 1.892706 0.65 2.460518 This equipment must be installed, adjusted, and started only by a ft m gph l/h gph l/h qualified service technician, an individual or agency, licensed and 500 152 0.50 1.89 0.65 2.46 experienced with all codes and ordinances, who is responsible for 1,000 305 0.50 1.89 0.65 2.46 the installation and adjustment of the equip

ページ13に含まれる内容の要旨

107272-UIM-B-1105 Follow information provided with the burner, the fuel pump, or the calcu- The return line must terminate 3” to 4” above supply line in the oil tank. lation below to determine pipe size and length. Failure to do this may introduce air into the system and could result in the loss of the prime. Refer to Figure 18. L = Line Length in feet H = Head in feet Outside Tank Fuel Unit L=H+R Above Bottom of Tank Q = Firing rate in GPH Primary 3/8” (0.95 cm) line L = (6 - 0.75 x H) / 0.0

ページ14に含まれる内容の要旨

107272-UIM-B-1105 NOTE: A burner with an electronic igniter or a PSC motor will have a lower operating current. The actual load should be determined by a cur- Room Furnace Thermostat Control rent meter. R R NOTE: See appliance manufacturer’s burner specifications for required W W outlet pressure. Pressure is 100 psig (689 kPa) unless otherwise noted. SUPPLY VOLTAGE CONNECTIONS FIGURE 21: Wiring for Heat Only Thermostat 1. Provide a power supply separate from all other circuits. Install overcur

ページ15に含まれる内容の要旨

107272-UIM-B-1105 2. After unpacking the roof jack, check the rain caps. Insure they are EXTERIOR ROOF JACK EXTENSION not damaged, tilted or crooked. Do not twist, crush or sit on the Application roof caps during installation. Damaged roof caps will cause Available to comply with instances in which the roof jack crown needs to improper furnace operation. The furnace will not heat properly and be raised to meet a roof clearance requirement. One extension will could result in explosion. raise the

ページ16に含まれる内容の要旨

107272-UIM-B-1105 Connect Roof Jack to Furnace 12” Min. 1. Install Flue Shield inside Vent Connector. Push Flue Shield down until in contact with the built-in stop inside the Vent Connector. See Figures 28 and 29. 9” Min. 6” Min. or 6” Above the Snow Line Failure to install the Flue Shield may cause premature flue pipe deterioration. Damaged flue pipe can result in asphyxiation, fire or equipment malfunction. 2” Pipe Rubber Coupling with Hose Clamp 6” Min. Flue Shield Furnace Vent Connector FIG

ページ17に含まれる内容の要旨

107272-UIM-B-1105 If using an optional interior extension, place extension down on furnace top and mate with furnace flue and combustion air collar until it lines up with screw holes in combustion air collar. Secure the extension to the furnace using the pre-punched holes. Use 1/2” (1.27 cm) blunt or sharp Do not exceed the maximum adjustable height as listed in Table 9. These maximum heights allow an additional 1 1/2” (3.81 cm) travel end sheet metal screws to fasten roof jack combustion air pi

ページ18に含まれる内容の要旨

107272-UIM-B-1105 DFAH FURNACES DFAA FURNACES SWIVEL FLASHING SLANT INSTALLATION DIMENSIONS INSTALLATION DIMENSIONS ADJUSTS FROM FLASHING 0/12 TO 5/12 PITCH 3/12 PITCH “A” “B” ADJUSTABLE HEIGHT ADJUSTABLE HEIGHT 4000-7101/C 4000-6101/A 70” to 79” 86” to 95” 4000-7121/C 4000-6121/A 75” to 86” 91” to 102” 4000-7141/C 4000-6141/A 83” to 104” 99” to 120” 4000-7151/C 4000-6151/A 90” to 116” 106” to 132” 4000-7171/C 4000-6171/A 127” to 157” 143” to 173”” 1 The 4084-7141 is dimensionally the same as 40

ページ19に含まれる内容の要旨

107272-UIM-B-1105 DFAH FURNACES DFAA FURNACES SWIVEL FLASHING SLANT INSTALLATION DIMENSIONS INSTALLATION DIMENSIONS ADJUSTS FROM FLASHING 0/12 TO 5/12 PITCH 3/12 PITCH “B” “A” ADJUSTABLE HEIGHT ADJUSTABLE HEIGHT 4000-8161/C 4000-9161/A 85” to 101” 101” to 117” 4000-8181/C 4000-9181/A 99” to 129” 115” to 145” Carefully Caulk All Around Swivel Joint with Sealant Supplied by Furnace Manufacturer. Caulk Caulk Under Under Flashing Flashing The End of Upper Portion of Roof Jack need Not extend below t

ページ20に含まれる内容の要旨

107272-UIM-B-1105 VENT SYSTEM Upper Cap This furnace is a sealed combustion (direct vent) unit and is design cer- Lower tified to use only a 4000 Series roof jack. These roof jacks are designed STEP 1: Cap to exhaust flue products to the outside. Remove upper and lower cap. Remove the two (2) screws INSTALLING CEILING RING that secure the upper cap to the crown assembly base and The ceiling ring is to meet fire stop requirements. Accessory Ceiling remove the upper cap. Next, Ring may be installe


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 York DFAH 取扱説明書 バーナー 2
2 Adams Speedflame Power Gas 取扱説明書 バーナー 3
3 Adams Mark 10 取扱説明書 バーナー 1
4 AEG 3531 WK-M GB 949600835 取扱説明書 バーナー 4
5 APW GHP-2H 取扱説明書 バーナー 3
6 APW GHPW-2H 取扱説明書 バーナー 2
7 APW GHP-4H 取扱説明書 バーナー 1
8 Bacharach MZF 取扱説明書 バーナー 2
9 Beckett 800 取扱説明書 バーナー 10
10 Beckett AFII 100 取扱説明書 バーナー 11
11 Beckett CF375 取扱説明書 バーナー 8
12 Beckett AFG 240V 取扱説明書 バーナー 12
13 Beckett AFG 取扱説明書 バーナー 28
14 Beckett 150 取扱説明書 バーナー 0
15 APW GHP-6H 取扱説明書 バーナー 2