ページ1に含まれる内容の要旨
SY-P4I845PE Lite
Motherboard
Quick Start Guide
Davicom The SOYO CD Quick BIOS Hardware Introduction
USB2.0 Driver
Onboard LAN Setup Installation
Installation
Driver
ページ2に含まれる内容の要旨
SOYO™ 1. AGP card with 3.3V is not supported, only AGP card with 1.5V can be used in this mainboard. 2. Please read the user guide before proceeding your installations. Serious damage may occur if the procedure is not followed properly. 3. If you have any problem getting your system to work, please follow the trouble shooting tips on page 25 of your user guide. 4. For immediate Technical questions, please visit www.soyousa.com/support, www.soyousa.com/kb. 5. Make sure to u
ページ3に含まれる内容の要旨
SOYO™ SY-P4I845PE Lite Motherboard mPGA Socket 478 processors Intel 845PE AGP/PCI Motherboard 533/400 MHz Front Side Bus supported ATX Form Factor Copyright © 2003 by SOYO Computer Inc. Trademarks: SOYO is a registered trademark of SOYO Computer Inc. All trademarks are properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only. The registered trademarks and copyrights belong to their
ページ4に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide 1 Introduction 1 Congratulations on your purchase of the SY-P4I845PE Lite Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-P4I845PE Lite Motherboard User's Manual that came with your Motherboard. Unpacking When unpacking the Motherboard, check for the f
ページ5に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide SY-P4I845PE Lite Motherboard Layout PS/2 KB P PS S//2 Mous 2 Mouse e Connector Connector COM A +12V Power COM B ATX Power PRT USB 1_2 LAN Connector AOUT AIN J30 IDE 2 1 2 DDR1 DDR2 DDR3 AGP Slot LAN AMIC DAVICOM DM9102AE 56 AGAME FJ1 PCI Slot #1 AC97 Audio JP5 CMOS Clear Jumper 3 PCI Slot #2 PCI Slot #3 IDE 1 AUXIN1 CDIN1 4 1 1 4 PCI Slot #4 ITE PCI Slot #5 IT8712F-A FLP 3V Lithium PCI Slot #6 Battery USB20_1 USB20_2 SMCARDCN 13 1 SIRCON 10 6 10 6 14 2 5 1
ページ6に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide Key Features ® Supports Intel mPGA Socket 478 Supports multiple-boot function processors AGP 2.0 Compliant; ® - Pentium 4 AGP Connector supports: - 1.5V only AGP cards Supports 533/400 MHz Front Side Bus - 4X data transfer Frequency Smart Card Reader PC99, ACPI - Compliant with Personal Computer Ultra 33/66/100 (ATA 33/66/100) Smart Card (PC/SC) Working Group Supports Wake-On-LAN (WOL) standard Supports PC1600/PC2100/2700 1 x 32-
ページ7に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide 2 Installation 2 To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. Check the Motherboard for damage. If any chip appears to be loose, press carefully to
ページ8に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide Install the Motherboard We will now begin the installation process. Please follow the systematic procedure designed to lead you to a complete and correct installation. Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Connect cables, case wires, and power supply Install expansion cards Step 4- Install expansion cards Step 1. Install the CPU ® CPU Mount Procedure: To mount the Pentium 4 Socket mPGA478 proces
ページ9に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide FJ1 jumper (beside the AGP slot) This jumper sets the default boot-up CPU frequency and the group of FSB frequencies that can be selected in the BIOS. Auto Detect FSB CPU FSB 100MHz FSB 133MHz FSB (Default) FJ1 Jumper 32 1 32 1 32 1 Step 2. Configure Memory This motherboard support PC2100 and PC2700, non-ECC and non-registered module. The largest memory capacity possible is 2GB. On this motherboard, DRAM speed can be set independent from the CPU f
ページ10に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide FJ1 Table: FJ1 Available multiplier in the “DRAM:CPU multiplier” option 1-2 (default) Auto detect 2-3 1.33 Open 1.00 / 1.25 / by SPD Your memory frequency is dependent on your CPU front side bus frequency. It is calculated by: Memory frequency. = DRAM multiplier (set in the CMOS setup) * CPU front side bus frequency * 2 Note: • If you plan to use the memory at the default speed, set the FJ1 to 1-2 (auto detect) • When using a 400MHz CPU, you need
ページ11に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide Connectors and Plug-ins CPU Cooling Fan: CPUFAN1 CPU Cooling Fan: CPUFAN2 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 GND +12V Sensor GND +12V Sensor Chassis Fan: CHAFAN1 Chassis Fan: CHAFAN2 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 GND +12V Sensor GND +12V NC CD-IN 1 AUXIN1 Pin1 Pin2 Pin3 Pin4 Pin1 Pin2 Pin3 Pin4 Left GND GND Right Left GND GND Right Standard IrDA (Infrared Device Header): MIC & LED Connector: J30 SIRCON Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3 Pin4 Pin5
ページ12に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide Power On/Off: PWRBT Connect your power switch to this header (momentary switch type). To turn off the system, press this switch and hold down for longer than 4 seconds. ATX 12V Power Supply: ATX PW Attach the ATX 12V Power cable to three connector. (This motherboard requires an ATX 12V power supply, an AT and ATX power supply can NOT be used.) When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to provide a
ページ13に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide Step 4. Install expansion cards The motherboard has 1 AGP slot and 6 PCI slots. 1. Read the instruction document of the related expansion card before inserting the expansion card into the computer. 2. Press the expansion card firmly into expansion slot in motherboard. 3. Be sure the metal contacts on the card is seated in the slot. 4. Replace the screw to secure the slot bracket of the expansion card. 5. Install related driver from the operating syste
ページ14に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide CMOS Clear (JP5) In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory. 1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be easily identified by its white colored cap. 2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory. CMOS Clearing Clear CMOS Data Retain CMOS Data Short pin 2-3 for Short pin 1-2 to JP5 Setting at least 5 sec
ページ15に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide Audio Speakers connections When using 2 channel speaker, connect the speaker cable to line-out. If you’re using 4 channel speaker, connect the front L/R speakers to line-out and rear L/R speakers to Line-in. make sure to set the audio software for 4 channel speaker system. Don’t forget to set the Audio Rack software to 4 channel system. Line-out Line-in Onboard LAN LED Definition When this LED is lit, this This is the LAN activity LED
ページ16に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide 3 Quick BIOS Setup 3 This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO FEATURE]. The [SOYO COMBO FEATURE] combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the
ページ17に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide 4 The SOYO CD 4 The SOYO-CD will Auto Run only in Windows Base Operating System. Your SY-P4I845PE Lite motherboard comes with a CD-ROM labeled “SOYO CD”. The SOYO CD contains a. The user’s manual for your new motherboard in PDF format, b. The drivers software available for installation, and c. A database in HTML format with information on SOYO motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive If you use Windows NT
ページ18に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document Format). In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. The Start Up program automatically detects if the Acrobat Reader utility is already Note: present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual fi
ページ19に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide driver revision: Intel Chipset Software Installation Utility for Win 98/98SE/ME/2000/XP Intel Application Accelerator for Win 98/98SE/ME/NT/2000/XP Intel USB2.0 Driver for Win 98/ME Intel USB2.0 Driver Installation for Win XP (click here for installation procedure) C-MEDIA Audio Driver/Application for Win 9x/ME/2000/NT/XP Davicom Onboard Lan Driver for Win 9x/ME/NT/2000/XP P4I845PE Lite hardware monitor for Win 9x/ME/2000/NT/XP ITE SIM Card reader Driver/Utili
ページ20に含まれる内容の要旨
SY-P4I845PE Lite Quick Start Guide Davicom Onboard Lan Driver for Win 9x/ME/NT/2000/XP This Setup program will install the Driver for Davicom Onboard Lan. P4I845PE Lite ITE hardware doctor for Win 9x/ME/2000/NT/XP Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored. ITE SIM card reader Driver/Utility for Win 9X/ME/NT/2K/XP Driver to support the smart card reader. You need to install this if you use the SC
