ページ1に含まれる内容の要旨
Front Load Washer HMS1000TVE
MODEL HMS1000TVE
FRONT LOADING WASHING MACHINE
Service Manual
Features
300mm diameter porthole, door may be
open at a 180 degrees.
Multi-gear speed controller
Unique gasket design featuring no residual
water hidden inside
Selecting washing temperature according to
the type of fabrics
Delay time adjustive
Washing Programs-11
Haier Group
MANUAL CODE No.1
ページ2に含まれる内容の要旨
Front Load Washer HMS1000TVE 1 Contents----------------------------------------------------------------------------------------1 2 Product code illumination and series introduction-----------------------------------2 3 Features ---------------------------------------------------------------------------------------3 4 Specification ----------------------------------------------------------------------------------4 5 Safety caution --------------------------------------------------
ページ3に含まれる内容の要旨
Front Load Washer HMS1000TVE Model code rule description Model identification HM S 1000 T V E A B C D E A Serial code B Max spin speed C Temprature adjustive D Spin speed adjustive E Computer control Examples HMS1000TVE It represents HK series appearance with big window 180 opening window 800rpm spin speed.Spin speed is adjustive from 0 to 1000rpm temprature is also adjustive. it’s controlled . by computer. 2
ページ4に含まれる内容の要旨
Front Load Washer HMS1000TVE 300mm diameter porthole, door may be open at a 180 degrees. Facilitate view of wash process, facilitate unloading and easy to use with large port. Multi-gear speed controller According to different costuming you can slect corresponding spin speed from 0 to 1000 rpm. Unique gasket design featuring no residual water hidden inside. By the unique gasket washing machine can left no residual water hidden between outer drum and board. Delay time adjust
ページ5に含まれる内容の要旨
Front Load Washer HMS1000TVE New Sensor Proposal 2004 Front loaders washing machines HMS1000TVE Brand position center upper frame of door / chromed sticker Model number serigraphy right top corner control panel On white: silver / On silver : black or dark grey 1. Product identification Description of appliance Washing machine Type of appliance (FS = standing, BI = built-in) FS Supplier own brand Haier Supplier bar code EAN TBC Mares computer code
ページ6に含まれる内容の要旨
Front Load Washer HMS1000TVE Delay timer (from - to) h 0.5-24 Self cleaning suds pump Water inlet hose cold water / hot water Water drain hose / -support / Adjustable feet n° 4 4. Safety systems Auto door lock ADL Motor overheating protection MOP No heating without water NHW Auto water cool-down (before drain 90°C boiled water) AWC Water return protection WRP Acqua Stop kit - Child protection 5. Programs 1) Strong acti
ページ7に含まれる内容の要旨
Front Load Washer HMS1000TVE Matters Needing Attention .A separate earthed socket is required for the 2. Hold the plug and not the electric cable power supply. The washing machine must be when unplugging the washing machine. positioned so that the plug is accessible. 4. Do not touch or use the washing machine bare- 3.Fuses in the power circuit should be rated for 15A. footed or when the hands or feet are wet. If the supply cord is damaged, it must be replaced by t
ページ8に含まれる内容の要旨
Front Load Washer HMS1000TVE Matters Needing Attention 9.The carpet must not obstruct the ventilation .The washing machine should not be install- ed outdoors or in a damp place. In the openings in the base of the washing machine. event of water leakage or splashes allow the machine to dry naturally. 11.During installation, ensure that the electric 10.Keep away from heat sources and direct sun- cable is not trapped by the washing machine light to prevent plastic
ページ9に含まれる内容の要旨
Front Load Washer HMS1000TVE Matters Needing Attention 3. Do not place heavy, heating source or wet 4. Do not hot wash foam rubber or sponge-like materials. articles on the top of the washing machine. 5. Before washing, do up zippers, buttons and 6. Do not open the detergent distribution drawer during the wash cycle.. clothes straps and put small articles, such as socks, laces or bras, into a washing bag or a pillow. Steel wires in bras will po
ページ10に含まれる内容の要旨
Front Load Washer HMS1000TVE Installation Fig. 1 Check attachments and materials with reference to the following D ismantle the packing bolts as shown in Fig. 2. The packing bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process. Beforeuse: 1. Remove the back plate; 2. Remove the three packing bolts on the back plate and take out the rubber hose; 3. Replace the back plate; 4. Fill the holes le
ページ11に含まれる内容の要旨
Front Load Washer HMS700TVE Installation Joining the Inlet Hose to the Washing Machine 1. Connect the nut on the inlet hose to the connector on the water valve. Connect of water inlet valve The height of the drainage outlet must be 80-100cm. To prevent the drainage hose from dropping off, fix it to the drainage hose clip at the back of the washing machine. Use the drainage holder to keep the end of the drainage hose retained and to prevent the outflow of water. It
ページ12に含まれる内容の要旨
Front Load Washer HMS700TVE 485 595 height: 860mm / width: 595mm / depth: 485mm 11 860
ページ13に含まれる内容の要旨
Front Load Washer HMS1000TVE Detergent dispenser Top Progtam selector Button Door handle Porthole Bottom plaque Power supply cable Drain hose clip Earth terminal Back plate screw(3) Drain hose Back plate 12
ページ14に含まれる内容の要旨
Front Load Washer HMS1000TVE Control Panel HMS1000TVE Pre-wash Cotton Synthetic Wool Cashmere Silk Quick Wash Rinse Spin Drain Delay Power Temperature Spin Start/Pause P ower Switch Press this button to switch on the washing machine. Press it again to switch it off. S tart / Pause Button When the washing machine is connected to the power socket and a program is selected, washing operation will start. Lightly touch this button during a wash cycle, operation will stop and
ページ15に含まれる内容の要旨
Front Load Washer HMS1000TVE F: Delay Button Touch this button lightly, the washing machine will start operation after a period of time and the corresponding indicator will go on. The range is 0.5-24 hours; each touch of this button increases a half hour. After the button is set, press the Start/Pause button to start countdown of the set time (the time is displayed on the screen until the program ends). E+F Key Combination Press these two keys simultaneously, the sign "LOCK" and the
ページ16に含まれる内容の要旨
Front Load Washer HMS1000TVE Guide to Operational Program Selection Detergent Compartment Default Setting Ironing-free Recommended Delay Program Temperature (Working in Laundry Washing Cycle) Temperature Speed Total Time Cold Pre-wash Heavy-soil laundry Yes Yes Cold Yes Cotton Yes Cotton fabrics Cold Fast-color synth- Synthetic Yes Yes etic Wool Woolen fabrics No Cold Yes Cashmere fabrics Cold No Cashmere Yes Silk C Co olld d Silk fabrics Yes Yes Medium-soil No Cold Y
ページ17に含まれる内容の要旨
Front Load Washer HMS1000TVE 1. Control panel lock function: To prevent children from accidentally starting the machine, the control panel can be locked by pressing the "Temp" and "Delay" buttons at the same time. After the panel is locked, the sign "LOCK" and the wash time are displayed alternately and all the keys are inactivated. Press the two buttons again to cancel. 2. Power-off memory function: This machine has a power-off memory function. In case of abrupt power failure or
ページ18に含まれる内容の要旨
Front Load Washer HMS1000TVE I .The appliance does not work. Possible causes 1.The socket is not the required one or the connection is loose. 2.The door is not properly closed or the switch of micro delay is in poor contact. 3.The plug wire of motor is in poor contact or the motor is broken. 4.Malfunction of PCB Troubleshooting 1.Check the socket and plug to make sure that they are properly connected. 2.Check whether the micro delay switch is in good contact in on-position. If
ページ19に含まれる内容の要旨
Front Load Washer HMS1000TVE water drainage outlet should be from 80 to100cm. 2).Check whether the program is properly selected. 3).Connect the power cable to the drainage pump to check whether the operation is normal. If not, make necessary replacement. IV .Unusual noise Possible causes 1.The packing screws should be disassembled. 2.The washer is placed too near a wall. 3.The washer is loaded over the standard capacity (5Kg). 4.There is foreign object other than fabrics in
ページ20に含まれる内容の要旨
Front Load Washer HMS1000TVE Possible causes 1.Gas leakage at pressure system of water supply. 2.The pressure switch is broken. Troubleshooting 1.Check whether the pipeline of pressure system is blocked or there is gas leakage. The pressure system includes: (1) Gas-collecting valve (2) Rubber pipe (3) Pipe clip2.Blow on the pressure switch and "click, click" can be heard. Otherwise, replace the pressure switch with a new one. VII .No heating or automatic heating Possi
