ページ1に含まれる内容の要旨
OUTDOOR STORAGE
MODEL N° 60014
OWNER’S MANUAL
Keep this Identification Number in case you must contact our Customer Service Department.
Copy
ページ2に含まれる内容の要旨
IMPORTANT! PLEASE READ BEFORE BEGINNING ASSEMBLY Dear Valued Customer, We would like to congratulate you on your purchase of a Lifetime© Outdoor Storage Shed! We are confi dent that you have made the perfect choice and you will be very pleased with your new storage solution. Lifetime© Outdoor Storage is part of the family of products created and manufactured by Lifetime® Products, Inc. Like all of our products, you can be assured that the quality of your Lifetime Outdoor Storage Shed is the
ページ3に含まれる内容の要旨
IMPORTANT! PLEASE READ BEFORE BEGINNING ASSEMBLY inventory of the parts included with your Outdoor Storage Shed. Also, read through the entire instruc- tion manual. It’s always a great practice to get a feel for the fl ow of the process and to familiarize your- self with the parts involved. But, try not to get ahead of yourself and start the process out of order. learned what that correct order should be. In our state-of-the-art research and testing facility, we have painstakingly creat
ページ4に含まれる内容の要旨
REGISTER YOUR LIFETIME PRODUCT TODAY! There are benefi ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com and enjoy these great benefi ts: promotions! But you will need to provide a sales receipt to verify your product purchase date before warranty service will be provided. LIFETIME’S PROMISE TO YOU: Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that
ページ5に含まれる内容の要旨
BEFORE BEGINNING ASSEMBLY Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department. Identify and inventory all parts and hardware using the parts and hardware lists and identifi ers in this document. *Two adults required to complete assembly* (+ one adult suggested as an instruction reader) Only adults should set up the product. Do not allow children in the set-up area until assembly is complete. TOOLS REQUIRED FOR THIS ASSEMB
ページ6に含まれる内容の要旨
ASSEMBLY GUIDES Refer to the following areas throughout the instructions to assist in the assembly process: TOOLS AND HARDWARE REQUIRED FOR THIS PAGE This area is located at the top, left-hand corner of the page and indicates which tools and hardware are needed to complete the assembly steps on a page. # This area is located at the top, right-hand corner of the page and shows an image of the product with shaded parts indicating which section is being assembled. This area is usually locate
ページ7に含まれる内容の要旨
IMPORTANT NOTICES Level Surface Notice: Surface must be leveled before installation. We recommend building a level work space with a concrete or patio style surface. If the surface is not properly leveled, the Outdoor Shed will not assemble correctly. Proper surface leveling will save you time in the long run, so please do not ignore this step. Building Code Notice: Consult all local building codes, as well as city and county ordinances, to ensure that the construction of the Outdoor Shed doe
ページ8に含まれる内容の要旨
PARTS & HARDWARE LIST BOX 1 SHED PARTS BOX ID Description Qty ID Description Qty BYJ LEFT DOOR ASSEMBLY HARDWARE AHD Wall Panel 5 AHH Window Wall Panel 1 AHE Window 1 BYU SMALL PARTS BOX BZC Tube of Caulking 1 AIW Wood Block 1 BYC FLOOR ASSEMBLY HARDWARE BYE WALL INSTALLATION HARDWARE CIF End Cap 1 BYK RIGHT DOOR ASSEMBLY HARDWARE BYD TRUSS ASSEMBLY HARDWARE (x2)
ページ9に含まれる内容の要旨
PARTS IDENTIFIER BOX 1 SHED PARTS BOX AGR AFX (x1) Outer Floor Panel Center Floor Panel AGQ Roof Panel AHE (x1) Window AHD (x5) AHH (x1) AGL (x1) Wall Panel Window Wall Panel Corner Wall Panel SMALL PARTS BOX [BYU] BYX *BZC (x1) *AIX BYW Roof End Cap Filter Tube of Caulking Wood Shim Roof End Cap 26 11/16” *AIW (x1) Wood Block BYY (x6) Roof Support Tube 9
ページ10に含まれる内容の要旨
PARTS IDENTIFIER BOX 1 (CONT.) FLOOR ASSEMBLY HARDWARE [BYC] Hardware shown at actual size BQC AHO Door Hinge Bushing WALL INSTALLATION HARDWARE [BYE] Hardware shown at actual size ADZ (x80) ADV (x6) TRUSS ASSEMBLY HARDWARE [BYD] (x2) Hardware shown at actual size ADY ADK ADJ BXU (x1) BXV (x1) BXW (x1) Truss Connector A Truss Connector B Truss Connector Bracket 9 3/4” ADH (x1) 10
ページ11に含まれる内容の要旨
PARTS IDENTIFIER BOX 1 (CONT.) GABLE ASSEMBLY HARDWARE [BYF] Hardware shown at actual size ADZ ADV (x6) WINDOW ASSEMBLY HARDWARE [BYG] Hardware shown at actual size (*Unless noted otherwise) ADZ *AIS (x1) Window Latch TOOL BAG [BYH] Hardware shown at actual size ARA (x1) ADC (x1) 1/8” Drill Bit DOOR & ENTRY GABLE INSTALLATION HARDWARE [BYI] Hardware shown at actual size ADZ (x17) AHP BFY (x5) ADJ (x5) Cotter Pin ADX BXZ (x16) BYM (x1) Strike Plate 11
ページ12に含まれる内容の要旨
PARTS & HARDWARE IDENTIFIER BOX 1 (CONT.) LEFT DOOR ASSEMBLY HARDWARE [BYJ] Hardware shown at actual size BZA CAV ADW (x5) BLB BYZ CHK (x1) Screw ADJ ADK CIF (x1) 1” Square End Cap AEE (x9) AEB BZB BYS (x1) Outer Door Handle BYN (x1) BYO (x1) Door Latch Door Latch Bracket BYQ BYP BYR (x1) Deadbolt Latch Deadbolt Latch Bracket Inner Door Handle TRUSS, REAR GABLE, & ROOF INSTALLATION HARDWARE [BYL] Hardware shown at actual size ADZ (x91) ADV BYT (x16) (Not all screws will be used)
ページ13に含まれる内容の要旨
PARTS & HARDWARE IDENTIFIER BOX 1 (CONT.) RIGHT DOOR ASSEMBLY HARDWARE [BYK] Hardware shown at actual size ADW (x1) BYZ CIF (x1) 1” Square End Cap CHK (x1) AEE (x1) Screw BYR (x1) Inner Handle BBI (x1) BYS (x1) Inside Door Handle Outer Handle BOX 2 SHED PARTS BOX AGO (x1) Left Door AGQ Roof Panel AGL AGZ (x1) Corner Wall Panel Right Door AGF (x1) AGH (x1) AGI (x1) BYV (x1) Skylight 13
ページ14に含まれる内容の要旨
PARTS & HARDWARE IDENTIFIER BOX 2 (CONT.) METAL KIT [BZD] 43 1/4” 40” AFG AFH Truss Brace 67 3/4” AFM (x5) Wall Support Channel 78 3/8” BXX (x1) Rear Wall Support Square Tube 54 3/8” AFE (x1) Entry Header Bar 70 7/8” BYA (x1) Left Angled Door Jamb 72 3/8” BYB (x1) Right Angled Door Jamb 49” BXT (x1) Window Wall Support Channel 77” CHH Door Hinge Tube 75” CHI Door Square Tube 14
ページ15に含まれる内容の要旨
7’ 83 3/8” 7’ TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 Concrete (1 cu. yd.) SITE PREPARATION - CONCRETE PLATFORM PREPARATION SEC The actual dimensions of your shed (at its widest and longest points) are 7’ x 7’. Ensure you select a site that will 1.1 accommodate these measurements. The base of the shed is slightly smaller than this, so you will need to create surface. This will provide the best long-term performance for your shed. 7’ 81 1/2” 7’ Front Note: Surface must be leveled be
ページ16に含まれる内容の要旨
83 3/8” TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 2” x 4” x 81 1/2” Treated Board 2” x 4” x 80 3/8” Treated Board (x7) 16d 3” Common Nail ALTERNATIVE SITE PREPARATION: OPTION 1 - WOOD PLATFORM ASSEMBLY SEC Ensure you use lumber that is treated and approved for outdoor use. Build outside frame to 81 1/2” Wide x 83 3/8” 1.2 Long. Note: Whenever possible you should use the surfaces described on Page 7. When this is not possible, we recommend you use a wood platform or a ! fi lled wood frame
ページ17に含まれる内容の要旨
33 1/2” x 83 3/8” 48” x 83 3/8” TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 33 1/2” x 83 3/8” x 3/4” Treated Plywood (x1) 48” x 83 3/8” x 3/4” Treated Plywood (x1) 8d 1 1/2” Common Nail ALTERNATIVE SITE PREPARATION: OPTION 1 - WOOD PLATFORM ASSEMBLY (CONT) SEC Square up the frame by measuring from corner to corner. Measurement A should equal Measurement B. 1.3 Note: All lumber must be rated for outdoor use. ! A SEC Cut Plywood into sizes called for above. Arrange the Plywood according to the
ページ18に含まれる内容の要旨
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 2” x 4” x 81 1/2” 2” x 6” x 76 3/8” L-Bracket 8d 1 1/2” Common Nail (x16) Pea Gravel (7.5 Cubic Feet) ALTERNATIVE SITE PREPARATION: OPTION 2 - FILLED WOOD FRAME ASSEMBLY SEC Lay boards fl at so widest part faces up. 1.5 Ensure frame is level. Square up the frame by measuring from corner to corner. Measurement A should equal Note: Whenever possible you should use the surfaces described on Page 7. ! 81 1/2” Note: All lumber must be rated
ページ19に含まれる内容の要旨
FLOOR ASSEMBLY 2 HARDWARE REQUIRED (BYC) Hardware shown at actual size BQC AHO Door Hinge Bushing METAL PARTS REQUIRED NO METAL PARTS REQUIRED FOR THIS SECTION PLASTIC PARTS REQUIRED AGR AFX (x1) Outer Floor Panel Center Floor Panel TOOLS REQUIRED Phillips Screwdriver Safety Glasses 19 SEC
ページ20に含まれる内容の要旨
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 2 NO HARDWARE REQUIRED FOR THIS PAGE FLOOR ASSEMBLY SEC Lay an Outer Floor Panel (AGR) fl at on the ground. Hold a Center Floor Panel (AFX) at an angle as shown and fi t the 2.1 tabs into the slots. Lay the Center Floor Panel fl at. AFX AGR CAUTION Sharp objects may damage your fl oor. If resting sharp, heavy objects on your shed fl oor, place a block of wood between the sharp object and fl oor. SEC Hold the second Outer Floor Panel (AGR) at an angle as s
