ページ1に含まれる内容の要旨
MODEL JCR-255
AM/FM DUAL ALARM AUTO TIME SET CLOCK RADIO
INSTRUCTION MANUAL
Please read and follow this instruction manual carefully
before using the unit and retain it for future reference
ページ2に含まれる内容の要旨
DEAR JENSEN ® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most i
ページ3に含まれる内容の要旨
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1. Read these instructions 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Ventilation – Slots and openings in th
ページ4に含まれる内容の要旨
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid
ページ5に含まれる内容の要旨
IMPORTANT NOTES Avoid installing the unit in locations described below: Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. Dusty places. Places subject to constant vibration. Humid or moist places. COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
ページ6に含まれる内容の要旨
POWER SOURCE This unit is designed to operate on 120V/60Hz AC house current. Operating this unit from any other power source may cause damage to the unit, and such damage is not covered by your warranty. The radio is also pre-loaded with 2 x “AA” batteries for the battery back-up and for the Auto Time Set clock system. BATTERY BACK – UP SYSTEM The Battery Back-up System ensures the clock and alarm settings will be retained during a power interruption or power outage (in order to preserve the b
ページ7に含まれる内容の要旨
2 4 3 5 6 9 13 1 7 8 12 14 10 11 15 1. POWER ON/OFF BUTTON 9. TUNNING CONTROL 2. VOLUME CONTROL 10. TIME ZONE SELECTOR 3. CLOCK SETTING UP BUTTON 11. DAYLIGHT SAVING TIME SWITCH 4. CLOCK SETTING DOWN BUTTON 12. DIMMER CONTROL 5. ALARM1 BUTTON 13. AUX IN JACK 14. AUX/RADIO SELECTOR 6. ALARM2 BUTTON 15. BATTERY COMPARMENT 7. SNOOZE BUTTON 8. (AM/FM)BAND / CLOCK SET BUTTON 6
ページ8に含まれる内容の要旨
1 3 4 2 5 6 1. ALARM 1 INDICATOR 4. AM CLOCK INDICATOR 2. ALARM 2 INDICATOR 5. PM CLOCK INDICATIOR 3. MULTI FUNCTION DISPLAY 6. SPEAKER 7
ページ9に含まれる内容の要旨
AUTO TIME SET This unit features an Automatic Time Set system powered by 2 X “AA” batteries (3V DC) (Included), so you do not need to set the clock time when first plugged in. After the unit is plugged in, the LED display will show the current time automatically after you set the time zone and daylight saving time for desired area. SETTING THE TIME ZONE Change to your time zone area by sliding the TIME ZONE switch on the back of the unit to the appropriate time zone you live in. The default time
ページ10に含まれる内容の要旨
SETTING THE CLOCK In case the back-up batteries are accidentally removed. You will need to set the clock manually. If the LED display is blinking 1. In standby mode, press the UP button to increase or press the DOWN button to decrease the minutes setting. 2. Press and hold the UP / DOWN button to fast forward/backward the clock setting. 3. Press the BAND/SET button or waiting 5 seconds to confirm the setting. If the LED display is steady 1. In standby mode, pres
ページ11に含まれる内容の要旨
6. When you have finished listening, press the ON/OFF button once to turn off the unit. TIPS FOR BEST RADIO RECEPTION AM - The AM antenna is built inside the radio. If AM reception is weak, change the position of the unit until the internal antenna picks up the strongest signal. FM - If FM reception is weak, fully extend the wire antenna and vary the position and location of the antenna until you find the strongest signal. ALARM OPERATION SETTING THE WAKE UP
ページ12に含まれる内容の要旨
5. To stop the alarm immediately, press the ON/OFF button once. The radio will stop but the alarm remains set and will turn the unit on again at the same time on the following day. 6. To turn off the alarm completely, press the ALARM button repeatedly until ALARM indicator turns off. WAKE TO BUZZER 1. To select wake to buzzer mode, press the ALARM button repeatedly until the display shows “bUZ”. 2. Release ALARM button and wait about 5 seconds to
ページ13に含まれる内容の要旨
BACKLIGHT BRIGHTNESS OPERATION You can change the LED brightness by switching the HI / LO dimmer switch located on the side of the cabinet. AUXILIARY INPUT This unit features an AUX line-in jack for connecting your iPod, MP3 player or other digital music players. 1. Connect the headphone jack of your external device to the AUX IN jack located on the back of the unit (cable not included). 2. Turn on the unit and set the FUNCTION Selector to the “AUX IN” position. 3. Start playing your iPo
ページ14に含まれる内容の要旨
SPECIFICATIONS Power Requirement: AC 120V~60HZ 6W Battery Backup For Clock: 2 X”AA” (UM-3) Frequency Range: AM 530-1710kHz, FM 88-108MHz SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service. When returning the unit, please remove the battery to prevent damage to the unit in transit and/or from possible battery leakage. We are not responsible for battery returned with the product or for the cost of replacement. Distributed by: S
