ページ1に含まれる内容の要旨
Ver. 1.0
Quick Installation Guide
Wireless N 150 Ultra Mini USB Adapter
Model # AWLL5099
Package Contents:
• Wireless N 150 USB
Adapter
• Driver & Utility CD
• Quick Installation Guide
Section 1
Install the Wireless USB Adapter
This Quick Installation Guide only provides the basic installation instructions.
For detailed instructions of other advanced features, please refer to the User’s
Manual that can be found on the provided CD.
For M
ページ2に含まれる内容の要旨
Windows XP/2000 Users: Windows 7/Vista Users:
ページ3に含まれる内容の要旨
Step 1.3 Insert the Installation CD in the CD ROM drive. The Autorun screen will pop up. Select Install Utility and Driver from the menu. Note: If the Autorun screen doesn’t appear automatically, go to Start, Run, and type D:\Utility\Setup.exe (where D is the letter of your CD ROM drive) and click OK. Windows 7/Vista Users: When you get warning message(s), make sure that you give permission to continue with the installation of the driver software. Step 1.4 The AutoPlay screen wi
ページ4に含まれる内容の要旨
Step 1.5 Click Next to begin the installation. Please wait for Windows to finish installing the Airlink101 Wireless Monitor and driver for Airlink101 Wireless Adapter, and the utility. Step 1.6 Select Yes, I will restart my computer now. Click Finish to complete the installation. The driver and utility have been installed. Please continue to Section 2.
ページ5に含まれる内容の要旨
Section 2 Connect to Wireless Network Step 2.1 Click on the wireless icon in the system tray at the bottom right-hand corner of your screen. Airlink101 Wireless Monitor screen will popup. Click on Available Network tab, a list of available network will be shown.
ページ6に含まれる内容の要旨
Step 2.2 Then, select the one you want to connect to and click Connect. Step 2.3 Enter the network security key if the wireless network you are attempting to connect has wireless encryption enabled. Click OK. The connection should be now established.
ページ7に含まれる内容の要旨
Step 2.4 The Easy Setup Button(WPS compatible button) is a new and easy way to configure the encryption for your wireless network clients, it is Wi-Fi compatible. In order to use it, you need to have a router that supports this feature. If your router doesn’t support WPS compatible function, continue to Step 2.5. 1. Push the Easy Setup Button of the Adapter until you see the following window pops up on the monitor. This window pops up to acknowledge you that the Adapter is st
ページ8に含まれる内容の要旨
3. The router will now start the handshake with the wireless Adapter. The connection will be established in 2 minutes. Notice that there are cases that the WPS button on the router to be pushed first before pushing the one on the adapter. Continue to Step 2.7. If the connection is not able to establish, continue to Step 2.5. Step 2.5 Click the Available Network tab of the Wireless Monitor, select the SSID (Network Name) of the wireless network that you wish to connect to, and click A
ページ9に含まれる内容の要旨
Step 2.6 Enter the wireless security key into the Network Key box if the network you are attempting to connect has wireless security enabled. Click OK. The Adapter will automatically detect the type of Network Authentication and the Data encryption. All you need to do is to enter the Network Key in the appropriate boxes according to the settings of the wireless router and then click OK to connect. Step 2.7 The connection should be now established. O
ページ10に含まれる内容の要旨
Congratulations! You have now connected to the wireless network successfully.
ページ11に含まれる内容の要旨
Troubleshooting 1. If you cannot open the wireless monitor utility, make sure that the USB adapter is inserted firmly into the USB port. 2. If you cannot connect to the wireless router, you may want to double check the wireless security settings on the router. The network key you entered in Step 2.4 must match with the settings on the wireless router. 3. If you are experiencing problems with the connection such as low signal strength, slow connection speed, or unstable wirele
