ページ1に含まれる内容の要旨
WALL SWITCH WIRING MAINTENANCE
INSTRUCTION MANUAL
1. Unscrew the speed control cover and screw Periodic cleaning of your ceiling fan is the only Models: 9848, 9856 & 9860
base onto wall. maintenance that is needed. When cleaning, use only
a soft brush or lint free cloth to avoid scratching the
2. Connect the switch white wire to the black
finish. Abrasive cleaning agents are not required and
(Hot) supply wire using a listed wire nut.
should be avoided to prevent damage to the finish.
Connect the
ページ2に含まれる内容の要旨
4. Slide lower canopy down the pipe until it covers INSTALLATION INSTRUCTIONS Black Supply Supply Ground White Supply the wiring. Tighten screw to hold in place. (Hot) Green or Bare (Neutral) 1. Attach the hanger bracket to the electrical box 5. Slide upper canopy on over the pipe and allow it to temporarily rest on top of lower canopy. capable of reliably supporting at least 50 pounds. Insert the screws through the slotted holes in the 6. Insert motor leads bracket and attach to the electrical