ページ1に含まれる内容の要旨
Trouble-shooting
TWIN-TUB WASHING MACHINE
If the laundries fall to the outer side of the spin tub
AWT-120LI
If the laundries fall to the outer side of the spin tub,
Please contact the after-sales service department.
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance
department or a
ページ2に含まれる内容の要旨
Packing list Cleaning the overflow filter Quantity Name 2. Take off the corrugation pipe. Water level Dismantle the upper part of the One piece adjusting lever User's manual corrugation pipe inside the Corrugation overflow filter ( as indicated in pipe Figure 1). One piece Water inlet hose 3. Cleaning the overflow filter Clean the lint around the filter Gland and flush with tap water. One piece Figure 1 4. Install the overflow filter. One set Semi Auto was
ページ3に含まれる内容の要旨
Maintenance Names of the parts Drain selector After using, please clean the lint and eyewinker of the lint filter and Wash selector overflow filter in time. Otherwise it may influence your using the machine. Wash timer Outer cover of the spin tub Please first pull off the power plug from the receptacle before cleaning. Water-filling entrance Inner cover of the spin tub Control panel Cleaning the lint filter Spin timer Filter frame Major frame Water level adjusting lever The lint filter mus
ページ4に含まれる内容の要旨
Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage.Be sure to use single-phase at the location easily to be insert- Spinning three pins receptacle.The earthing ed and extracted by hand. Be sure terminal of the receptacle must be to pull the plug off when there's earthed reliably.If possible,please power failure, or the machine is adopt electric leakage protector. being moved, cleaned or
ページ5に含まれる内容の要旨
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the Rinsing machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Rinse with water-filling 1.Put the laundries Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the Do not put
ページ6に含まれる内容の要旨
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating Midway spinning the machine. Install the lint filter 1.Put the laundries into the spin tub evenly and smoothly. Put the underside of the lint filter into overflow filter 2.Spin overflow filter then push the upside into overflow filter. (1) Put the gland in properly. After installation, please refer that the lint filter
ページ7に含まれる内容の要旨
OF OFF F OFF OFF OF OFF F OF OFF F OFF OFF How to change the direction of the drain hoses Washing sequence Wash selector Spin timer Wash timer Drain selector (To set to below 2 minute, (To set to below 1 minute, (Standard current, (Do not set drain selector Water inlet first set to 2 minute then first set to 5 minute then on Drain position during strong current) Figure 1 indicates the ex factory installation turn it back. it can increase turn it back. it can increase Back wash
ページ8に含まれる内容の要旨
Preparation before washing Do s and Don ts Preparation before washing 1.Connect the water inlet hose. The capacity of washing and spinning of the 2.Confirm that the washing machine is earthed machine refer to the weight of the standard reliably . Then insert the power plug into the laundries under dry condition that can be receptacle. Do not connect the earth terminal washed or spinned in one time. to the gas pipe and tap water pipe. The thickness ,size , type of the clo
