Makita LSSOODWAの取扱説明書

デバイスMakita LSSOODWAの取扱説明書

デバイス: Makita LSSOODWA
カテゴリ: コードレスのこぎり
メーカー: Makita
サイズ: 1.9 MB
追加した日付: 6/25/2014
ページ数: 33
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスMakita LSSOODWAの取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Makita LSSOODWAに関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Makita LSSOODWAをこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Makita LSSOODWAのフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Makita LSSOODWAの説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Makita LSSOODWA 取扱説明書 - Online PDF
Advertisement
« Page 1 of 33 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Makita LSSOODWAを全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Makita LSSOODWAの内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

Cordless Compound Miter Saw
Equipped with Electric Brake
216 mm (8-1/2”) MODEL LSSOODZ
216 mm (8-112”) MODEL LSSOODWA / MODEL LSSOODWAE
With High Capacity Battery Charger
216 mm (S-ll2”) MODEL LSSOODWB / MODEL LSSOODWBE
With High Capacity Battery Charger
INSTRUCTION MANUAL

ページ2に含まれる内容の要旨

SPECIFICATIONS Model LS800D Blade diameter ....................................................................................... 2 16 mm (8- 112") Hole (arbor) diameter .............................................................................. 15.88 mm (5/8") Max. cutting capacities (H x W) with blade 216 mm (8-1/2") in diameter Bevel angle I I Miter anole ., 00 45O (left) 61 mm x 122 mm 45 mm x 122 mm 00 (2-3/8" x 4-1 3/16") (1-3/4" x 4-13/16") ~ ~~ 450 61 mm x 85 mm 45 mm

ページ3に含まれる内容の要旨

For Your Own Safety Read Instruction Manual Before Operating Compound Miter Saw Save it for future reference GENERAL SAFETY PRECAUTIONS (For All Tools) 1. KNOW YOUR POWER TOOL. Read the owner's manual carefully. Learn the tool's applications and limitations, as well as the specific potential hazards peculiar to it. 2. KEEP GUARDS IN PLACE and in working order. 3. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool be

ページ4に含まれる内容の要旨

16. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off position before inserting battery. 17. USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommended accessories. The use of improper accessories may cause risk of injury to persons. 18. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted. 19. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should

ページ5に含まれる内容の要旨

ADDITIONAL SAFETY RULES 1. Wear eye protection. 2. Do not operate saw without guards in place. 3. Don’t use the tool in the presence of flammable liquids or gases. 4. Check the blade carefully for cracks or damage before operation. Replace cracked or damaged blade immediately. 5. Use only flanges specified for this tool. 6. Be careful not to damage the arbor, flanges (especially the installing surface) or bolt. Damage to these parts could result in blade breakage. 7. Make sure that the

ページ6に含まれる内容の要旨

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE 1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1 1 battery charger, (21 battery, and (3) product using battery. 3. CAUTION - To reduce risk of injury, charge only MAKITA Battery Cartridge 7000, 7001, 7002, 7033, 7100, 7120, 9000, 9001, 9002, 9033, 9100, 9101,9102,9120,9122,9133

ページ7に含まれる内容の要旨

ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OoF1 or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power receptacle. 3. Do not allow anything to cover or clog the charger vents. 4. Always cover the battery terminals with the battery cover when the battery cartridge is not used. 5. A battery short can cause a large current flow, overheating, possible burns and e

ページ8に含まれる内容の要旨

Installing or removing battery cartridge *Always switch off the tool before inser- tion or removal of the battery cartridge. *To remove the battery cartridge, with- draw it from the tool while pressing the buttons on both sides of the cartridge. *To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out o

ページ9に含まれる内容の要旨

When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it completely and recharging a couple of times. If you charge a battery cartridge from a just-operated tool or a battery cartridge which has been left in a location exposed to direct sunlight or heat for a long time, the char

ページ10に含まれる内容の要旨

I Socket wrench The socket wrench is stored as shown in the figure. When using the socket wrench, pull it out of the wrench holder. After using the socket wrench, return it to the wrench holder. I I Bench mounting saw When the tool is shipped, the handle is locked in the lowered position by the stop- per pin. Release the stopper pin by lower- ing the handle slightly and pulling the stop- per pin. This tool should be bolted with two bolts to a level and stable surface using the bol

ページ11に含まれる内容の要旨

Installing or removing saw blade CAUTION: *Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the blade. *Use only the Makita socket wrench provided to install or remove the blade. Failure to do so may result in overtightening or insufficient tightening of the hex bolt. This could cause serious injury to operator or others in the general vicinity of the tool. Lock the handle in the raised position by pushing in the stopper pin.

ページ12に含まれる内容の要旨

To install the blade, mount it carefully onto the spindle, making sure that the direction of the arrow on the surface of the blade matches the direction of the arrow on the blade case. Install the outer flange and hex bolt, and then use the socket wrench to tighten the hex bolt (left-handed) securely counterclockwise while pressing the shaft lock. - Blade case Return the safety cover and center cover to its original position. Then tighten the hex bolt clockwise to secure the center cover.

ページ13に含まれる内容の要旨

Dust bag The use of the dust bag makes cutting 7 Dust nozzle operations clean and dust collection easy. To attach the dust bag, fit the bag's entry port over the dust nozzle. When the dust bag is about half full, remove the dust bag from the tool and pull the fastener out. Empty the dust bag of its contents, tapping it lightly so as to remove particles adhering to the insides which might hamper further collection. NOTE: If you connect a Makita vacuum cleaner to your saw, more effici

ページ14に含まれる内容の要旨

Kerf board Left bevel cut Straight cut CAUTION: After changing the bevel angle, always readjust the kerf boards as described above. Maintaining maximum cutting capacity This tool is factory adjusted to provide the max. cutting capacity for a 216 mm (8-1/2") saw blade. When using a saw blade other than 216 mm (8-1/2") saw blade, adjust the lower limit position of the blade as follows: First, remove the battery cartridge. Push the carriage toward the guide fence fully and lower the handle

ページ15に含まれる内容の要旨

Positioning for adjusting the miter angle I Miter scale Lock lever The turn base turns up to 52" to the left and 52" to the right. Loosen the grip by turning counterclockwise. Turn the turn base while pressing down the lock lever. When you have moved the grip to the posi- tion where the pointer points to the desired angle on the miter scale, securely tighten the grip clockwise. CAUTION: *When turning the turn base, be sure to raise the handle fully *After changing the miter angle, al

ページ16に含まれる内容の要旨

1. Vertical vise The vertical vise can be installed in two positions on either the left or right side of the guide fence, or the holder assem- bly (optional accessory). Insert the vise rod into the hole in the guide fence or the holder assembly and tighten the screw to secure the vise rod. (Note: When using the holder assembly, install it on the holder as shown in the figure.) Position the vise arm according to the thickness and shape of the workpiece Turn base and secure the vise

ページ17に含まれる内容の要旨

3. Holders and holder assembly (optional accessories) The holders and the holder assembly can be installed on either side as a con- venient means of supporting workpieces horizontally. Install them as shown in the figures below. Then tighten the screws firmly to secure the holders and the holder assembly. Hoider Holder assembly When cutting long workpieces, use the holder-rod assembly (optional accesso- Holder assembly ry). It consists of two holder assemblies I and two rods 12.

ページ18に含まれる内容の要旨

To prevent the switch trigger from being accidentally pulled, a lock-off button is pro- Loc k-of f but ton vided. To start the tool, press in the lock-off button and pull the switch trigger. Release the switch trigger to stop. I Operation CAUTION: *Before use, be sure to release the handle from the lowered position by pulling the stop- per pin. *Make sure the blade is not contacting the workpiece, etc. before the switch is turned on. *Do not apply excessive pressure on the handle whe

ページ19に含まれる内容の要旨

2. Miter cutting Refer to the previously covered "Positioning for adjusting the miter angle". 3. Bevel cutting *At a left 45" bevel angle, workpieces 45 mm (1-3/4") high and 122 mm (4-13/16") wide can be cut. *Loosen the lever and tilt the saw blade to set the bevel angle. Refer to the previously covered "Positioning for adjusting the bevel angle". Be sure to re-tighten the lever firmly to secure the selected bevel angle safely. Secure the workpiece Apply pressure in parallel with blade

ページ20に含まれる内容の要旨

5. Cutting crown and cover moldings *Crown and cove moldings can be cut on a compound miter saw with the moldings laid flat on the turn base. *There are two common types of crown moldings and one type of cove moldings; 52/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle cove molding. See illustrations below. Ceiling Ceiling Ceiling 45" type 52/38' type 45" type crown molding cove molding crown molding *There are crown and cove molding joints which are made


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Makita 4300DW 取扱説明書 コードレスのこぎり 0
2 Makita 2106K 取扱説明書 コードレスのこぎり 0
3 Makita 4191D 取扱説明書 コードレスのこぎり 7
4 Makita 4334D 取扱説明書 コードレスのこぎり 12
5 Makita 4334DWD 取扱説明書 コードレスのこぎり 0
6 Makita 4300D 取扱説明書 コードレスのこぎり 2
7 Makita 4307D 取扱説明書 コードレスのこぎり 1
8 Makita 4350CT 取扱説明書 コードレスのこぎり 38
9 Makita 4334 取扱説明書 コードレスのこぎり 0
10 Makita 433ODWA 取扱説明書 コードレスのこぎり 0
11 Makita 4350T 取扱説明書 コードレスのこぎり 4
12 Makita 4351CT 取扱説明書 コードレスのこぎり 9
13 Makita 4350FCT 取扱説明書 コードレスのこぎり 109
14 Makita 4307DW 取扱説明書 コードレスのこぎり 0
15 Makita 4390D 取扱説明書 コードレスのこぎり 7
16 ATD Tools ATD-10535 取扱説明書 コードレスのこぎり 0
17 ATD Tools ATD-10536 取扱説明書 コードレスのこぎり 0
18 Bahco Sandflex 3840 取扱説明書 コードレスのこぎり 1
19 Beko AUTOMATIC WASHING MACHINE WM 7335 W 取扱説明書 コードレスのこぎり 53
20 Black & Decker BDCS1800 取扱説明書 コードレスのこぎり 8