ページ1に含まれる内容の要旨
PAGE 1 OF 2
BULLETIN NO.
SERVICE PARTS LIST
54-43-0050
REVISED BULLETIN
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
Mar. 2006
STRAIGHT FINISH NAILER
WIRING INSTRUCTION
STARTING
A89A
CATALOG NO. 7145-21
SERIAL NUMBER
EXAMPLE:
00
0 Component Parts (Small #) Are Included
48
When Ordering The Assembly (Large #).
47
46
2
52
45
3
51
50
44
15 49
4
24
53
5
16
42
43
1
6
17
82
18
37
36
9
25
40
41
85
26
91
86 27
10
35
28
92
11
87
29
25 26 27 28 29 30
12 93 30
97
88 31 32 33 34 35 43
1
ページ2に含まれる内容の要旨
83 84 96 82 82 81 75 76 77 98 75 78 79 80 79 80 74 76 77 65 83 78 66 67 61 70 68 62 69 63 83 71 64 55 106 54 72 56 57 58 73 104 59 60 FIG. PART NO. DESCRIPTION OF PART NO. REQ. FIG. PART NO. DESCRIPTION OF PART NO. REQ. 54 05-84-0995 Bolt Assembly 2 74 44-81-0050 Steel Channel 1 55 42-92-1395 Driver Guide Cover B 1 75 42-92-1475 Protecting Hood Cover 1 56 42-92-1380 Driver Guide Cover A 1 76 05-84-0940 Flat Head Hex Bolt 1 57 06-65-1455 Spring Pin 1 77 43-72-0350 Pusher 1
ページ3に含まれる内容の要旨
BULLETIN NO. 54-43-0050 Mar. 2006 PAGE 2 OF 2 Disassembly: 2, 3, 4, 5, 6 Remove hex bolt (2), deflector (3), muffler (4) and deflector pad (5) from top cap (6). 4 mm hex key required. 1, 6 Remove hex bolts (1) to remove top cap (6). 4 mm hex key required. 7, 8, 9, 10, 11, 12, 13 Remove valve assembly (7, 8, 9, 10, 11, 12, and 13) out of the top cap using a 1/8 in. (3.18 mm) punch. Gently push punch through several different holes in the top of the cap to remove assembly evenly. 15, 20, 44 Rem
ページ4に含まれる内容の要旨
Lubrication: Type I Grease 49-08-7100 Clean all parts with a dry clean cloth. 6, 7, 8, 9, 10, 11, 12, 13 Place a thin coating of grease into internal bore of top cap (6), coat parts (7 – 13) and reassemble in order shown. 16, 17, 18 Coat o-ring (17) and piston ring (16) prior to installing into groove of driver assembly (18). 19, 20, 21 Coat cylinder o-ring (19), and cylinder ring (21) prior to installing onto cylinder (20). 25, 26 27, 28, 29, 30, 31, Coat all parts of the trigger valve assembly
