ページ1に含まれる内容の要旨
QMS SC-100
User's Manual
ページ2に含まれる内容の要旨
Trademarks Copyright All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior Material scanned by this product may be protected by governmental laws and other regulations, such as copyright laws, the customer is solely responsible for complying with all ii
ページ3に含まれる内容の要旨
Warranty without notice. this material, including, but not limited to, the implied The manufacturer shall not be liable for errors contained herein or for incidental or consequential damages in connection with iii the furnishing, performance, or use of this material. warranties of fitness for a particular purpose. The manufacturer makes no warranty of any kind with regard to The information contained in this document is subject to change
ページ4に含まれる内容の要旨
FCC Radio Frequency Interference Statement Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. iv could void your authority to operate the equipment. expressly approved by the party responsible for compliance You are cautioned that changes or modifications not interference at his own expense. which case the user will be required to correct the residential area is likely
ページ5に含まれる内容の要旨
Table of Contents 1. INTRODUCTION............................................................1-1 2. QMS SC-100 INSTALLATION......................................2-1 ................................ ................................ .......... 2-1 ................................ ................ 2-2 ................................ ...................... 2-3 . 2-3 2-4 ................................ ....................... 2-5 3. QMS SC-100 DRIVER INSTALLATION......................3-1 ..........
ページ6に含まれる内容の要旨
1. INTRODUCTION Congratulations on your purchase of QMS SC-100. QMS SC-100, as the name suggests, is a scanner and a digital copier. Integrated with the module of scanner and copier, QMS SC-100 allows you to edit your image and produce a far better printing quality than a normal copy Introducing an innovative digital solution, QMS SC-100 produces better printing quality and is free maintenance compared with a traditional copy machine. Its high The following sections introduce the unpacking, h
ページ7に含まれる内容の要旨
ページ8に含まれる内容の要旨
Package Contents 1. Software CD 2. Power Adapter 3. 4. 5. 1-3 QMS SC-100 main unit Quick Installation Guide QMS SC-100 Cable
ページ9に含まれる内容の要旨
2. QMS SC-100 INSTALLATION 2.1 PRECAUTIONS Be sure to use the proper AC power source. 2-1 materials for shipping purposes. Retain the QMS SC-100 box and packing mechanical or paper-feeding problems. surface. Tilted or uneven surfaces may cause Place the QMS SC-100 securely on an even, flat dusty place. Do not install the QMS SC-100 in a humid or cause damage to the unit. Direct exposure to the sun or excessive heat may Keep the QMS SC-100 out of direct sunlight.
ページ10に含まれる内容の要旨
2.2 UNLOCKING THE QMS SC-100 Use Figure 2-1 Unlocking the QMS SC-100 2-2 1. “Shipping” Position 2. “Use” Position position.(See Figure 2-1) 100 by moving the lock switch to the the QMS SC-100, it is required to unlock QMS SC- switch under the main unit. Therefore, before using shipment, the QMS SC-100 is designed with a lock To protect the scanning head from damage during
ページ11に含まれる内容の要旨
2.3 CONNECTING THE CABLE 2.3.1 CONNECTING QMS SC-100 TO WORK AS A COPIER 1. 2. 3. 4. 5. 6. Figure 2-2 Connect QMS SC-100 to a printer 2-3 Printer Power Adapter Power Jack Printer Cable “To Printer” port QMS SC-100 main unit below. Connect the power cable and signal cable as shown
ページ12に含まれる内容の要旨
2.3.2 CONNECTING QMS SC-100 TO WORK AS A SCANNER 1. 2. 3. QMS SC-100 Cable 4. PC Parallel Port 5. Figure 2-3 QMS SC-100 Cable Connection 2-4 Printer Cable Power Adapter QMS SC-100 main unit
ページ13に含まれる内容の要旨
2.4 DOCUMENT PLACEMENT 1. 2. 3. 4. Figure 2.4 Document Placement 2-5 5. Control Panel Document Glass Document Home Position Mark Document Cover glass with the text facing away from you. As shown in Figure 2-3, place the document on the
ページ14に含まれる内容の要旨
3. QMS SC-100 DRIVER INSTALLATION • • • • • • • (e.g., mouse); • 3.1 INSTALLATION PROCEDURE 1. Start Windows 3.1 or Windows 95. In Windows 3.1 or higher 3. 100.exe (d represents the letter for your current CD- 3-1 ROM drive). Click O.K. From the File Menu, choose RUN, type d:\driver\SC- 2. Insert software CD into your CD ROM drive. follows: Installation procedures of QMS SC-100 driver are as A CD ROM drive. A Microsoft Windows-compatible pointing device A video graphics array (VGA
ページ15に含まれる内容の要旨
In Windows 95 or Windows NT 3. Press the Start button, choose RUN, type d:\driver\SC- O.K. (See Figure 3-1,3-2) Fig. 3.1 Fig. 3.2 3-2 installation. 4. Follow the on-screen instructions to complete the 100.exe (d: the CD-ROM drive in use), and then click
ページ16に含まれる内容の要旨
3.2 UNINSTALL THE QMS SC-100 DRIVER the Uninstall . 3-3 command from the QMS SC-100 Start>Programs>QMS SC-100 and double clicking on You can uninstall the QMS SC-100 driver by selecting
ページ17に含まれる内容の要旨
4. USING QMS SC-100 AS A COPIER 4.1 THE CONTROL PANEL 10. Message Display window: Display current settings. 11. Background Remove: without the background color or off to print your document with the background 12. Paper Size: 13. Lighter/Darker: Lighten or darken your image. Increase level of brightness or darkness by the ( ) button. ( ) button. 14. Reduce/Enlarge: Press to select the preset ratio: 100%, 115%, 122%, 141%, 200%, 86%, and 50%. Choose your desired ratio or adjust the ratio in
ページ18に含まれる内容の要旨
1. Copy: Press to start copy. 2. Power/Copy LED: The LED indicator turns green when power is on and turns 3. All Clear: Clear your current settings and return to the default settings. 4. Copy Quality: Normal (300 dpi), or Quality (600 dpi). 5. Copy Count: numeric entries by the ( ) button or decrease the value by the ( ) button. 6. Select: Select your printer model. (Currently QMS SC-100 supports only PCL printer, therefore, as long as your printer has PCL emulation, it is not necessa
ページ19に含まれる内容の要旨
Tips: Note: (1). * (2). IMPORTANT! PRINTER MEMORY To make good use of QMS SC-100, it is recommended to 4-3 ensure a successful print out. We strongly recommend you to refer to the following table to using this feature requires more processing time and memory. Copy Quality, you need to add more RAM for your printer as print your document using Quality mode - 600 dpi as your install at least 1 MB of memory in your printer. If you want to Quality, 100% ratio. The default settings are: Lett
ページ20に含まれる内容の要旨
Copy Quality Document Size Min. Printer Memory 1 MB 2 MB 4 MB 5 MB 1. The printer does not print. 2. 4-4 The Printing quality is bad. probably encounter the following results: If there is not enough memory in your printer, you may Legal Size Letter Size Quality Legal Size Letter Normal
