ページ1に含まれる内容の要旨
Fully Automatic Washing Machine User's manual
This manual is for
HWMP50F
Please read this manual
carefully before using.
Retain it for future
reference.
ページ2に含まれる内容の要旨
CONTENTS CONTENTS the 2nd cover Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 5 Preparation before washing 6 Put in the laundries 7 Usage of the detergent 7 Close the top lid 7 Use the operation buttons 8 Finish washing 10 Disposal after washing 11 Trouble-shooting Answer to question 12 Packing list 13 Specification table The back cover
ページ3に含まれる内容の要旨
Names of the parts Cold water valve Water absorption Hot water valve Top lid component cushion Detergent box Power cord Handle Control pannel Lint filter Balance ring Inner tub Pulsater Front control board Cabinet Fixed leg Drain bushing (3 pieces) Adjustable Drain Adjustable leg leg film Back cover protective lid Meaning and description of the symbols Contents marked with that symbol are related to the Warning sign safety of the product and the personal safety of the users. Please operate in s
ページ4に含まれる内容の要旨
Safety precautions The washing machine must be positioned Please plug the power plug on special so that the plug is accessible. Be sure to pull receptacle. Be sure to use three-pins the plug off and close the water faucet in power receptacle. Ensure that the earthing following cases: power failure, delivering prong of the power receptacle is earthed the machine, setting the machine idle or reliably. Use leakage protector if possible. cleaning the machine. Do not plug or pull the power plug with
ページ5に含まれる内容の要旨
Safety precautions Do not put hand into the rotating tub. Do not decompose, repair or alter It is dangerous even if the rotation the machine by yourself. speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on it. The appliance is not instruct for use of young children of infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. Do not put any hot or heavy items Do
ページ6に含まれる内容の要旨
Installation and adjustment Please install and adjust the machine according to the requirement of the mannual. It is very important to your security and correct operating the machine. Install the lint filter After opening the package, please take out the lint filter from the document bag, install it to the inner tub. See to the figure. Inner tub Lint filter Install the bottom plate After you open the package, please lean Back the washing machine gently down on Soft object ( like the towel c
ページ7に含まれる内容の要旨
Install the water inlet hose Install the water inlet hose Use the new hose and the old hose should not be reused. 1. Insert a new flat washer into each end of the inlet hoses. Firmly put the washers in the coupling. Note: Use the new hose sets supplied with the washer. Any other old hose sets should not be used. You may have to use pliers to tighten the coupling. Do not over tighten because you may cause damage to the valve. 2. Connect the water inlet hoses to the water faucet. 3. Connec
ページ8に含まれる内容の要旨
1.Preparation before washing Preparation before washing 1.Connect the water inlet hose 2.Confirm that the washing machine is earthed reliably.Then insert the power plug into the receptacle.Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Do not put down the drain hose. 4.Slanting or uneven ground may result 0.8m H 1.2m in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before washing the laundries When the pulsato
ページ9に含まれる内容の要旨
2.Put in the laundries The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put inreasonable amount of laundries and the laundries can be turned round in washing for one time washing. Do not select more than "L" wat
ページ10に含まれる内容の要旨
5 Use the operation buttons a Description of operation button Process,remain time digitron "POWER ON/OFF" button Push the " POWER ON/OFF" button to It displays "--" during detecting. switch on the power. It displays total remained time Under power-on mode, push it to switch (min). If the total time exceeds 99 off the power. Push the " POWER ON/OFF" button to minutes, it uses "A" on tens digit switch on the power. If the " POWER to represent100 minutes, and uses ON/OFF" button is not pus
ページ11に含まれる内容の要旨
12 b Steps of using the operation buttons and description of the steps HWMP50F WASH CYCLE TEMP SELECT FUZZY POWER ON/OFF NORMAL WARM SOAK TIME HEAVY HOT WASH REMAINING START QUICK WASH COLD RINSE PAUSE SPIN ONLY SPIN WASH WATER CYCLE LEVEL 1.Push "POWER ON/OFF"button to switch on the power POWER ON/OFF 2.Push " WASH CYCLE " button to select suitable automatic program WASH CYCLE After the power is switched on, " NORMAL " is automatically set. To select other fully-auto program, please pu
ページ12に含まれる内容の要旨
When "NORMAL" program is selected, the washing machine will perform fully-automatically controlled fuzzy program to set water level, water flow and wash duration according to the cloth nature and weight. 3 Push the " WATER LEVEL "button,select suitable water level WATER LEVEL After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically. To select other water level, first push the " START
ページ13に含まれる内容の要旨
7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during Clean the detergent box and set it on washing. the control panel seat. It must be cleaned in time after each using. Lint filter: 1.Pull it up to dismantle. 2.Push it down to install. 3.Clean the filter screen after washi
ページ14に含まれる内容の要旨
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomenan The reason How to settle The top lid is opened The digitron displa
ページ15に含まれる内容の要旨
Common phenomena Phenomena Explanation The spinning is intermittent Balance the laundries to avoid slanting. when it starts. The wash procedure pauses. The cloth sensor is detecting , it will add water after about 48 senconds. The program is setting the drain time , Select spin program, but it does certain period is needed before it starts not work. spinning. There may be some water It is the water remained performance flowing out of the drain hose in inspection by the factory. the first use of
ページ16に含まれる内容の要旨
Specification table Fully Automatic Washing Machine Type HWMP50F Model 220-240V 50Hz Rated voltage/frequency 380W Rated washing power Rated spinning power 300W Weight About 35kg Dimensions (mm) L 520 W 530 H 890 0.03Mpa-1.0MPa (when water temperature is Water inlet pressure 70 ~90 , the water inlet pressure of hot water shall not exceed 0.4MPa)
