ページ1に含まれる内容の要旨
User's manual
Fully automatic washing machine
This manual is for
HWM62-0566
Please read this manual
carefully before using.
Retain it for future reference.
ページ2に含まれる内容の要旨
Contents Names of the parts Safety precautions Installation and adjustment Usage of the drain hose Installation the water inlet hose Preparation before washing Put in the laundries Usage of the detergent Close the top lid Use the operation buttons Finish washing Disposal after washing Trouble shooting Answer to question * * Packing list Specification
ページ3に含まれる内容の要旨
Names of the parts Water inlet Water absorption Top lid component valve cushion Control panel seat Inner cover component Liquid whitener inlet Filter cover Detergent box Liquid whitener inlet Attachment block Power line Lint filter Handle Inner tub Hang hole of Back cover Pulsator drain hose Front control board Drain hose Cabinet Adjustable foot seam Base Fixed leg Adjustable leg (3 pieces) Notes: All illustrations in this Manual are given for reference only. Your products and
ページ4に含まれる内容の要旨
Safety precautions When the machine is normally Please insert the power cord into using, please put the power plug special receptacle with rated vol- at the location easily to be insert- tage.Be sure to use single-phase ed and extracted by hand. Be sure three pins receptacle.The earthing to pull the plug off when there's terminal of the receptacle must be power failure, or the machine is earthed reliably.If possible,please being moved, cleaned or when it adopt electric leakage protector
ページ5に含まれる内容の要旨
Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items (such Do not wash laundries with volatile as the kettle with hot water ) on the materials (such as thinner, petrol etc.) washing machine. The handicapped or children without Keep the machine away from direct care shall not use the machine
ページ6に含まれる内容の要旨
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover component Before using the washing machine firstly, please install the inner cover component. 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming the inner cover shaft to the installation hole of the corresponding outer
ページ7に含まれる内容の要旨
How to change the direction of the drain hose 1.Loosen the screws of back cover, dismantle the back cover, then take off the drain hose(As indicated figure 1) Figure 1 Drain hose frame 2.Take off the drain hose from base, nip flat the drain hose mouth, dismantle the hang hook, take the drain hose into cabinet from the left of base As indicated figure 2) Figure 2 nip flat the drain hose mouth, dismantle the hang hook 3.Extend the drain hose from the right side of base, fix t
ページ8に含まれる内容の要旨
Installation the water inlet hose Confirm the water faucet water faucet, suitable water faucet, not suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock leve
ページ9に含まれる内容の要旨
Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the nut of the water cushion is dropped or damaged before each usage. If it happens inlet hose please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer. 3 Fasten the nut. Swing it gently to confirm if it's suitable. water absorption jointer of the cushion. water inlet valve Connection between the jointer of the water i
ページ10に含まれる内容の要旨
1 Preparation before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. 3.Put down the drain hose. 4.slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally Pay attention to followings before w
ページ11に含まれる内容の要旨
2 Put in the laundries The capacity of washing and spinning of he machine refer to the largest weight ofthe standard laundries under dry conditionthat can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned roun
ページ12に含まれる内容の要旨
START/PAUSE PROCESS/FUNCTION 4 Close the top lid Except draining, if the top cover is opened, the washing machine will stop running and alarm. 5 Use the operation buttons Description of the function of buttons Reserve/remain time indicator digitron Mode and meaning of the indicators During sensing, it displays -- During reserve procedure, it displays the remained The light is off reserve time (in hours) During operation of programs, it displays the re- Flashing: indicate the running progr
ページ13に含まれる内容の要旨
Water level button Program button "Power" button Following automatic programs are available for selection Push the "power" button to switch on the power. Applicable situation Program Under power-on mode, push it to switch off the power. Common Common washing Push the "power" button to switch on the power. If Quick Quick and high-efficiency wash for common laundries the "start/pause" button is not pushed, the machine Super quick wash of the laundry under 1 kg with light soil Posthaste will swi
ページ14に含まれる内容の要旨
START/PAUSE PROCESS/FUNCTION b Steps of using the operation buttons and description of each step. LIGHT FLASH LIGHT FLASH FUZZY SURPLUS MINUTES STANDARD COMMON SOAK HEAVY WASH WASH HEAVY RINSE QUICK FIBRE RINSE HEAVY SPIN POSTHASTE COTTON SPIN JEANS GENTLE SPIN TUB DRY RESERVE HOURS RESERVE Push the "POWER ON/OFF " button to switch on the power. It has the special power resume function. In the case of power failure or the power plug is loose during washing, the machine can save POWER the runnin
ページ15に含まれる内容の要旨
Procedure program selection method( PROCESS select state Times of pushing the Contents (the lighted indicators Selected procedure Applicable circumstance PROCEE/PROGRAM indicate the programs about to run) programe button SOAK WASH RINSE SPIN When the common laundries need WASH RINSE SPIN washing, rinsing and spinning. standard program WASH SOAK WASH RINSE SPIN Repeat using the washing liquid (the washing liquid remains in the tub) When prevent the laundries from WASH RINSE SOAK WASH RINSE
ページ16に含まれる内容の要旨
7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may I nfluence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel seat. 1.The method of dismantle:Push it up aslant and gently. 2.The method of install : install it upwards and aslant Dismantle and push it in . Install The lint filter m
ページ17に含まれる内容の要旨
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenan The reason How to settle Close the top lid. The top lid
ページ18に含まれる内容の要旨
Packing list Name Quantity One piece User's manual Warranty card One piece Water inlet hose The end connecting to the washing machine One piece Jointer connecting the water inlet hose to the water faucet The end connecting to the water inlet hose jointer One piece Bottom plate Put into the innner tub Tapping screws One piece Inner cover component One piece Put into the inner tub Fully automatic washing machine One set Specification Water level/Water quantity (about) Injection pressure 0.03MP
