ページ1に含まれる内容の要旨
Instructions for use
WASHER-DRYER
! This symbol reminds you to read this instruction manual.
GB
Contents
GB
English,1
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Description of the washer-dryer and
starting a wash cycle, 6-7
Control panel
Indicator lights
Starting a wash cycle
Wash cycles, 8
Table of wash cycles
Personalisation, 9
IWDD 7143 S
Setting the temperature
Setting the drying cycle
Functions
Detergents
ページ2に含まれる内容の要旨
Installation Levelling the machine correctly will provide it with stability, ! This instruction manual should be kept in a safe place for GB help to avoid vibrations and excessive noise and prevent it future reference. If the washer-dryer is sold, transferred or from shifting while it is operating. If it is placed on carpet or moved, make sure that the instruction manual remains with a rug, adjust the feet in such a way as to allow a sufficient the machine so that the new owner is able to
ページ3に含まれる内容の要旨
65 - 100 cm Connecting the drain hose • the supply voltage is included within the values i GB ndicated on the Technical details table Connect the drain hose, (see page 5); without bending it, to a draining duct or a wall • the socket is compatible with the washing drain situated between machine’s plug. If this is not the case, replace 65 and 100 cm from the the socket or the plug. floor; Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 am
ページ4に含まれる内容の要旨
As the colours of the wires in the lead may not correspond The first wash cycle GB with the coloured markings identifyng the terminals in your plug, proceed as follows: Once the appliance has been installed, and before you use Connect Green & Yellow wire to terminal marked E or it for the first time, run a wash cycle with detergent and no or coloured Green or Green & Yellow. laundry, setting the 90°C programme without a pre-wash Connect Brown wire to terminal marked L or coloured cycle.
ページ5に含まれる内容の要旨
GB Technical data Model IWDD 7143 S width 59.5 cm Dimensions height 85 cm depth 53.5 cm from 1 to 7 kg for the wash programme Capacity from 1 to 5 kg for the drying programme Electrical please refer to the technical data plate fixed to the machine connections maximum pressure 1 MPa (10 bar) Water connections minimum pressure 0.05 MPa (0.5 bar) drum capacity 52 litres Spin speed up to 1400 rotations per minute Wash: programme 1; temperature 60°C; using a load of 7 kg. Energy rated Drying: fir
ページ6に含まれる内容の要旨
Description of the washer-dryer and starting a wash cycle Control panel GB WASH CYCLE DELAY TIMER PROGRESS button START/ DISPLAY FUNCTION PAUSE ON/OFF button buttons with button with indicator lights indicator light TEMPERATURE DOOR LOCKED knob indicator light Detergent dispenser drawer WASH CYCLE DRYING knob knob Detergent dispenser drawer: used to dispense WASH CYCLE PROGRESS indicator lights: used to detergents and washing additives (see “Detergents and monitor the progress of the
ページ7に含まれる内容の要旨
Door locked indicator light Indicator lights GB When the indicator light is on, the porthole door is locked to prevent it from being opened; make sure the indicator The indicator lights provide important information. light is off before opening the door (wait approximately 3 This is what they can tell you: minutes). To open the door during a running wash cycle, press the START/PAUSE button; the door may be opened Wash cycle phase indicator lights once the DOOR LOCKED indicator light turns
ページ8に含まれる内容の要旨
The duration of the wash cycles can be checked on the display. Wash cycles Table of wash cycles GB Detergents Max. load (kg) Max. Max. Cycle Description of the wash cycle temp. speed Drying duration Fabric Eco (°C) (rpm) Wash Normal softener Time Daily 1 White Cotton: extremely soiled whites. 90° 1400 7 - 1 White Cotton (1): heavily soiled whites and resistant colours. 60° 1400 7 - 1 White Cotton (2): heavily soiled whites and delicate colours. 40° 1400 7 - 2 Cotton: heavily
ページ9に含まれる内容の要旨
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washer-dryer will automatically prevent you from selec- ting a temperature which is higher than the maximum value set for each wash cycle. Table of Drying times (guideline values) Setting the drying cycle Fabric Max. Cupboard Henger Iron Turn the DRYING knob to select the desired drying option. Load type ty
ページ10に含まれる内容の要旨
Detergents and laundry Silk: use special wash cycle 6 to wash all silk garments. Detergent dispenser drawer GB We recommend the use of special detergent which has Good washing results also depend on the correct dose of been designed to wash delicate clothes. detergent: adding too much detergent will not necessa- Curtains: fold curtains and place them in a pillow case or rily result in a more efficient wash, and may in fact cause mesh bag. Use wash cycle 6. build up on the inside of your app
ページ11に含まれる内容の要旨
Precautions and tips • Before loading laundry into the Washer-dryer, make sure ! This Washer-dryer was designed and constructed in GB the drum is empty. accordance with international safety regulations. The fol- lowing information is provided for safety reasons and must • During the drying phase, the door tends to get therefore be read carefully. quite hot. • Do not use the appliance to dry clothes that have General safety been washed with flammable solvents (e.g. • This appliance
ページ12に含まれる内容の要旨
Care and maintenance Cutting off the water and electricity Cleaning the pump GB supplies The washer-dryer is fitted with a self-cleaning pump which • Turn off the water tap after every wash cycle. This will does not require any maintenance. Sometimes, small items limit wear on the hydraulic system inside the washer- (such as coins or buttons) may fall into the pre-chamber dryer and help to prevent leaks. which protects the pump, situated in its bottom part. • Unplug the washer-dryer when c
ページ13に含まれる内容の要旨
Troubleshooting Your washer-dryer could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that GB the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power to the socket, or the fuse has blown in the mains plug. The wash cycle does not start. • The door is not closed pro
ページ14に含まれる内容の要旨
The machine is noisy. • There will always be some motor, pump and drum noise during spin. GB The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy it
ページ15に含まれる内容の要旨
Assistance 12 Months Parts and Labour Guarantee GB Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions:
ページ16に含まれる内容の要旨
195079937.01 06/2010 - Xerox Fabriano After Sales Service GB No one is better placed to care for your Indesit appliance during the course of its working life than us - the manufacturer. Essential Contact Information Indesit Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.indesitservice.
