ページ1に含まれる内容の要旨
USER MANUAL
Automatic Drum
Washing Machine
HWD-D1200TXVE
HWD-D1200TXVEME
HWD-D1000TXVE
HWD-D1000TXVEME
ページ2に含まれる内容の要旨
Table of contents page no. Before use Parts .......................................................................................................... 1 Safety instructions ................................................................................. 2 - 4 Installation ............................................................................................ 5 - 6 Functions .............................................................................................. 7 - 8 Using the app
ページ3に含まれる内容の要旨
Parts Top panel Detergent Power button dispenser Selection dial Display Door Door handle Porthole Power cable Packing bolts (3) Earthing terminal Back plate screws (3) Hose clip Drain hose Back plate This diagram may vary slightly with the layout of the washing machine you have just purchased due to technical improvements. NOTICE Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the app
ページ4に含まれる内容の要旨
Safety instructions Using your appliance will be simple, but please make sure read the following to get the best out of it and to ensure your own safety. BEFORE sWITChING ThE applIaNCE ON FOR ThE FIRsT TIME: DO ✓ Ensure you connect the appliance directly to a domestic mains water supply. ✓ Ensure that the appliance is situated on a firm level base. ✓ Ensure that the electrical system meets the requirement laid out in the installation section of this document. ✓ Use a separate earthed socket f
ページ5に含まれる内容の要旨
DURING DaIl Y UsE OF ThE applIaNCE DO ✓ Unplug the appliance before carrying out any maintenance or repair. ✓ Hold the plug and not the electric cable when unplugging the washing machine. ✓ Keep the door slightly open when not in use to prevent formation of odours. ✓ After each wash programme, turn off the machine and switch it off at the mains to save electricity and for safety. Wipe clean the lower part of the porthole. ✓ Pull up zips and fix loose threads to prevent the items from being
ページ6に含まれる内容の要旨
Safety instructions Electrical connection (UK ONl Y) For your safety please read the following information Warning: This appliance must be earthed. The appliance must be connected to a 220 volt 240 cycle AC supply by means of a three pin socket, suitably earthed and should be protected by a 13 amp fuse. The appliance is supplied with a standard 3 pin mains plug fitted with a 13 amp fuse. Should the fuse require replacement, it must be replaced with a 13 amp fuse approved to BS1362. The plug
ページ7に含まれる内容の要旨
Installation Caution: protective gloves should be warn • Remove all the packing materials 1 (including the foam base) to prevent vibration during use, as show in Fig. 1. On opening, water drops may be visible on the appliance. This is a normal phenomenon. • Check that the appliance is also supplied with the following: User Quality Water Plastic Hose clip manual certificate hose plugs Quantity 1 1 1 1 3 • Remove the packing bolts as shown in 2 Fig. 2. The packing bolts are designed for
ページ8に含まれる内容の要旨
Installation Water inlet hose nut Connecting the hose to the cold water supply 1. Connect the nut on the water inlet hose to the connector on the water valve. Ensure all seals are in place. Water inlet valve connector 2. Tighten the nut to secure the hose. Drain hose • The height of the drainage outlet must be between 80-100cm. To prevent the drain hose from dropping, attach it using the drain hose clip at the back of the washing machine. • Use the hose clip to secure the end of the dr
ページ9に含まれる内容の要旨
Con t r ol pa n el C F E L D A Wash Wash Rinse Spin Dry Quickwash Rinse Wool Spin Synthetics Dry Delay Extra rinse Dry Time Start/Pause Cotton&Linen Iron Prewash Air wash I K J H G B A. Power button G. Start/Pause button B. Programme selection dial H. button C. Detergent distribution drawer I. Dry button D. Spin speed setting button J. Extra rinse button E. Display K. Delay button F. Wash status indicator L. Wash temperature button Fun ct ion s A. Power button Press this butto
ページ10に含まれる内容の要旨
Functions G. start/pause button When the washing machine is connected to the power socket and a programme is selected, touch this button to start operation. Touch this button again during operation to pause the programme. The display screen will flash and the machine will be paused. Press the button again and the programme will continue. h. button Economy wash. This function automatically adjusts water consumption, wash time and heating time. The wash load range is: Prewash: 1kg~6
ページ11に含まれる内容の要旨
Programme selection guide Detergent setting Default Default setting laundry setting Comp 1 Comp 2 Comp 3 Prewash * 30°C 40°C 1200rpm 1 ★ O ★ Heavy-soiling 50°C 60°C 90°C 40°C Cotton & Linen * 30°C 40°C 1200rpm 2 O X ★ Cotton fabric 50°C 60°C 90°C 40°C Synthetics * 30°C 40°C 1200rpm 3 ★ O X Synthetic fabrics 50°C 60°C 40°C Wool 4 * 30°C 40°C * ★ O X Wool fabrics Quick Wash Lightly-soiled 1200rpm 5 * 30°C 40°C O X ★ cotton, linen and 40°C synthetic fabrics Wash * 30°C 40°C 6 Cotton, linen and 4
ページ12に含まれる内容の要旨
Preparing for a cycle Detergent selection Only special low foam detergent should be used in automatic drum washing machines. For blended or wool fabrics, special detergent should be used. Dry cleaning solvent should not be used. Caution: do not use too much detergent. laundry treatment • Sort out clothes according to type and extent of dirt. There are three types of clothes; cotton, synthetic and woollen (silk) fabrics. • Separate white clothes from coloured clothes. If whites and coloureds
ページ13に含まれる内容の要旨
Programme times NO. Program Default time (minute) 1 Prewash 133 2 Cotton & Linen 116 3 Synthetic 72 4 Wool 60 5 QuickWash 12 6 Wash 61 7 Rinse 24 8 Spin 11 9 Dry 150 10 Iron 60 11 Air wash 30 Using your appliance 1. loading Open the door, put in the laundry piece by piece and then tightly close the door. Notes: 1) Before the first run of the appliance it is advisable to run the machine empty on a quick wash with no detergent to clean through the system. 2) Do not overload the washing machi
ページ14に含まれる内容の要旨
Using your appliance 3. selecting washing programme To get the best wash, an appropriate washing programme should be selected according to the type of laundry. 4. Washing temperature settings Set the washing temperature as required, otherwise set at position * when a cold wash is acceptable. 5. Function selection buttons Select functions as required (refer to the “Functions” section). Otherwise keep all the buttons deselected. 6. Washing Press the Start/Pause button and the washing mach
ページ15に含まれる内容の要旨
Other functions 1. Control panel lock function: To prevent children from accidentally changing the settings, the control panel can be locked by pressing the “Temperature” and “Delay” buttons at the same time. After the panel is locked, the sign “LOCK” and the remaining wash time will be displayed on the LED alternately. Now all the function keys except the power switch are locked. Press the key combination again to cancel this function. 2. power-off memory function: This machine has a powe
ページ16に含まれる内容の要旨
Maintenance 1. Turn off the water tap and pull out electricity plug after each wash. Open the porthole to prevent formation of moisture and odours. If the washing machine is left idle for a long period, drain the water in the machine and replace the drain hose. 2. Unplug the machine during cleaning and maintenance. Use a soft cloth dampened with soap liquid to clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents. 3. Clean the detergent distributio
ページ17に含まれる内容の要旨
Maintenance 5. To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet and inlet filter regularly. 6. If the machine is to be moved to a distant place, replace the vibration absorbing locks (packing screws, rubber gaskets) removed before installation to prevent damage as shown below. Remove the lock cover and take out the three Insert the transit bolts. Insert the rubber gaskets. rubber plugs. Tighten with a spanner. Replace the back cover. 7. If t
ページ18に含まれる内容の要旨
Trouble shooting In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below. If the problem persists, contact an approved service engineer. If an error code is displayed, please refer to the error code guide below. problem possible cause how to correct the problem • Incorrect connection to power supply • Check power supply. The washing machine • Power failure • Check that door is properly fails to operate • Door is not properly closed closed.
ページ19に含まれる内容の要旨
Tech n ica l speci- ca t ion M odel / Item HWD-D1000TXVE/M E HWD-D1200TXVE/M E Power Source 220-240 V/ 50Hz 220-240 V/ 50Hz Working Current 10 10 (M ax) (A) Tap Water Pressure 0.03 P 1 0.03 P 1 (M Pa) Washing Power (W) 200 200 Spinning Power (W) 350 450 M ax Load (kg) 6 6 Spinning Speed (M ax) 1000 1200 (r/min) Washing Procedure 11 11 Water Heating Power 1000 1000 (W) Heating Power (W) 1000 1000 External Dimension 850 x 590 x 595 850 x 590 x 595 (HxDxW ) mm Weight (kg) 82 82 Washing N ois
ページ20に含まれる内容の要旨
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent po
