ページ1に含まれる内容の要旨
™
Sun StorEdge 5210 NAS
Quick Reference Manual
Sun Microsystems, Inc.
www.sun.com
Part No. 817-6659-11
November 2004, Revision A
Submit comments about this document at: http://www.sun.com/hwdocs/feedback
ページ2に含まれる内容の要旨
Copyright 2004 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to technology that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.sun.com/patents and one or more additional patents or pending patent applications in the U.S. and in other countries. This do
ページ3に含まれる内容の要旨
Contents 1. Introduction 1 About This Quick Reference Manual 1 Sun StorEdge 5210 NAS Features 1 Software Requirements and Updates 3 2. Turning the Sun StorEdge 5210 NAS On and Off 5 Powering On the Sun StorEdge 5210 NAS 5 Network Setup and System Configuration 7 Shutting Down the Sun StorEdge 5210 NAS 8 3. Network Configuration 11 How to Configure Server Properties 11 How to Configure Network Adapters 12 About Alias IP Addresses 14 How to Set the Default Gateway Address 14 How to Set Up DNS 15 4
ページ4に含まれる内容の要旨
Configuring Directory Tree Quotas 21 How to Create Sun StorEdge File Checkpoints 23 5. Windows Configuration 33 How to Configure Microsoft Networking 33 How to Set Up WINS 36 Windows Shares 37 How to Configure Autohome Shares 41 How to Publish Shares in ADS 43 6. UNIX Configuration 51 How to Configure Name Services 51 How to Configure Hosts 58 How to Set Up NFS Exports 60 Mapping User and Group Credentials 62 7. System Backup 65 How to Set Up NDMP 65 8. Monitoring and Notification 67 How to Conf
ページ5に含まれる内容の要旨
Contacting Technical Support 83 Index 85 Contents v
ページ6に含まれる内容の要旨
vi Sun StorEdge 5210 NAS Quick Reference Manual November 2004
ページ7に含まれる内容の要旨
Figures FIGURE 2-1 Expansion Unit Back Panel 6 FIGURE 2-2 Connecting the Sun StorEdge 5210 NAS AC Power Cables 6 FIGURE 2-3 Power Switch and Front Panel Detail 7 FIGURE 2-4 The Shutdown Panel 9 FIGURE 2-5 The LCD Panel Controls 9 FIGURE 3-1 The Set Server Name Panel 11 FIGURE 3-2 The Configure Network Adapters Panel 13 FIGURE 3-3 The Set Gateway Address Panel 14 FIGURE 3-4 The Set Up DNS Panel 15 FIGURE 4-1 The Create File Volumes Panel 19 FIGURE 4-2 The Attach Segments Panel 20 FIGURE 4-3 The C
ページ8に含まれる内容の要旨
FIGURE 4-13 The Run Dialog Box 31 FIGURE 5-1 The Configure Domains and Workgroups Panel 34 FIGURE 5-2 The Set Up WINS Panel 36 FIGURE 5-3 The Configure Shares Panel 38 FIGURE 5-4 The Add Share Dialog Box 39 FIGURE 5-5 The Configure Autohome Shares Panel 42 FIGURE 5-6 The Set Time and Date Panel 44 FIGURE 5-7 The Configure Domains and Workgroups Panel 45 FIGURE 5-8 The Configure Name Services Panel 47 FIGURE 5-9 The Set Up DNS Panel 48 FIGURE 5-10 The Add Share Dialog Box 49 FIGURE 6-1 The Set Up
ページ9に含まれる内容の要旨
FIGURE 9-6 The View Controller Information Panel 80 FIGURE A-1 The Diagnostic Email Dialog Box 82 ix
ページ10に含まれる内容の要旨
x Sun StorEdge 5210 NAS Quick Reference Manual November 2004
ページ11に含まれる内容の要旨
Tables TABLE 5-1 Share Path Examples 37 TABLE 5-2 Umask Permission Examples 41 TABLE 9-1 Add LUN Drive Status Images 75 xi
ページ12に含まれる内容の要旨
xii Sun StorEdge 5210 NAS Quick Reference Manual November 2004
ページ13に含まれる内容の要旨
CHAPTER 1 Introduction About This Quick Reference Manual This guide is designed as a quick reference to familiarize the user on using different ™ features and functions of the Sun StorEdge 5210 NAS software. The screens displayed on your monitor may vary from those in this reference guide. For more details on software features and functions, refer to the Sun StorEdge 5210 NAS Software Installation, Configuration, and User Guide on the documentation CD. Sun StorEdge 5210 NAS Features Note – F
ページ14に含まれる内容の要旨
Network Security/Protocols Integrates with: ■ Windows Domain Controller ■ Network Logon (Netlogon) client ■ Windows Domain support ■ Multiple Master Domain (MMD) support ■ CIFS Security Descriptors (SD) on file and directories ■ Discretionary Access Control Lists (DACL) on files and directories ■ NIS ■ NIS+ ■ NTFS streams ■ Unicode ■ Windows Active Directory Service (ADS) support ■ Windows Dynamic DNS support ■ Windows-compatible Kerberos (v5) security ■ Windows-compatible Lightweight ■ Microsof
ページ15に含まれる内容の要旨
Hardware RAID Subsystem ■ Multiple file system options ■ The Sun StorEdge 5210 NAS is configured for maximum file protection using hardware RAID 5 (disk striping with parity) Data Management ■ Sun StorEdge File Checkpoint facility allows users to recover accidentally damaged or deleted data with a simple file copy operation ■ Directory Tree Quotas ■ User and Group Quotas Setup and Configuration ■ SNMP MIB ■ Web-Based User Interface for system configuration and administration ■ Command Line Int
ページ16に含まれる内容の要旨
Web Administrator Requirements To access the Web Administrator management interface, you must have the following software: ■ Windows 98/NT/2000/XP/2003, Sun Solaris 5.7 Operating System, or Red Hat Linux ■ Internet Explorer 5.5 (or later) on systems using Windows 98/NT/2000/XP or ™ ■ Netscape 4.77 (or later) software on systems using Windows 98/NT/2000/XP/2003 and Sun Solaris Operating System. Netscape 6.0 and 6.01 are not supported. ™ ■ Mozilla browser ™ ■ Java technology-enabled browser wi
ページ17に含まれる内容の要旨
CHAPTER 2 Turning the Sun StorEdge 5210 NAS On and Off Powering On the Sun StorEdge 5210 NAS Caution – ALWAYS power on the units in the following order: 1.Expansion unit(s) first. 2.Sun StorEdge 5210 NAS Filer. After making sure your network connection is secure, turn on the Sun StorEdge 5210 NAS following the steps below. If you do not have any expansion units, skip to Step 5. 1. Verify that all cables between the Sun StorEdge 5210 NAS and expansion unit(s) are properly secured according t
ページ18に含まれる内容の要旨
2. Connect both AC power cables to the back of each expansion unit. Power Supply 1 Switch Power Supply 2 Switch AC Power Cord/Plug 1 AC Power Cord/Plug 2 SCSI Cable to NAS Filer Head FIGURE 2-1 Expansion Unit Back Panel 3. Connect the other end of the power cables to an AC power source. 4. For each expansion unit turn on the two power supply switches. 5. Connect one end of the AC power cable to the Sun StorEdge 5210 NAS (Figure 2-2). RJ-45 SCSI Cable to optional AC Power Cords/Plugs Network Ca
ページ19に含まれる内容の要旨
8. Press the Power button (Figure 2-3) on the front panel (behind the front cover). FIGURE 2-3 Power Switch and Front Panel Detail Network Setup and System Configuration For a detailed explanation of network setup and system configuration, refer to the Software Installation, Configuration, and User Guide "Introduction" on the documentation CD. If DHCP is supported, the IP address is automatically configured when you power the system up for the first time. Note – Write down the IP address for
ページ20に含まれる内容の要旨
System Configuration To configure the NAS system, use a separate system with a Java-enabled browser connected to the network. 1. Check that the network link LED is green and then enter in the browser window the IP address for the NAS system in the format: http://123.111.78.99 2. Click Apply to log in and follow the steps to complete the system configuration. Note – Once you reach the login screen, you may want to bookmark it or add it to your favorites so that you do not have to remember the
