ページ1に含まれる内容の要旨
Computer
Motherboard
Attaching cables and mounting the drive
1. Attach one end of the drive interface cable to the interface connector on
your computer’s motherboard (see your computer manual for connector
locations).
Note. When configuring two PATA devices on
DB35 Series PATA Installation Guide
the same cable, both must use Cable
Select or both must use Master/Slave
ST3500641AV, ST3250824AV and ST3160812AV
Master
jumper settings. If you are using a standard
Pin 1
40-pin cable, the maste
ページ2に含まれる内容の要旨
and click on Erase again. Confirm your intentions by clicking Erase once 5. Why won’t the drive format to full capacity? Verify that your BIOS has more to begin formatting the drive. autodetect and LBA mode enabled. Otherwise, you may need to use Dis- kWizard to achieve the full capacity of your drive. Download the latest Installing the drive in Windows XP or Windows 2000 systems version from www.seagate.com or find it on your CD. Additional informa- TM DiscWizard , available exclusively from Se
