ページ1に含まれる内容の要旨
Introduction
Welcome to the world of sophisticated, early warning laser/radar
detection. You have purchased one of the most advanced laser/radar
detectors available. The LRD 6199SWS is a complete integrated
laser/radar detector. It responds to the X-, K-, and Ka-SuperWideband
radar guns in use today and also provides 360° detection of the latest
speed monitoring system — the laser gun. The built-in Safety Warning
System (SWS™) is capable of detecting a hazardous warning signal
transmitted on the
ページ2に含まれる内容の要旨
Speed Detection Systems A speed detection device (often called a radar gun) sends out either a microwave signal or beam of light. When this signal reaches its target, part of the signal is reflected or bounced back toward the emitting gun. The time required for the signal to leave the gun, bounce off an object, and return is used to determine a vehicle’s distance and speed. Radar Radar (Radio Detection and Ranging) is a microwave system for detecting the speed of moving objects by reflected puls
ページ3に含まれる内容の要旨
Laser The Laser Speed Detection System, also called LIDAR (for Light Detection and Ranging), uses a laser gun that emits infrared light pulses just outside the spectrum of visible light. Each reflected pulse measures the speed of the object coming toward or going away from the laser gun. Unlike radar, the laser gun emits a very narrow beam of light, so it can pinpoint a speeding car within traffic. The infrared beam spreads out, but slowly and over a longer distance than a radar signal. The lase
ページ4に含まれる内容の要旨
Included with Your Radar Detector Windshield Owner’s Guide Clip Printed Material Fuses and Straight Power Cord Spare Parts If any of these items are missing or damaged, contact your dealer immediately. Be sure to complete and mail the Product Registration Card. 4 njdfjnjnjfnjfjn njdfjnjnjfnjfjn jnkjnjksnkjsnfj jnkjnjksnkjsnfj dfksfmkm dfksfmkm kfmkmkmlf kfmkmkmlf sfkkmmfmsmsm\ sfkkmmfmsmsm\ kkoioionksnkln kkoioionksnkln mmkmkkl njdfjnjnjfnjfjn njdfjnjnjfnjfjn mmkmkkl jnkjnjksnkjsnfj jnkjnjksnkjs
ページ5に含まれる内容の要旨
Controls and Functions 1 2 3 4 5 DC12V 9 6 8 7 1. Clip Release — Press the clip release button to remove the LRD 6199SWS from the windshield mounting clip. 2. Rear and Side Laser Detector Lenses — For rear and side detection of laser signals. 3. City Button — Press the CITY button to help reduce X-band false alarms while driving in the city. When you turn on the City Mode, the City indicator turns on. While driving on highways, turn off the City Mode for long-range detection. 4. Audio Button — P
ページ6に含まれる内容の要旨
6. DC 12V Power Input — Connect the DC power cord here. Note: Use on a Uniden® supplied power cord or its replacement. 7. LED Display — LEDs display visual alerts, signal strength, and operation mode. 8. On-Off/Volume Control — Turns the power on and adjusts the Audio Alert volume. 9. Speaker — Sounds audio alert. There are four different audio alert tones to distinguish each type of signal received. When you become familiar with all the distinct alert tones, you can operate the LRD 6199SWS just
ページ7に含まれる内容の要旨
XK Ka L SWSP 1 2 3 4 C M 12 3 4 5 6 7 89 1. X-Band Signal Indicator — A green LED lights and blinks to indicate the presence of an X-band radar signal. The blink rate increases as the radar source gets closer. A distinct audio alert is also heard. 2. K-Band Indicator — An amber (orange) LED lights and blinks to indicate the presence of a K-band radar. The blink rate increases as the radar source gets closer. A distinct audio alert is also heard. 3. Ka-SuperWideband Signal Indicator — A yellow LE
ページ8に含まれる内容の要旨
Installation The LRD 6199SWS uses a highly sensitive horn-type antenna and IR laser sensor to receive radar/laser signals. Its sensitivity and range depend on the method of installation and the direction of the antenna/sensor in relation to the signal source. The inherent nature of radar waves makes them reflect off metallic surfaces. This is why these waves are so useful for measuring the speed of a vehicle. The IR laser light may reflect only from shiny surfaces. Both radar waves and IR laser
ページ9に含まれる内容の要旨
Adjusting the Windshield Mounting Clip 1. The metal portion of the bracket locks into the plastic portion at three different positions. These positions can be used for vehicles with different vertical angles of their windshields. The back position can be used for vehicles with windshields that are slanted back. 2. For optimum laser detection, bend the angled portion of the windshield mounting bracket so that the LRD 6199SWS is parallel to the road surface. Be sure the LRD 6199SWS is mounted so i
ページ10に含まれる内容の要旨
CITY MUTE AUDIO Connecting the Power The LRD6199SWS is designed to operate on most 12 VDC negative ground vehicle electrical systems. The power cord provided with the unit has a cigarette lighter socket plug at one end and a small connector at the other. 1. Insert the small connector into the jack on the side of the unit. 2. Insert the other end into the cigarette lighter socket of your vehicle. When installing the power cord, make sure that: • The socket is clean to allow proper contact. • The
ページ11に含まれる内容の要旨
Replacing the Fuse The cigarette lighter plug contains a 1-ampere fuse to protect it from power surges. 1. To replace the fuse, unscrew the top of the plug. 2. Remove the fuse and replace it with the same type. 3. To replace the top, push in the two metal contacts and twist into place. Note: Your LRD 6199SWS comes with an extra fuse. 11
ページ12に含まれる内容の要旨
Operation You are now ready to enjoy the convenience and security of your LRD 6199SWS. Please read this section of the Operating Guide carefully to familiarize yourself with the basic operation of this unit. Power On Turn the Volume control to switch on the power. When you power up the LRD 6199SWS, it performs a self-test of all its circuits. This test takes about 5 seconds, during which you will hear the different alarm tones and see all the LEDs. First, you will hear the X-band alarm for 2 sec
ページ13に含まれる内容の要旨
Full Warning When the LRD 6199SWS detects a radar, laser, or safety warning signal, it emits a distinct warning tone and the corresponding alert LEDs (X, K, Ka, L, or SWS) will light and blink. The blink rate of the LEDs increases and the signal strength meter LEDs light successively as the signal source comes closer. Audio Alert Only Operation Press the AUDIO button for Audio Alert Only operation. CITY MUTE AUDIO When Audio Alert Only is selected, the visual alert and signal strength meter are
ページ14に含まれる内容の要旨
Visual Alert Only Operation You can operate the LRD 6199SWS in Visual Alert Only by setting the Volume control at the minimum position in Full Alert Mode. At this setting you can barely hear the audio alert in a quiet environment. Be sure that the Audio Alert Only indicator is off. Auto Mute Operation Press the Mute button to activate the Auto Mute feature. CITY MUTE AUDIO When the Mute indicator is selected, the unit is in Auto Mute Mode. In this mode you hear the full audio alert when a signal
ページ15に含まれる内容の要旨
City Operation In highly populated areas, you may encounter many devices that use the same frequencies as radar signals, such as motion detectors, automatic doors, and intrusion alarms. These devices may trigger an alert called “falsing.” To filter most of the weaker signals and get the most accurate radar signal recognition, press CITY to turn on the City Mode. CITY MUTE AUDIO The City indicator lights. In City Mode, the combination of visual and audio alert tones varies based on the strength o
ページ16に含まれる内容の要旨
LED Signal Strength Meter in City Mode The LED signal strength meter gives you instant information about the strength of the signal being detected. A weak signal causes the first LED to light, but as signal strength increases, more LEDs light. All four LEDs light when full signal strength is received. Use this meter to judge the distance from the signal source. Signal Strength X-, K-, and Ka-Super Laser WideBand ●❍❍❍ Visual Visual/Audio ●●❍❍ Visual Visual/Audio ●●●❍ Visual/Audio Visual/Audio ●●●
ページ17に含まれる内容の要旨
Care and Maintenance The LRD 6199SWS is designed to give you years of trouble-free service. There are no user-serviceable parts inside, and, except for the fuse, no maintenance is required. To keep your detector in new condition, follow these important suggestions: • Never leave the LRD 6199SWS on the windshield when you park your vehicle. The temperature in the vehicle in summer can reach levels above what is considered to be safe for this unit. • To make you less susceptible to break-in and th
ページ18に含まれる内容の要旨
Troubleshooting If your LRD 6199SWS does not perform up to expectations, try the suggestions listed below. If you cannot get satisfactory results, call the Uniden Customer Service Center at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. Unit does not operate: • Check the power cord. Be sure the connectors (Power LED not on) are properly installed. • Be sure ignition key is ON or in the accessory position. • Fuse out. Check and replace. • Check power to lighter socket
ページ19に含まれる内容の要旨
Specifications General 1 5 5 Dimensions: 3 in. (W) x 4 in. (D) x in. (H) 9 8 6 Weight: 3.5 oz. Power Requirements: 13.8 VDC Temperature Range: Operating: -5°F to 160°F (-20°C to 70°C) Storage: -40°F to 185°F (-40°C to 85°C) 360° Laser Detector Receiver Type: Pulse Laser Signal Receiver Sensor Front End: Convex Condenser Lens Detector Type: Pulse Width Discriminator Receiver Bandwidth: 30 MHz Spectral Response: 800 - 1100 nm Alert Hold Time: 3 seconds Radar Detector Receiver Type: Double Conversi
ページ20に含まれる内容の要旨
Optional Accessories & Replacement Parts Owner’s Windshield Guide Clip Printed Material Fuses and Straight Power Cord Spare Parts 20 njdfjnjnjfnjfjn njdfjnjnjfnjfjn jnkjnjksnkjsnfj jnkjnjksnkjsnfj dfksfmkm dfksfmkm kfmkmkmlf kfmkmkmlf sfkkmmfmsmsm\ sfkkmmfmsmsm\ kkoioionksnkln kkoioionksnkln mmkmkkl njdfjnjnjfnjfjn njdfjnjnjfnjfjn mmkmkkl jnkjnjksnkjsnfj jnkjnjksnkjsnfj skdmkmkm skdmkmkm dfksfmkm dfksfmkm sdmkmfmmmk kfmkmkmlf kfmkmkmlf sdmkmfmmmk mdmklkkkml sfkkmmfmsmsm\ sfkkmmfmsmsm\ mdmklkkkml
