ページ1に含まれる内容の要旨
ATX Computer Case R7439K
User Manual
ページ2に含まれる内容の要旨
ATX Computer Case R7439K User Manual Chapter 1 Product Introduction Drawing ………………………………….........................……….. 2 Specification……………………………......................…….……. 2 Chapter 2 Installation Removing and installing side panels..........................................3 Installing the Motherboard.........................................................3 Installing Add-on card ...............................................................4 Installing Dr
ページ3に含まれる内容の要旨
ATX Computer Case R7439K User Manual Chapter 1: Introduction Mechanical Drawing: Specifications: Dimensions 200mm(W) x 430mm(H) x 480mm(D) M/B Type ATX 12” x 9.6” (30.5cm x 24.5 cm); Micro-ATX Material SECC Metal 0.8cm 5.25” Drive Bay 4 (Exposed) 3.5” Drive Bay 1 (Exposed); 5 (Hidden) I/O Panel USB2.0 x 2; MIC x 1; SPK x 1 Cooling System One 120mm rear fan ( Exhaust ) Power Supply Standard ATX PS2, 350W Expansion slot 7 slots 2
ページ4に含まれる内容の要旨
ATX Computer Case R7439K User Manual Chapter 2: Installation Removing and installing side panels 1. Loosen the thumb screws from the back and pull the side panel backward to remove it. 2. Fit the hooks of the panel to the elongated holes on the edges of casing, and slide the panel toward and secure with screws to install the panel. Installing the Motherboard 1. Installing the IO panel that comes with Motherboard package. 2. Aiming at the holes on the Motherboard, and secure the copper
ページ5に含まれる内容の要旨
ATX Computer Case R7439K User Manual Install add-on card 1. Pressing the slot cover and bend forward and backward to remove it. 2. Insert the add-on card. 3. Secure the add-on card with screws. Installing Drives (CD/DVD ROM, FDD and HDD) 1. Detach the front panel from the casing by pressing the clips that on the rear side of front panel. 2. Remove the metal cover of the bay. 3. Insert the device in place; and secure with screws. 4
ページ6に含まれる内容の要旨
ATX Computer Case R7439K User Manual Replacing the power device 1. Loosen the screws to remove the power supply. 2. Place the power supply on the power rack with the wiring end facing forward and connect it to the back of the casing. 3. Secure the power supply device with screws. Replacing/Installing the Case Fan Change the Front Fan 1. Loosen the fan screws from the rear casing, and remove the fan. 2. Install the new fan and secure it with screws. 5
ページ7に含まれる内容の要旨
ATX Computer Case R7439K User Manual I/O Function Panel Installation Guide Please refer to the illustration on the section of USB2.0 and Audio connector from the motherboard user’s manual. The following illustration is a connection diagram for the front panel I/O cable. Please check with your motherboard manual before installing. 6
ページ8に含まれる内容の要旨
ATX Computer Case R7439K User Manual Thank you for purchasing Rosewill Product. Please register your product at www.rosewill.com for complete warranty information and future support for your product. 7
