ページ1に含まれる内容の要旨
READ AND SAVE THESE INSTRUCTIONS
Coffee Maker
USE AND CARE GUIDE FOR
MODEL ME2TMDS
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: • Read all instructions. • Do not touch hot surfaces. Use handles or knobs. • To protect against electric shock, do not place cord, plugs, or appliance in water or other liquid. • Close supervision is necessary when any appliance is used by or near children. • Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts
ページ4に含まれる内容の要旨
ADDITIONAL IMPORTANT SAFEGUARDS WARNING: This appliance generates heat and escaping steam during use. Use proper precautions to prevent the risk of burns, fires, or other injury to persons or damage to property. • All users of this appliance must read and understand this Owner’s Manual before operating or cleaning this appliance. • The cord to this appliance should be plugged into a 120V AC electrical outlet only. • Use water only in this appliance! Do not put any other liquids or food products
ページ5に含まれる内容の要旨
CAUTION: A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Do not use an extension cord with this product. POLARIZED PLUG: This appliance has a polarized plug, (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. D
ページ6に含まれる内容の要旨
Your product may vary slightly from illustration. Parts Identification Filter Basket (P/N 31142) Water Chamber with Water Level Indicator Filter Basket Holder Mug Lid(s) (P/N 30909) Flow Nozzle FIGURE B (P/N 31144) Thermal Mugs (P/N 30911) Drip Tray (P/N 31145) Overflow Tray (P/N 31143) Base FIGURE A FIGURE C FIGURE D FIGURE E 6
ページ7に含まれる内容の要旨
Setting the Clock 1. Plug into 120 V~60 Hz outlet. 2. The display will go to AM 12:00 and continue to flash until you press a button. 3. Press the Program button, “SET TIME” will be displayed in the top right corner. 4. Press and hold the HR button for rapid hour advancement. When the desired hour is reached, release the button. 5. Press and hold the MIN button for rapid minute advancement. When the desired minute is reached, release the button. 6. Press the PROG button again. The time is now se
ページ8に含まれる内容の要旨
6. Press Power Switch ON. The LED Indicator Light will turn red. CAUTION: Avoid contact with heated water. IMPORTANT: Do not remove Thermal Mugs until the LED Indicator Light has turned OFF. The LED Indicator Light will turn OFF approximately two minutes after brewing is complete. This delay will allow the last drops of coffee to flow into the Thermal Mugs. 7. After LED Indicator Light turns off, Thermal Mugs may be safely removed. 8. If brewing more than one cycle, allow unit to cool for 10 min
ページ9に含まれる内容の要旨
Care and Cleaning 1. Make sure Power Switch is in the OFF position. The LED Indicator Light will be off. 2. Unplug and allow to cool completely before cleaning. 3. Open Filter Basket Holder and lift up on the tab of Filter Basket. Discard any paper filter and coffee grounds. 4. Wash removable Filter Basket, Drip Tray and Overflow Tray, Mugs and Mug Lids in warm, soapy water. Rinse and dry thoroughly. Or, you may wash the Mugs and Lids in the top rack of a dishwasher. 5. Clean the outside of the
ページ10に含まれる内容の要旨
IMPORTANT NOTICE If any parts are missing or defective, DO NOT return this product. Please call our Customer Relations Department for assistance. 800-233-9054 Monday - Friday 9am - 5pm CST LIMITED ONE YEAR WARRANTY ® Warranty: This Melitta product is warranteed by Salton, Inc. to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product. Warranty Coverage: This warra
ページ11に含まれる内容の要旨
For Products Purchased in the USA, but Used in Canada: You may return the product insured, packaged with sufficient protection, and postage and insurance prepaid to the USA address listed below. Please note that all customs duty / brokerage fees, if any, must be paid by you and we will require you to pay the cost of customs duty / brokerage fees to us in advance of our performing any service. Risk During Shipment: We cannot assume responsibility for loss or damage during incoming shipment. For y
ページ12に含まれる内容の要旨
