ページ1に含まれる内容の要旨
DiamondMax 8S 40GB Serial ATA
Product Manual
May 13, 2005
Revision 1
Part Number: 000001912
ページ2に含まれる内容の要旨
® Maxtor Corporation, May 13, 2005. All rights reserved. Printed in U.S.A. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein – which will be incorporated in revised editions of the publication. Maxtor may make changes or improvements in the product(s) described in this publication at any time and without notice. UL/CSA/VDE/TUV /RoHS UL standard 1954 recognition granted under File No. E78016 CSA standard C22.2-95
ページ3に含まれる内容の要旨
This product or document is protected by copyright and distributed under licences restricting its use, copying, distributing, and decompilation. No part of this product or document may be repro- duced in any form by any means without prior written authorization of Maxtor and its licensors, if any. RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject to restrictions as set forth in subparagraphs (c)(1)(ii) of the Rights in Technical Data and Computer Software cla
ページ4に含まれる内容の要旨
Please do not remove or cover up Maxtor factory-installed drive labels. They contain information required should the drive ever need repair.Thank you for your interest in Maxtor hard disk drives. This manual pro- vides technical information for OEM engineers and systems integrators regarding the installation and use of Maxtor hard drives. Drive repair should be performed only at an authorized repair center. For repair infor- mation, contact the Maxtor Customer Service Center at 800-2MAXTOR or 1-
ページ5に含まれる内容の要旨
TABLE OF CONTENTS Chapter 1 INTRODUCTION 1.1 MAXTOR CORPORATION ............................................................................... 1-1 1.2 AUDIENCE............................................................................................................. 1-1 1.3 MANUAL ORGANIZATION..................................................................................1-1 1.4 TERMINOLOGY AND CONVENTIONS ........................................................... 1-2 1.5 REFERENCES ......
ページ6に含まれる内容の要旨
Chapter 4 INSTALLATION 4.1 SPACE REQUIREMENTS..................................................................................... 4-1 4.2 UNPACKING INSTRUCTIONS........................................................................... 4-2 4.3 HARDWARE OPTIONS ....................................................................................... 4-4 4.3.1 JUMPER POSITION....................................................................................... 4-4 4.3.2 STAGGER SPIN-UP ..........
ページ7に含まれる内容の要旨
Table of Contents LIST OF FIGURES Figure 4-1 Mechanical Dimensions.................................................................................4-1 Figure 4-2 Single Pack Shipping Container..................................................................... 4-2 Figure 4-3 25-Pack Shipping Container ......................................................................... 4-3 Figure 4-4 SATA Power/Interface Connector ................................................................ 4-5 Figure
ページ8に含まれる内容の要旨
Table of Contents LIST OF TABLES Table 4-1 SATA Pin 11 Configuration....................................................................................4-5 Table 4-2 Device Plug Connector Pin Definitions ..................................................................4-12 Table 4-3 Logical Addressing Form.........................................................................................4-16 Table 5-1 Supported Commands......................................................................
ページ9に含まれる内容の要旨
Introduction Chapter 1 Introduction 1.1 Maxtor Corporation Maxtor corporation is one of the world’s largest suppliers of hard disk drive products- products that help store the digital world for millions of users. Maxtor products serve a range of markets, including personal and entertainment, small office/home office, mid-sized business and enterprise Products Maxtor storage products include drives and accessories for PC’s, workstations, RAID products, enterprise applications, enterprise serv
ページ10に含まれる内容の要旨
Introduction Chapter 5 – SATA Bus Interface and ATA Commands Chapter 6 – Service and Support Glossary 1.4 TERMINOLOGY AND CONVENTIONS In the Glossary at the back of this manual, you can find definitions for many of the terms used in this manual. In addition, the following abbreviations are used in this manual: ASIC application-specific integrated circuit SATA serial advanced technology attachment bpi bits per inch DA Double Amplitude (represents ph-pk shaker displacement) dB de
ページ11に含まれる内容の要旨
Introduction NCQ Native Command Queuing SATA Serial ATA SOF Start Of Frame tpi tracks per inch µs microseconds V volts The typographical and naming conventions used in this manual are listed below. Conventions that are unique to a specific table appear in the notes that follow that table. Typographical Conventions: Names of Bits: Bit names are presented in initial capitals. An example is the Host Software Reset bit. Commands: Interface commands are listed in all capitals. An ex
ページ12に含まれる内容の要旨
Introduction Attachment, visit the Serial ATA working group at http://www.serialata.org Maxtor DiamondMax 8S 40GB SATA 1-4
ページ13に含まれる内容の要旨
General Description Chapter 2 PRODUCT DESCRIPTION 2.1 PRODUCT DESCRIPTION Maxtor drive leadership continues with the DiamondMax 8S 40GB Serial ATA drive - a single head, 7200RPM product. The DiamondMax 8S 40GB Serial ATA drives combine performance and value with the Serial ATA interface making a perfect choice for entry level consumers and commercial/business desktop systems transitioning to the new interface. The Serial ATA interface provides the fastest desktop interface with maximum data
ページ14に含まれる内容の要旨
General Description Low weight to reduce shipping costs Improved reliability with: ~ Shock Protection System ~ Data Protection System 2.2 THE SERIAL ATA INTERFACE Serial ATA is the next generation ATA interface. It provides faster data transfer speeds, more bandwidth, more potential for speed increases in future generations and better data integrity. Serial ATA hardware is smaller and more compact than traditional parallel ATA components. A powerful command set and hot plug features make
ページ15に含まれる内容の要旨
General Description ® ® Emulation of IBM PC AT task file register, and all AT fixed disk commands TM Windows 2000 , WinXP, and 9X Certification Performance Native Command Queuing 10.1 ms seek time Average rotational latency of 4.17ms 2 MB buffer with 1.9MB (approximate) Advance Cache Management (ACM). Advanced Multi-burst ECC on-the-fly Support of all standard ATA data transfer modes with PIO mode 4 and multiword DMA mode 2, and Ultra DMA modes 0, 1, 2, 3, 4, 5 and 6 Quiet Dri
ページ16に含まれる内容の要旨
General Description 2.4 REGULATORY COMPLIANCE STANDARDS Maxtor Corporation’s disk drive products meet all domestic and international product safety regulatory compliance requirements. Maxtor’s disk drive products conform to the following specifically marked Product Safety Standards: Underwriters Laboratories (UL) Standard 1950. This certificate is a category certification pertaining to all 3.5-inch series drives models. Canadian Standards Association (CSA) Standard C.22.2 No. 1950. This
ページ17に含まれる内容の要旨
Product Specifications Chapter 3 PRODUCT SPECIFICATIONS 3.1 Models and Capacities MODEL NUMBERS NON ROHS COMPLIANT 6E040T0 ROHS COMPLIANT * 6N040T0* Formatted Capacity (GB LBA Mode) 40GB GB means 1 billion bytes. Total accessible capacity varies depending on operating environment. * Complies with European Union Directive on Restriction of Hazardous Substances (Section 3.13) 3.2 Drive Configuration MODEL 6E040T0 40GB Data Surfaces/Number of Heads 1 Number of Disks 1 Sectors per Drive (max LBA
ページ18に含まれる内容の要旨
Product Specifications MODEL 6E040T0 40GB Recording Density (kbpi, ID/OD) ID = 713 OD = 560 Track Density (ktpi) 88.7 3.3 Performance Specifications MODEL 6E040T0 40GB Seek Times (typical read, ms) Track-to-Track Seek 0.8 Average (normal seek) ≤ 10.1 Full Stroke (normal seek) ≤ 18.0 Average Latency (ms) 4.17 Controller Overhead (ms) <0.3 Rotation Speed (RPM ±0.5%) 7200 Data Transfer Speed (MByte/sec max) Interface Transfer Speed (Gb/s) 1.5 To/From Media (ID/OD up to nn.n, where ID = 463 nn.n is
ページ19に含まれる内容の要旨
Product Specifications 3.5 Power Requirements MODE 12V (MA) 5V (MA) POWER (W) Spin-up (peak) 1562 621 21.8 Seek 502 392 8.0 Read/Write 461 414 7.6 Idle 425 230 6.2 Standby 36 229 1.6 Sleep 36 228 1.6 Note: Power numbers are typical values. 3.6 Power Mode Definitions Spin-up The disk drive is spinning up following initial application of power and has not yet reached full speed. Seek A random access operation by the drive. Read/Write Data is being randomly read from or written to the drive. Idle
ページ20に含まれる内容の要旨
Product Specifications 3.7 EPA Energy Star Compliance Maxtor Corporation supports the goals of the U.S. Environmental Protection Agency’s Energy Star program to reduce the electrical power consumption of computer equipment. 3.8 Environmental Limits NON-OPERATING/ PARAMETER OPERATING STORAGE Temperature 0° C to 60°C low temperature (-40° C) high temperature (71° C) per MIL-STD-810E, method 501.3, climatic category; hot-induced conditions. Thermal Gradient 30° C per hour (maximum) Relative H
