ページ1に含まれる内容の要旨
Twin-tub Washing Machine
User's manual
This manual is for
HWM110-287S
Please read this manual
carefully before using.
Retain it for future reference. 0030808445
ページ2に含まれる内容の要旨
Contents Names of the parts - - - - - - - - - - - - - - - - - 1 Safety precautions - - - - - - - - - - - - - - - - - 2 Installation and adjustment - - - - - - - - - - - 4 Preparation before washing - - - - - - - - - - 6 The musts in washing - - - - - - - - - - - - - - - 7 Usage of the detergent - - - - - - - - - - - - - 7 Washing sequence - - - - - - - - - - - - - - - - - 8 Disposal after washing - - - - - - - - - - - - - - - 12 Trouble-Shooting *Answer to question - - - - 14 Packing li
ページ3に含まれる内容の要旨
Names of the parts Overflow filter Outer cover of the spin tub Wash selector Inner cover of the spin tub Wash timer Spin timer Water-filling entrance Major frame Control panel Spin tub Water-filling translation Ë®µÀ Water level adjusting lever Cabinet Lint filter Valve cover Pulsator Wash tub Ba ºó¸Ç ck cover Wash tub cover Drain hose Base frame Notes: All illustrations in this manual are given for reference only. Your products and accessories may show differences from thes
ページ4に含まれる内容の要旨
Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage. Be sure to use single-phase at the location easily to be insert- three pins receptacle. The earthing ed and extracted by hand. Be sure terminal of the receptacle must be to pull the plug off when there's earthed reliably. If possible, please power failure, or the machine is adopt electric leakage protector. being moved, cleaned or whe
ページ5に含まれる内容の要旨
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Keep the machine away from direct Handicapped or chi
ページ6に含まれる内容の要旨
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than 10cm , or the drainage will <10cm not be smooth enough and cause incomplete drainage. 2.Do not tramp or press the drain hose. 3.If the drain hose is
ページ7に含まれる内容の要旨
How to change the direction of the drain hoses Figure 1 indicates the ex factory installation Side sectional view position of the drain hose. Drain hose Fixing hook fixing hook installation hole Extend the drain hose from the side of spin tub Drain hose Pull outwards Take off the drain hose from the hanging hole slightly of the cabinet. Pull the drain hose fixing hook Take off outwards gently to take out the drain hose the drain hose from the two fixing hooks. (As per Figure 2) Dr
ページ8に含まれる内容の要旨
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before washing the laundries Check
ページ9に含まれる内容の要旨
The musts in washing The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influ- ence the actual washing capacity. It is suit- able to put in reasonable amount of laundries and the laundries can be turned round in wash- i
ページ10に含まれる内容の要旨
Washing sequence Wash timer Wash selector Spin timer (To set to below 2 minute, (standard current, (to set to below 1 minute, first set to 6 minute then Water inlet strong current) first set to 2 minute then turn it back. it can increase turn it back. it can increase the service life of the timer). the service life of the timer). OFF STRONG Ç¿Ï´ OFF STANDARD ±ê×¼ DRAI ÅÅË® WASH SELECTOR WASH TIMER SPIN TIMER Wash 1.Water-filling selector WASH SPIN Set the water inlet sele
ページ11に含まれる内容の要旨
Ï´µÓÐëÖª Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is small. Push Gland Push Proper The laundries Proper No gland are slanting (2) Close the inner and outer cover of the spin tub. Outer cover of The spin tub Inner cover of The spin tub (3) Spin for 1-2 minutes. WASH SPIN 3.Run the foam-removing spinning. (1) Set the water-filling selector contro
ページ12に含まれる内容の要旨
Rinsing Rinse with water-filling 1.Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. (Repeat the midway spinning and rinsing with stored water for 2-3 times) Rinse with stored water
ページ13に含まれる内容の要旨
Spinning 1. Put the laundries into the spin tub evenly and smoothly. 2. Press the gland in the tub properly. Close the inner and outer cover of the spin tub. 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. In spinning, it will pause the work if y
ページ14に含まれる内容の要旨
Disposal after washing After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Press the elastic piece at upper end of lint filter to release the tab from the filter cover, and pull the lint
ページ15に含まれる内容の要旨
Cleaning the overflow filter 2. Take off the corrugation pipe. Water level Dismantle the upper part of the adjusting lever corrugation pipe inside the overflow filter ( as indicated in Corrugation Figure 1). Pipe 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. Figure 1 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Insert the mounting plate at Hook the bottom of the fi
ページ16に含まれる内容の要旨
Trouble-shooting Answer to question When the remained water is frozen Prevent the freezing (be sure to discharge the water completely after using) After complete draining, set the "WASH SELECTOR" at "STRONG" or "STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen water to melt. Below 50 c 2~3L When the water is frozen Pour hot water below 50 into the wash tub to soak it completely. Then turn the pulsator with hands gently. Please confirm the drai
ページ17に含まれる内容の要旨
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason Is there power failure? Is the power plug loose? T
ページ18に含まれる内容の要旨
Packing list Quantity Name One piece User's manual One piece Water inlet hose One piece Gland One set Twin-tub washing machine Speciafication Water level/Water quantity (L) (about) Maximum/70 Medium/60 Minimum/50 Injection pressure(MPa) 0.02 0.2 Washing capacity(kg) 8.0 Spinning capacity(kg) 6.0 16
