ページ1に含まれる内容の要旨
Owner's Manual
USB Memory
MODEL WL-10
Memory Viewer
Slide Converter
This is the manual for the Memory Viewer function.
Read this manual thoroughly to operate the Memory Viewer
function.
First, read the owner's manual of the projector to understand
the basic operation of the projector and the safety
instructions.
The safety instructions in the owner's manuals should be
followed strictly.
Italiano Deutsch Español Français English
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
Introduction Memory Viewer function The Memory Viewer function is to make a presentation or project an image without using computers or some other external equipment. You do not have to carry a computer or other equipment to project. Store presentation data or images on a dedicated USB memory and insert it into the USB terminal of the projector, then you can project these images. This projector is also equipped with dedicated Slide Converter software to edit the presentation images to project
ページ4に含まれる内容の要旨
Index Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing the USB Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. Memory Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ5に含まれる内容の要旨
Chapter 1 1. Preparation Read this chapter before use. 5 English
ページ6に含まれる内容の要旨
1. Preparation Installing the USB Memory Install the optionally available USB memory to the USB terminal on the right side of the projector. When installing, confirm the direction of the plug not to damage the terminal. Use optionally available our USB memory (WL-10). If you use other product, the projector may not work properly. The USB terminal is compatible with USB memory formatted with FAT16 or FAT32. It is not compatible with other formats. Please note that when you format the USB memo
ページ7に含まれる内容の要旨
Chapter 2 2. Memory Viewer 7 English
ページ8に含まれる内容の要旨
2. Memory Viewer Cautions in Projecting Images The projector supports only JPEG, Bitmap and index data (.idx) which is edited with Slide Converter. Other data formats are not compatible. Use an optionally available USB memory. When using undesignated product, the projector may not work properly. When storing both the JPEG, Bitmap images and the index file which is edited with Slide Converter on the same USB memory, JPEG/Bitmap data will not be projected. How to Use the Memory Viewer Function
ページ9に含まれる内容の要旨
2. Memory Viewer 3. Select an Image to be displayed. Press the Point buttons on the remote control or the top control of the projector to move the blue framed pointer to the index file to be displayed and then press the SELECT button. Images will be displayed following their configurations. A file not set as Auto Play Press the Point e button to project the next page and d to the previous page. Press the SELECT button to display thumbnails of all the images in the index file. Press the Point b
ページ10に含まれる内容の要旨
2. Memory Viewer 1. Select an Index file you wish to project. Select "Index" in the Viewer menu. Press the MENU button to hide the On-Screen Menu. Select the index file to edit by pressing the Point 78 buttons. Viewer Index Select the index file to edit. 2. Display the Edit Menu Select "Edit" from the Viewer menu and press the SELECT button. Sub-menu will appear. Move the red arrow pointer to the item you wish to select and press the SELECT button. Move the pointer to the item Edit you wish to
ページ11に含まれる内容の要旨
2. Memory Viewer Delete q Move the red arrow pointer with the Point button to "Delete" and press the SELECT button. Move the pointer to "Delete" and press the SELECT button. Reset Quit w Move the red framed pointer to the image you want to delete. e Press the SELECT button. Confirmation dialog box will appear. Select "Yes" to delete the image. X mark will be put over the deleted image. Note: To cancel the delete action, select "Reset" in the Edit menu. In that case, all the other editing op
ページ12に含まれる内容の要旨
2. Memory Viewer Reorder q Move the red arrow pointer to "Reorder" and press the SELECT button. w Move the red framed pointer to the image you wish to move. e Press the SELECT button. A red bar appears at the left side of the selected image. Move the red bar to the position where the image to be placed and press the SELECT button. Confirmation dialog will appear and then select "Yes" to move the image. Note: To cancel the reorder action, select "Reset" in the Edit menu. In that case, all the
ページ13に含まれる内容の要旨
2. Memory Viewer Auto Play Setting Images in the Index file can be projected automatically. Select "Auto Play" in the projector menu and set the interval time between the images. Note: Interval time between images which is set in "Image Switch Timing Settings" (p22) is prior to this Auto Play setting. Auto Play Move the pointer to "On" and set the time with the Point 7 8 buttons. 13 English
ページ14に含まれる内容の要旨
14
ページ15に含まれる内容の要旨
Chapter 3 3. Slide Converter 15 English
ページ16に含まれる内容の要旨
3. Slide Converter About Slide Converter Slide Converter is the software to edit and convert Bitmap, JPEG or PowerPoint files into image data to be projected with Memory Viewer function. This software has various unique edit functions to allow you to make effective presentations. Operating Environment This software requires the following computer environment. Required Operation System Windows 98SE / Me / NT4.0 / 2000 / XP Requirements when using Over RAM 64MB main memory. (More memory will be r
ページ17に含まれる内容の要旨
3. Slide Converter Installing Slide Converter Install Slide Converter on your computer. The software (Slide Converter) is included in the CD ROM provided with the projector. Refer to the owner's manual (Adittional Vol.) of the projector ➔ "2. Setup Procedures" ➔ "Installing the Software" ➔ step 3 to install the Slide converter. Operating Slide Converter Activate Slide Converter. The Edit window as shown below will appear. Import, edit, and save image data by selecting items from the tool bar a
ページ18に含まれる内容の要旨
3. Slide Converter - Capture images on your computer screen [Image] -> [Screen Capture] Capture images on your computer screen and load it to the Edit screen of Slide Converter. If you select "Screen Capture", the following dialog box will appear. Parameter Description Capture..................Capture whole viewing area of the image on your computer screen and imports it to the Edit screen. Set up.....................Set up Display Capture (Refer to the chart below) Exit ..................Close
ページ19に含まれる内容の要旨
3. Slide Converter - Import PowerPoint data [Image] -> [Import PowerPoint File] Convert PowerPoint data to JPEG or Bitmap image and import it to the Edit screen of Slide Converter. *The computer needs to be installed PowerPoint software. Parameter Description Output...................Import the image displayed on the screen. Output All..............Import all the images on the PowerPoint File. Next ......................Display the next image. Back ......................Display the previous ima
ページ20に含まれる内容の要旨
3. Slide Converter - Open or add existing Index files [File] -> [Open Index] Select "Open Index" from File menu to open stored index files on Slide Converter. [File] -> [Add Index] Select "Add Index" from File menu to add another index file to the opened index file. Edit Image files - Cut / Copy / Paste / Delete Select an item from Edit menu. Details for each item is as follows: Parameter Description Cut ........................ Cut the selected image. Copy......................Copy the select
