Agilent Technologies 2の取扱説明書

デバイスAgilent Technologies 2の取扱説明書

デバイス: Agilent Technologies 2
カテゴリ: クロックラジオ
メーカー: Agilent Technologies
サイズ: 2.06 MB
追加した日付: 4/16/2014
ページ数: 60
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスAgilent Technologies 2の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Agilent Technologies 2に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Agilent Technologies 2をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Agilent Technologies 2のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Agilent Technologies 2の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Agilent Technologies 2 取扱説明書 - Online PDF
Advertisement
« Page 1 of 60 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Agilent Technologies 2を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Agilent Technologies 2の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

Agilent 83491/2/3A
Clock Recovery Modules
User’s Guide

ページ2に含まれる内容の要旨

© Copyright 2000 material and workmanship for gies shall not be liable for any The OFF symbols ❍ Agilent Technologies a period of one year from date direct, indirect, special, inci- are used to mark the All Rights Reserved. Repro- of shipment. During the war- dental, or consequential dam- positions of the instru- duction, adaptation, or trans- ranty period, Agilent Technol- ages, whether based on ment power line lation without prior written ogies will, at its option, either contract, tort,

ページ3に含まれる内容の要旨

General Safety Considerations General Safety Considerations This product has been designed and tested in accordance with IEC Publica- tion 61010-1, Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, and has been supplied in a safe condition. The instruction documentation contains information and warnings that must be followed by the user to ensure safe operation and to maintain the product in a safe condition. WARNING Light energy can radiate from the f

ページ4に含まれる内容の要旨

General Safety Considerations Technologies part number 2110-0449.  For 220/240V operation, use an IEC 127 5×20 mm, 0.16 A, 250 V, Agilent Technologies part number 2110-0448. CAUTION Before switching on this instrument, make sure that the line voltage selector switch is set to the line voltage of the power supply and the correct fuse is installed. Assure the supply voltage is in the specified range. CAUTION This product is designed for use in Installation Category II and Pollution Degree 2

ページ5に含まれる内容の要旨

Contents General Safety Considerations iii 1 Installation Installation 1-2 2Operation Agilent 83491/2/3A Modules—At a Glance 2-2 Front-Panel Features 2-4 Block Diagrams 2-7 To Display a Signal 2-8 To Compensate for Module Insertion Loss 2-9 Using Probes with an Agilent 83491A 2-10 3 Specifications and Regulatory Information Agilent 83491A Specifications 3-3 Agilent 83492A Specifications 3-4 Agilent 83493A Specifications 3-6 Agilent 83491/2/3A Operating Specifications 3-7 Declaration of Conformit

ページ6に含まれる内容の要旨

ページ7に含まれる内容の要旨

1 To install the module 1-3 To connect cables to an Agilent 83492A 1-7 Installation

ページ8に含まれる内容の要旨

Installation Installation Installation Agilent 83491/2/3A modules require that firmware revision A.06.25 or later be installed in the Agilent 83480A. If you wish to install the module in an Agilent 54750A digitizing oscilloscope, you must first install the Agilent 83480K communications firmware upgrade kit. To check the Agilent 83480A’s firmware revision code 1 Press the Utility key and then the System config softkey. 2 The firmware revision number is listed under the Frame section of the dis

ページ9に含まれる内容の要旨

Installation Installation To install the module 1 Verify that all system components ordered have arrived by comparing the shipping forms to the original purchase order. Inspect all shipping containers. The shipment includes: ❒ An Agilent 83491/2/3A Clock Recovery Module ❒ Fiber-optic adapter cable (Agilent 83492/3A module only) ❒ Two RF adapter cables (Agilent 83491A module only) ❒ Agilent 83491/2/3A User’s Guide (this book) If your shipment is damaged or incomplete, save the packing materials

ページ10に含まれる内容の要旨

Installation Installation Figure 1-2. Position of modules in the mainframe 3 Clean all optical interfaces as described in “Cleaning Connections for Accurate Measurements” on page 4-10, before making measurements. 4 Perform the following steps if you’re installing an Agilent 83492/3A module: a Unscrew and remove the fiber-optic adapter that is located on the optical module’s front-panel optical input connector. b Connect the adapter that was removed in the previous step onto the Agilent 83492/

ページ11に含まれる内容の要旨

Installation Installation Figure 1-3. The adapter cable CAUTION Agilent 83491A Modules: Maximum safe signal input level is ±5V. The input circuits can also be damaged by electrostatic discharge (ESD). Before connecting any coaxial cable to the connectors, momentarily short the center and outer conductors of the cable together. Avoid touching the front-panel input connectors without first touching the frame of the instrument. Be sure that the instrument is properly earth-grounded to prevent

ページ12に含まれる内容の要旨

Installation Installation Figure 1-4. Front-panel lights 9 Confirm that the Unlocked light is off. 10 Observe the Clock and Data outputs on an oscilloscope. Waveforms should be present. The instrument is now ready for you to begin making measurements. 1-6

ページ13に含まれる内容の要旨

Installation Installation To connect cables to an Agilent 83492A On Agilent 83492A modules, the front-panel fiber-optic connectors reverse input and output roles depending on the wavelength of the signal. Signals in the 750 nm to 860 nm wavelength range are input to the left connector and output from the right connector. Signals in the 1000 nm to 1600 nm wave- length range are input to the right connector and output from the left connec- tor. Figure 1-5. Input and output connections versus w

ページ14に含まれる内容の要旨

ページ15に含まれる内容の要旨

2 Agilent 83491/2/3A Modules—At a Glance 2-2 Front-Panel Features 2-4 Block Diagrams 2-7 To Display a Signal 2-8 To Compensate for Module Insertion Loss 2-9 Using Probes with an Agilent 83491A 2-10 To compensate for a passive probe 2-11 To compensate an Agilent 54701A active probe 2-11 To compensate for other devices 2-12 Operation

ページ16に含まれる内容の要旨

Operation Agilent 83491/2/3A Modules—At a Glance Agilent 83491/2/3A Modules—At a Glance The Agilent 83491/2/3A are designed to operate in an Agilent 83480A digital communications analyzer. These modules recover clock and data information at standard telecom and datacom rates. The resulting trigger signal is made available to the Agilent 83480A mainframe via a connector located on the module’s rear-panel. An external front-panel cable passes the data signal, with some insertion loss, to the

ページ17に含まれる内容の要旨

Operation Agilent 83491/2/3A Modules—At a Glance WARNING Light energy can radiate from the front panel OUTPUT connectors on Agilent 83492A and 83493A modules. The light emitted from these connectors is the slightly attenuated light that is input to the front- panel INPUT connector. Use with Agilent 71603B or 71612B Error Performance Analyzers The front-panel Data and Clock outputs provide electrical recovered clock and regenerated data signals for simultaneous testing with other instruments,

ページ18に含まれる内容の要旨

Operation Front-Panel Features Front-Panel Features Figure 2-2. Agilent 83491/2/3A front panels SELECT key Pressing this key changes the modulation rate of the input signal. The recov- ered and retimed clock trigger is sent to the mainframe. The Trigger On Data selection is a bypass mode where the data stream directly triggers the main- frame. Refer to “Block Diagrams” on page 2-7 to view a schematic of the nor- mal and bypass paths. 2-4

ページ19に含まれる内容の要旨

Operation Front-Panel Features Green and red data-rate lights The data-rate indicator lights change color between red and green to show which data rate is selected. A red light does not indicate a problem. A red light shows that the adja- cent red data rate label is selected. A green light shows that the adjacent green data rate label is selected. Repeatedly pressing the SELECT key cycles through the selections in one color before switching to the opposite color. On Agilent 83491A modules for

ページ20に含まれる内容の要旨

Operation Front-Panel Features Multimode and single-mode connections Agilent 83492A modules use multimode fiber. Connecting the output to the Optical INPUT connector on Agilent 83481/2/5 single-mode modules results in large reflections and insertion loss. Agilent 83493A modules use 9/125 µ m single-mode fiber. Connecting multimode fiber to the Optical Input connector results in large reflections and insertion loss. Recovered Clock The recovered clock signal is routed directly to the Agilent 8


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Agilent Technologies 83446A 取扱説明書 クロックラジオ 3
2 Agilent Technologies 3A 取扱説明書 クロックラジオ 0
3 Agilent Technologies B 取扱説明書 クロックラジオ 0
4 Agilent Technologies 83491 取扱説明書 クロックラジオ 0
5 Sony DREAM MACHINE 4-115-539-45(1) 取扱説明書 クロックラジオ 6
6 Sony Dream Machine ICF-C233L 取扱説明書 クロックラジオ 135
7 Sony Dream Machine ICF-C273L 取扱説明書 クロックラジオ 660
8 Sony ICF-C211L 取扱説明書 クロックラジオ 30
9 Sony ICF-CD553RM 取扱説明書 クロックラジオ 8
10 Sony DREAM MACHINE 3-288-976-11(1) 取扱説明書 クロックラジオ 380
11 Sony ICF-C25 取扱説明書 クロックラジオ 193
12 Sony DREAM MACHINE 4-154-584-35(1) 取扱説明書 クロックラジオ 125
13 Sony CFD-S170L 取扱説明書 クロックラジオ 208
14 Sony CFD-E95 取扱説明書 クロックラジオ 19
15 Sony CFD-E75L 取扱説明書 クロックラジオ 70