ページ1に含まれる内容の要旨
User's manual
XPB56-23S
Twin-tub Washing Machine
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions ...............................1
Installation and adjustment ..................3
Introduction of the major functions .......5
Using process
Preparation before washing ................6
The musts in washing .........................7
Usage of the detergent .......................8
Washing sequence ..............................9
Disposa
ページ2に含まれる内容の要旨
Before Using Before Using Names of the parts Water-filling entrance Outer cover of the spin tub Inner cover of the spin tub Water selector Spin timer Wash timer Spin tub frame Control panel Spin tub Overflow filter Quick water-filling entrance Water level adjusting lever Cabinet Drain hose hanging hole Earthing line Lint filter(Installed by user) Power cord Valve cover Pulsator Wash tub Wash tub cover Drain hose Base frame Meaning and description of the symbols Accessories Contents m
ページ3に含まれる内容の要旨
Before Using Before Using Safety precautions Please insert the power cord into special Be sure to pull the plug off when there's receptacle with rated voltage.Be sure to power failure, or the machine is being use single-phase two pins receptacle. moved, cleaned or when it is idle. The earthing line must be earthed reliably. If possible,please adopt electric leakage protector. Earth If the power cord is bad, to avoid risk it is required to replace it by the technicians of our speci
ページ4に含まれる内容の要旨
Before Using Before Using Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Handicapped or children withou
ページ5に含まれる内容の要旨
Before Using Before Using Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 10cm , or the drainage will not be smooth enough and cause <10cm incomplete drainage. 2.Do not tramp or press the drain hose.
ページ6に含まれる内容の要旨
Before Using Before Using How to change the direction of the drain hoses Figure 1 indicates the ex factory installation Back position of the drain hose. Soft item Extend the drain hose from the side of spin tub Front Put soft items on the ground. Lean the machine Figure 1 down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove. (See to Figure 2). Soft item Figure 2 Embed the drain hose into the groo
ページ7に含まれる内容の要旨
Using process Using process Introduction of the major function The machine has good comprehensive performance, and nice appearance. For the design on safety and reliability, it adopts the wash shelf, spin shelf and water inlet vessel design, and reduces the unfavorable influence on the electrical component by the vapor. Therefore it guarantees more safe and reliable washing.. It adopts complete enclosed base frame and low-noise motor, and thus reduces the working noise s
ページ8に含まれる内容の要旨
Using process Using process Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before w
ページ9に含まれる内容の要旨
Using process Using process The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest wash capacity of this mach- ine is 5.6 kg.The largest spin capacity of this machine is 5.0 kg. The thickness ,size , type of the cloth will influence the
ページ10に含まれる内容の要旨
Using process Using process Usage of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. How to use the washing powder Di
ページ11に含まれる内容の要旨
Using process Using process Washing sequence Wash timer Wash selector Water-filling entrance Spin timer (To set to below 2 minute, (standard current, (to set to below 1 minute, first set to 5 minute then strong current) first set to 2 minute then turn it back. it can increase turn it back. it can increase the service life of the timer). the service life of the timer). OFF OFF STRONG STAMDARD DRAIN Water-filling entrance 9 3 3 WASH SELECTOR WASH TIMER SPIN TIMER Wash 1. Fill the wa
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
Using process Using process Spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin Selection of the spin time list 3 (1) Put the gland in properly. Spin time Laundries (minutes) Please put in the gland properly even Bed sheet or if the laundries quantity is small. About 4~5 blanket Underwear About 2~4 (knitwear) Swear About 1~2 (chemical fiber) Blending thin Within 1 minute laundries (2) Close the inner and outer cover of the spin tub. Outer cover of The sp
ページ14に含まれる内容の要旨
ページ15に含まれる内容の要旨
ページ16に含まれる内容の要旨
ページ17に含まれる内容の要旨
Using process Using process Spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin Selection of the spin time list 3 (1) Put the gland in properly. Spin time Laundries (minutes) Please put in the gland properly even Bed sheet or if the laundries quantity is small. About 4~5 blanket Push Gland Underwear About 2~4 (knitwear) Push Swear About 1~2 (chemical fiber) Blending thin Within 1 minute The laundries laundries Proper Proper No gland are slanting (2) Close
ページ18に含まれる内容の要旨
Using process Using process Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. (
ページ19に含まれる内容の要旨
Using process Using process Cleaning the overflow filter 2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the Water level adjusting lever overflow filter ( as indicated in Corrugation Pipe Figure 1). 3. Cleaning the overflow filter Figure 1 Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).Install the corrugation pipe. Hook (2).Insert the mounting plate at
ページ20に含まれる内容の要旨
Trouble-shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, please take them out immediately. 1.Dismantle As indicated in the figure, push the point marked with " " to pull the spin tub frame to oblique Spin tub frame upwards to dismantle it. 2.Install After install the back edge of the spin tub frame to proper position, push the four points marked with " " by force to reset it. Spin tub Please
