ページ1に含まれる内容の要旨
HUNTING SHELTER
Model 96529
ASSEMbLy INSTRUcTIoNS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
Distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
© ®
Copyright 2007 by H
ページ2に含まれる内容の要旨
SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. IMpoRTANT SAFETy INSTRUcTIoNS In this manual, on the labeling, and all other information provided with this product: This is
ページ3に含まれる内容の要旨
GENERAL SAFETy RULES 1. Dress Properly. Do not wear loose clothing or jewelry. They can be caught in moving parts. 2. Wear ANSi-approved safety goggles when assembling this product. 3. Only use on a sturdy tree capable of supporting the weight of the Shelter. 4. Fire hazard! This product IS NOT flame retardant. Do not smoke near or introduce flames near this product. 5. This product cannot support the weight of people or any objects. Do not sit or s
ページ4に含まれる内容の要旨
SpEcIFIcATIoNS Formed steel tubing / Camouflage polyester with dark olive Material green draw strings and hook and loop closures. Main Tube Dimensions 5/8” O.D. x 58-11/16” Long Recommended Tree 9-4/5” to 15-11/16” Trunk Diameter Rear Tree Support 18-1/2” Wide x 6” L x 3/16” Thick Bar Dimensions Cross Tube 5/8” O.D. x 24” Long Dimensions Arm Tube Dimensions 5/8” O.D. x 22-1/2” Long Side Tube Dimensions 5/8” O.D. x 14-1/8” Wide x 48-1/2” Long 60” Long x 48” Wide x 81-1/2” High Overall Dimensi
ページ5に含まれる内容の要旨
5. Use the remaining Draw Strings to secure the rest of the Fabric Cover (1) to the Main Support Frame (3) and Side Frames (2). (See Assy. Diagram.) 6. Remove the Bolt (11), Flat Washer (7), and Wing Nut (10) from one end of the Rear Cross Bar (12). (See Figure A and Assy. Diagram.) 7. With assistance, position the Hunting Shelter against the trunk of a tree. Adjust the Rear Cross Bar (12) to fit firmly against the tree trunk. Then secure the Hunt- ing Shelter to the tree trunk by re-ins
ページ6に含まれる内容の要旨
MAINTENANcE AND SERVIcING Damaged equipment can fail, causing serious personal WARNING injury. Do not use damaged equipment. If a problem occurs, have the problem corrected before further use. Inspection, maintenance, and cleaning 1. bEFoRE EAcH USE, inspect the general condition of the Hunting Shelter. Check for loose screws, misalignment or binding of parts, cracked or broken parts, damaged fabric, and any other condition that may affect its safe operation. 2. REGULARLy, clear off any d
ページ7に含まれる内容の要旨
pARTS LIST part Description Q’ty part Description Q’ty 1 Fabric Cover 1 11 Bolt (M8x35) 2 2 Side Frame 2 12 Rear Cross Bar 1 3 Main Support Frame 1 13 Support Frame 2 4 Hinging Brace 2 14 Bolt (M5x25) 4 5 Support Brace 1 15 Flat Washer (#5) 10 6 Bolt (M8x40) 2 16 Lock Nut (M5) 10 7 Flat Washer (#8) 4 17 Hooks 8 8 Lock Nut (M8) 2 18 Side Cover 1 9 Bolt (M5x40) 6 19 U-Shaped Landscape Staple 8 10 Wing Nut (M8) 2 SKU 96529 For technical questions, please call 1-800-444-3353. Page 7
ページ8に含まれる内容の要旨
ASSEMbLy DIAGRAM ReV 08e SKU 96529 For technical questions, please call 1-800-444-3353. Page 8 HUNTING SHELTER 12 11 13 7 1 10 2 14 15 16 3 6 7 8 5 4 15 9 16 17 18 19
