ページ1に含まれる内容の要旨
SKYR@CER WIRELESS USB STICK
QUICK INSTALLATION GUIDE
BEKNOPTE INSTALLATIEHANDLEIDING
GUIDE D’INSTALLATION RAPIDE
INSTALLATIONSKURZANLEITUNG
GUÍA DE INSTALACIÓN RÁPIDA
GUIA DE INSTALAÇÃO RÁPIDA
KORTFATTAD INSTALLATIONSHANDLEDNING
HURTIG INSTALLATIONSGUIDE
HURTIGINSTALLASJON
PIKA-ASENNUSOPAS
ページ2に含まれる内容の要旨
This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on : http://www.topcom.net/support/cedeclarations.php For use in: Belgium, Holland, Germany, Sweden, Denmark, Norway, Finland, Spain, Italy, Portugal, Greece, Turkey
ページ3に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 3 Before You Start 4 1. INSTALL THE SKYR@CER WIRELESS USB STICK DRIVER AND UTILITY 5 2. CONFIGURE THE WIRELESS UTILITY 8 3. CONFIGURE THE TCP/IP SETTINGS ON THE WIRELESS USB STICK 12 4.WARRANTY 14 SECURITY WARNING To avoid that uninvited users will access your wireless network it is strongly recommended to activate WEP (or WPA if available) encryption of your wireless network. ENGLISH
ページ4に含まれる内容の要旨
4 Topcom Skyr@cer Wireless USB Stick BEFORE YOU START Before installation, please check your system and ensure it meets the minimum requirements: - Processor: min. Pentium II 300 Mhz or higher - Operating System: Microsoft Windows 98SE / ME / 2000 / XP - System memory: 32MB at least - Hard Drive Free Space: 5Mb - CD rom drive - Free USB port Important : To prevent problems during installation, please insert the auto-run CD and install the driver first before you plug the Skyracer Wireless USB
ページ5に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 5 1. INSTALL THE SKYR@CER WIRELESS USB STICK DRIVER AND UTILITY 1. Insert the CD rom into the CD rom drive 2. The CD will start automatically. (If the autorun does not start, please execute the autorun.exe on the CD) 3. Select Install Software to install the Wireless LAN Utility together with the drivers. ENGLISH
ページ6に含まれる内容の要旨
6 Topcom Skyr@cer Wireless USB Stick 4. In the Wireless LAN Setup screen, click Next to start driver installation. 5. Click “Next” to install at the designated folder. Or, click “Browse” to select different folder.
ページ7に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 7 6. Click Finish to terminate the installation. If necessary, the computer will ask to reboot. (Windows 98 se and Me) 7. Insert the Skyracer Wireless USB Stick into a free USB port of your PC. Windows will detect new hardware and start the installation of the driver. 8. Click “Finish” to complete the Setup. ENGLISH
ページ8に含まれる内容の要旨
8 Topcom Skyr@cer Wireless USB Stick 2. CONFIGURE THE WIRELESS UTILITY After installation of the driver and utility, you will have new icon in the Windows system tray. For Windows 98Se , Me and 2000: double click the skyracer wireless USB icon : to open the configuration tool. • Select ‘Refresh’ to view all available wireless Access Points • Double click the SSID name to connect with this access point
ページ9に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 9 • Select ‘More settings’ to set the SSID , network type and WEP encryption. For Windows XP : this operating system has its own wireless LAN tool build in. To open the WLAN configuration, double click the wireless network icon in the system tray. ENGLISH
ページ10に含まれる内容の要旨
10 Topcom Skyr@cer Wireless USB Stick This will open the configuration tool: Select the wireless available WLAN network and click ‘Connect’. Or select ‘Advanced…’ for more settings.
ページ11に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 11 Click ‘Refresh’ to search available WLAN networks. Select WLAN network and click ‘Configure” to activate WEP and enter WEP key of the wireless network you want to connect. Note : You only have data transfer to a WEP secured WLAN network when the WEP key is set identical on WLAN network and PC that uses the wireless USB stick. If WEP key is not set or wrong, the PC can connect (in some cases) but will not communicate (no data). Note : If you double click
ページ12に含まれる内容の要旨
12 Topcom Skyr@cer Wireless USB Stick 3. CONFIGURE THE TCP/IP SETTINGS ON THE WIRELESS USB STICK You can only have data communication between the WLAN network and the PC with the wireless USB stick if the TCP/IP settings are set properly. Please ask your network administrator for TCP/IP setting : IP address = fixed or received automatically from the DHCP server, subnetmask , gateway and DNS. Click with the right mouse button on ‘my network places’ icon and select properties. Click right mo
ページ13に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 13 Select ‘TCP/IP settings’ and click ‘properties”. Fill in according to your WLAN network settings the IP address or select ‘obtain an IP automatically’ and DNS settings. Click OK and exit the wireless network settings. Now it should be possible to connect and transfer data with the WLAN network. Note : The first time you connect to the WLAN network it can be necessary to ‘renew’ the IP address if the network provides the IP address automatically. This can be
ページ14に含まれる内容の要旨
14 Topcom Skyr@cer Wireless USB Stick 4. WARRANTY •This equipment comes with a 24-month warranty. The warranty will be honoured on presentation of the original bill or receipt, provided the date of purchase and the unit type are indicated. • During the time of the warranty Topcom will repair free of charge any defects caused by material or manufacturing faults. Topcom will at its own discretion fulfil its warranty obligations by either repairing or exchanging the faulty equipment. • Any warr
ページ15に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 15 Voor u van start gaat 16 1. INSTALLATIE VAN DE DRIVER EN HET HULPPROGRAMMA 17 2. HET DRAADLOZE HULPPROGRAMMA CONFIGUREREN 21 3. DE TCP/IP-INSTELLINGEN OP DE DRAADLOZE USB-STICK CONFIGUREREN 25 4.GARANTIE 27 VEILIGHEIDSWAARSCHUWING Om te verhinderen dat ongewenste gebruikers zich toegang tot uw draadloze netwerk verschaffen, raden we u ten zeerste aan de WEP- (of WPA indien voorhanden) encryptie van uw draadloze netwerk in te schakelen. NEDERLANDS
ページ16に含まれる内容の要旨
16 Topcom Skyr@cer Wireless USB Stick VOOR U VAN START GAAT Controleer, vóór de installatie, uw systeem en zorg ervoor dat het voldoet aan de minimumvereisten: - Processor: min. Pentium II 300 Mhz of hoger - Besturingssysteem: Microsoft Windows 98SE / ME / 2000 / XP - Systeemgeheugen: Minimum 32MB - Vrije ruimte op harde schijf: 5Mb - cd-romstation - Vrije USB-poort Belangrijk: Plaats, om problemen tijdens de installatie te vermijden, de auto-run CD in het cd-romstation en installeer eers
ページ17に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 17 1. INSTALLATIE VAN DE DRIVER EN HET HULPPROGRAMMA 1. Plaats de CD in uw cd-romstation. 2. De CD zal automatisch starten. (Als autorun niet start, voer dan autorun.exe op de CD uit) 3. Selecteer Install Software om het Wireless LAN Utility te installeren samen met de drivers. NEDERLANDS
ページ18に含まれる内容の要旨
18 Topcom Skyr@cer Wireless USB Stick 4. Op het installatiescherm voor het Wireless LAN klikt u op Next om de installatie van de driver te starten.
ページ19に含まれる内容の要旨
Topcom Skyr@cer Wireless USB Stick 19 5. Klik op "Next" om de driver in de opgegeven map te installeren. Of klik op "Browse" om een andere map te selecteren. 6. Klik op Finish om de installatie te voltooien. Indien nodig, zal de computer u vragen om opnieuw te starten. (Windows 98 se en Me) 7. Steek de Skyr@cer Wireless USB Stick in een vrije USB-poort op uw PC. Windows zal nieuwe hardware detecteren en de installatie van de driver starten. NEDERLANDS
ページ20に含まれる内容の要旨
20 Topcom Skyr@cer Wireless USB Stick 8. Klik op "Finish" om de installatie te voltooien.
