ページ1に含まれる内容の要旨
Wireless Full Weather Station Kit INTRODUCTION
Thank you for selecting the Oregon Scientific™ Weather
Model: WMR80 / WMR80A
Station (WMR80 / WMR80A).
USER MANUAL
The base station is compatible with other sensors. To purchase
additional sensors, please contact your local retailer.
CONTENTS
Sensors with this logo are compatible with this
Introduction ............................................................... 1
unit.
Packaging Contents ................................................. 1
ページ2に含まれる内容の要旨
4. UNIT: Select unit of measurement RAIN GAUGE 5. SELECT: Switch between the different areas 6. MIN / MAX: Read the max / min memory readings; clear readings 2 x AA UM-3 BACK VIEW 1.5V batteries 4 x Screws (Type B) 1 1 x Rain Collector 6 x Washers ACCESSORIES - SENSORS 2 3 This product can work with up to 3 sensors at any one time to capture outdoor temperature, relative humidity or 4 UV readings in various locations. 5 Optional wireless remote sensors such as those listed below can be
ページ3に含まれる内容の要旨
Temperature Area 1. Clock radio reception 2. Indicate time stamp is displayed 4 3. Time / date / calendar 1 5 4. Offset time zone 2 5. Moon phase 6 3 1. Selected area icon Humidity / Dew Point Area 2. Indoor / Outdoor channel temperature and humidity 1 2 is displayed 3 3. Outdoor sensor battery is low 4. Indicate MAX / MIN temperature is displayed 4 5. Temperature trend 6. Temperature (°C / °F) 1. Indicate Dew point level - Temperature is displayed Wind Speed / Wind Direction / Wind Chill Are
ページ4に含まれる内容の要旨
1. Unscrew the anemometer from the wind sensor carefully. 2. Insert batteries matching the polarities (+ / -) and replace the anemometer. Press RESET after each battery change. ３ a ３ b 1. Funnel 2. Indicator OUTDOOR TEMPERATURE / HUMIDITY 3. Secure the sensor connector in the desired location: SENSOR a. Align the back of the sensor connector to an existing pole. Secure in place by inserting the ends of the U-bolt into the holes on the sensor connector and securing it with washers and b
ページ5に含まれる内容の要旨
7. Secure the sensor in the desired location using the Water will pool to the center of the cross when the rain wall mount bracket. gauge is level. NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below If water remains on 1-4, the gauge is not horizontal. freezing. If necessary, adjust the level using the screw. SET UP RAIN GAUGE The rain gauge collects rain and takes readings of rainfall rate and the total rainfall over a period of time.
ページ6に含まれる内容の要旨
The battery icon indicator may appear in the NOTE For best reception, the base station should be following areas: placed on a flat, non-metallic surface near a window in an upper floor of your home. The antenna should be placed AREA MEANING away from electrical appliances and not be moved around when searching for a signal. Battery in the base station Weather Forecast Area is low. CLOCK / CALENDAR The displayed channel To manually set the clock: Temperature or indicates the outdoor
ページ7に含まれる内容の要旨
2. Press and hold MODE to activate auto-scan. The To view temperature (Current / Min / Max temperature) temperature and humidity display will scroll from readings: 1. Press SELECT to navigate to the Temperature Area. indoor to ch1 through to ch3. 3. Press any key to stop the auto-scan. will show next to the Area. 2. Press + / - to select the channel. 3. Press MIN / MAX to toggle between current / MAX / NOTE Channel 1 is used for the outdoor temperature and humidity sensor. Additional
ページ8に含まれる内容の要旨
The wind level is shown by a series of icons: To view the UV / Barometer / Rainfall readings: 1. Press SELECT to navigate to the UV / Barometer / ICON LEVEL DESCRIPTION Rainfall Area. will show next to the Area. N/A <2 mph (<4km/h) 2. Press MODE to toggle between UVI / Barometer / Rainfall readings. The corresponding icon will appear: Light 2-8 mph (3~13 km/h) UVI BAROMETER RAINFALL Moderate 9-25 mph (~14-41 km/h) Strong 26-54 mph (~42-87 km/h) To select the measurement unit for t
ページ9に含まれる内容の要旨
RAINFALL INDOOR RELATIVE HUMIDITY To view the current rain rate or last 24 hours rainfall Displayed range 2% to 98% history: Operating range 25% to 90% 1. Press SELECT to navigate to the UVI / Barometer / Resolution 1% Rainfall Area. will show next to the Area. Accuracy 25% - 40%: +/- 7% 2. Press MODE repeatedly to select Rainfall display. 40% - 80%: +/- 5% 3. Press MIN / MAX repeatedly to toggle between current, past 24 hour rainfall. 80% - 90%: +/- 7% Memory Current, Min and Max To rese
ページ10に含まれる内容の要旨
REMOTE RAIN GAUGE ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn Dimensions 114 x 114 x 145 mm more about Oregon Scientific products. If you're in (L x W x H) (4.5 x 4.5 x 5.7 inches) the US and would like to contact our Customer Care Weight 241 g (0.54 lbs) without battery department directly, please visit: www2.oregonscientific. com/service/support.asp Rainfall unit Mm/hr and in/hr Range 0 mm/hr – 9999 mm/hr For international inquiries, please visit: www2. Resol
ページ11に含まれる内容の要旨
• Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific. com, or on the warranty card for this product) for all inquiries instead. We Name: Oregon Scientific, Inc. th Address: 19861 SW 95 Ave.,Tualatin, Oregon 97062
ページ12に含まれる内容の要旨
Wireless Full Weather Station Kit Model: WMR80 / WMR80A USER MANUAL 12 WMR80_IM_EN_R1.indd 12 2008.7.1 7:11:53 PM EN
ページ13に含まれる内容の要旨
Wireless Full Weather Station Kit Model: WMR80 / WMR80A © 2008 Oregon Scientific. All rights reserved. USER MANUAL 086L005677-044 13 WMR80_IM_EN_R1.indd 13 2008.7.1 7:11:53 PM EN
