ページ1に含まれる内容の要旨
BASS AMPLIFIER
User’s Guide
ページ2に含まれる内容の要旨
BASS AMPLIFIER Table Of Contents: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 The Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5 Some Suggested Settings: . . . . . . . . . . . . . . . . . . . . .6 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . .7 Technical Specifications . . . . . . . . . . . . . . . .back cover CAUTION PRECAUCION ATTENTION RISK OF ELECTRIC SHOCK RIESGO DE CORRIENTAZO RISQUE D'ELECTROCUTION NE PAS OU
ページ3に含まれる内容の要旨
BASS AMPLIFIER Congratulations! You are now the proud owner of the compact but powerful Crate BX25DLX/BX50DLX Bass Amplifier. The BX25DLX/BX50DLX features two different channels: a distortion channel, featuring Crate’s exclusive Shape control for quick and easy access to the tone you need, and a clean channel with a four-band rotary EQ. Another unique and valuable feature of this amplifier is the Octave control. This feature electronically creates a second signal that is one octave lower than th
ページ4に含まれる内容の要旨
BASS AMPLIFIER The Front Panel: 1. INPUT: Use this 1/4” jack to connect your bass to the amplifier by means of a shielded instrument cable. 2. GAIN: Use this control to adjust the amount of distortion for the Distortion/A channel. As you rotate the con- trol clockwise the amount of distortion increases. 3. SHAPE: Use this control to adjust the tone of the Distortion/A channel, from a studio “V”-shaped tone to a more “live,” more present sound. 4. LEVEL: Use this control to adjust the output leve
ページ5に含まれる内容の要旨
BASS AMPLIFIER 13. CD INPUT: Use these RCA jacks to connect the line level (or headphones) output of a CD player, tape deck or rhythm machine to the amplifier. The signal level from these jacks is adjusted by the Master control (#12). If the signal from the source connected to these jacks is too strong, use the output level control on the source to adjust the signal to obtain the proper level for a good mix. 14. HEADPHONES: Use this jack to listen to the amplifier through a pair of stereo headph
ページ6に含まれる内容の要旨
BASS AMPLIFIER Suggested Starting Settings: Rock: OUT * * Jazz: OUT * * Country: OUT * * Funk: OUT * * Solo Fuzz: IN * * Super Fat Fuzz: IN * 6 *As Needed
ページ7に含まれる内容の要旨
BASS AMPLIFIER System Block Diagram: OCTAVE LEVEL TUNER FOOT A BC D EF G SWITCH BUFFER EQ INPUT CHANNEL LEVEL LOW LOW HIGH HIGH SWITCH MID MID NOISE GATE SHAPE DISTORTION LEVEL GAIN CD INPUTS L R SPEAKER POWER MASTER AMP EXTERNAL SPEAKER HEAD PHONES 7
ページ8に含まれる内容の要旨
BASS AMPLIFIER BX25DLX/BX50DLX TECHNICAL SPECIFICATIONS: BX25DLX BX50DLX Output Power Rating 27W RMS 1%THD 4Ω , 120 VAC 50W RMS 1.5%THD 4Ω 120 VAC Gain Channel A 115dB 115dB Channel B 76dB 76dB CDInputs 36dB 36dB Tone Range Low 20dB @ 50Hz 20dB @ 50Hz Low Mid 24dB @ 150Hz 24dB @ 150Hz High Mid 20dB @ 1kHz 20dB @ 1kHz High 34dB @ 10kHz 34dB @ 10kHz Signal to Noise Ratio 75dB 75dB Input Impedance 220k ohms 220k ohm Maximum Signal Accepted 7 volts, peak-to-peak 7 volts, peak-to-peak Power Requirem
