McCulloch Electramac ESV1414の取扱説明書

デバイスMcCulloch Electramac ESV1414の取扱説明書

デバイス: McCulloch Electramac ESV1414
カテゴリ: チェーンソー
メーカー: McCulloch
サイズ: 1.18 MB
追加した日付: 4/29/2013
ページ数: 15
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスMcCulloch Electramac ESV1414の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、McCulloch Electramac ESV1414に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書McCulloch Electramac ESV1414をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書McCulloch Electramac ESV1414のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - McCulloch Electramac ESV1414の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
McCulloch Electramac ESV1414 取扱説明書 - Online PDF
Advertisement
« Page 1 of 15 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書McCulloch Electramac ESV1414を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書McCulloch Electramac ESV1414の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

Husqvarna Outdoor Products Italia SpA
Via Como 72
23868 Valmadrera (Lecco)
ITALIA
Phone + 39 0341 203111 - Fax +39 0341 581671
PN. 249498 REV. 05 (01/06)

ページ2に含まれる内容の要旨

ページ3に含まれる内容の要旨

ページ4に含まれる内容の要旨

A. GENERAL DESCRIPTION 1) Rear handle 17) Cutting depth gauge 2) Rear hand guard 18) Cutting tooth 3) Front handle 19) Bar 4) Front hand guard/chain brake lever 20) Chain cover 5) Chain tensioner knob/screw 21) Pinion 6) Chain tensioner pin 22) Chain catcher 7) Oil tank cap 23) Bar retaining screws 8) Oil tank inspection gauge 24) Bar retaining knob / nuts 9) Air vents 25) Nose sprocket 10) Cable 26) Guide bar cover guard 11) Manual 27) Spiked bumper 12) Switch 28) Chain tensioner

ページ5に含まれる内容の要旨

B. SAFETY PRECAUTIONS MEANING OF SYMBOLS Do not dispose inappropriately Warning! of the machine. Deliver it to an Read the authorized instruction organization. manual Always grip the carefully machine with two hands Protective boots Kickback Protective danger goggles or visor, protective Do not expose helmet and to rain or hearing moisture. protection Protective cut- Chain oil proof gloves Protective long, Refrain from cut-proof trous

ページ6に含まれる内容の要旨

reference number of the corresponding component to Where necessary, all other machine parts must be draw the reader’s attention to the main safety replaced exclusively by an Authorised Service procedure linked with that particular situation; the Centre. All danger risks increase considerably if machine parts shown in “A – GENERAL maintenance operations are not performed regularly, DESCRIPTION” are indicated in italics in the text for not performed by competent professional personnel, easy

ページ7に含まれる内容の要旨

6. Health precautions – Chemical agents. Avoid all 11. Work operations chain oil contact with skin and eyes. Never start work with the machine before performing the following: remove the giude bar 7. Health precautions - Electricity. All extension cover guard; make sure that a sufficient amount of oil cords, plugs, and electricity lines must be has reached the chain; make sure you have a homologated, to standard and in compliance with planned retreat path from falling trees (when cutting

ページ8に含まれる内容の要旨

sure that the cable/ extension cord is kept behind the 13. Precautions against fire risk. Never use the user, controlling that it does not create a source of machine in areas where there are naked flames, danger for the user or for other persons, and check inflammable or potentially explosive materials. that it cannot be damaged (by heat, sharp objects, 14. Kickback reaction. The kickback reaction sharp edges, oil, etc); Always assume a stable consists of a violent upwards-reverse action o

ページ9に含まれる内容の要旨

The chain brake can be activated in two modes: the CHAIN CATCHER first using the left wrist by pushing forwards, or when This machine is equipped with a chain catcher (fig.4) it comes into contact with the brake system as a result located under the pinion. This mechanism is of kickback; or by inertia, in the case of particularly designed to arrest the backward chain movement in violent kickback. the case of chain breaking or derailing. These When the machine is used with the bar in horizon

ページ10に含まれる内容の要旨

case do not tighten the chain immediately after use, but wait until it cools down. In cases where the loosened chain needs to be adjusted, always unscrew the bar retaining nuts / knob before adjusting the chain tensioning screw/knob ; adjust the tension and tighten the bar retaining nuts /knob accordingly. E. START-UP AND ARREST 1,4,5,6,7,8,9,11,12,13 Start-up: grip both handles firmly, release the chain Arrest: The machine will stop whenever the switch is brake lever, press and maintain the

ページ11に含まれる内容の要旨

Check that the chain is sharpened correctly (See The cutting side of the chain is composed of the cutting below), in good working condition and that the link (fig.9) with a cutting tooth(fig.10) and a cutting limit tension is correct. If the chain is irregularly worn, or if gauge(fig.11). The difference between these determines the cutting teeth are only 3 mm high, the chain must the cutting depth; a file guide and a 4mm diameter round be replaced(fig.3). file are needed to obtain good sharp

ページ12に含まれる内容の要旨

- At the end of each cutting operation the user will Begin the cut from above for about 1/3 of the notice a considerable change in the strength diameter, and then continue from underneath to meet necessary for controlling the machine. Great care the overcut. must be taken not to loose control . Tree felling. Below is a description of two different types of cutting ATTENTION! : Never attempt to fell a tree if you do operation: not have the necessary experience, and in any case Cutting actio

ページ13に含まれる内容の要旨

and lower cut. The meeting point between the two tree fall cannot be controlled (extremely dangerous!). sides of the notch is called “directional cut line” This For this reason the various cuts must be performed line must be perfectly horizontal at right angles (90°) with great precision. to the felling direction. When cutting operations are completed the tree will The felling cut that provokes the tree fall, is performed begin to fall. Where necessary help tree fall using at 3 to 5 cm abov

ページ14に含まれる内容の要旨

M. TROUBLESHOOTING TABLE Motor does Motor turns The machine Motor turns Braking not start with difficulty starts but improperly or devices do or loses does not cut at reduced not stop the power properly speeds chain properly Make sure the main line is powered Make sure the machine is properly plugged in Make sure your cable/ext. cord is not damaged Make sure that chain brake is not activated Check that chain is properly assembled Check chain lubrification

ページ15に含まれる内容の要旨

N. DECLARATION OF CONFORMITY The undersigned, authorized by H.O.P.I., declares that the following products model: type ES15, ES 15/1, ES 15/2, ES16, ES 16/1, ES18 starting from 2004 onwards, manufactured by H.O.P.I., Valmadrera, Italy, comply with European Directive: 98/37/EEC (Machine Directive), 93/68/EEC (EEC Marking Directive) & 89/336/CEE (Electromagnetic Compatibility Devices), directive 2000/14/EEC (Enclosure V). The following harmonised standards have been applied: EN 50144-1, E


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 McCulloch 41AY06PR966 取扱説明書 チェーンソー 134
2 McCulloch 41AY66CR777 取扱説明書 チェーンソー 29
3 McCulloch 41BY46NQ077 取扱説明書 チェーンソー 10
4 McCulloch 41AY69CR077 取扱説明書 チェーンソー 7
5 McCulloch 41AY69CR977 取扱説明書 チェーンソー 3
6 McCulloch 41CY86AR777 取扱説明書 チェーンソー 4
7 McCulloch 442 取扱説明書 チェーンソー 305
8 McCulloch 576600401 取扱説明書 チェーンソー 9
9 McCulloch 952801946 取扱説明書 チェーンソー 5
10 McCulloch 964830301 取扱説明書 チェーンソー 6
11 McCulloch 964830401 取扱説明書 チェーンソー 4
12 McCulloch 966625201 取扱説明書 チェーンソー 4
13 McCulloch 966625301 取扱説明書 チェーンソー 6
14 McCulloch 966993701 取扱説明書 チェーンソー 3
15 McCulloch 9096311037 取扱説明書 チェーンソー 4
16 Black & Decker 90559281 取扱説明書 チェーンソー 16
17 Black & Decker Saw CS1015 取扱説明書 チェーンソー 7
18 Black & Decker GKC1817NM 取扱説明書 チェーンソー 14
19 Black & Decker CCS818 取扱説明書 チェーンソー 11
20 Black & Decker 3803-10 取扱説明書 チェーンソー 5