ページ1に含まれる内容の要旨
R
HDD
Cipher
CipherChain
PWR
eSATA
T E C H N O L O G I E S
User Guide
Cipher RAID Tower
(CRT535PES)
www.addonics.com
v5.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
ページ2に含まれる内容の要旨
IMPORTANT There is no back door for the Cipher tower encrypted hard drives if the Cipher keys are lost or stolen. Cipher key Check to make sure you have the correct version of the Cipher key. A sample key is shown Black label AES-256 stands for Cipher 256-bit key. To ensure there is a spare key, your Cipher tower comes with a pair of Cipher keys. These cipher keys have all identical encryption code unless you requested then to be coded differently. One of these keys should be kept in a sa
ページ3に含まれる内容の要旨
R HDD Cipher CipherChain PWR eSATA HD LED Auxillary Power Switch HD LED HD Power Switch eSATA Port Power & HDD LED Cipher Keyhole II. Connecting the power cable and Cipher Tower to the computer a. Connect the power cord provided from the wall outlet to the back of the Cipher Tower. b. A main power switch is located at the back of the tower. Turn the switch on. Another auxiliary switch is located on the front of the tower. c. Make sure the power is off on the auxiliary switch (
ページ4に含まれる内容の要旨
III. Initial setup of the Cipher tower: a. Insert the AES 256-bit cipher key into the cipher keyhole located at the front of the Cipher tower. b. Power on the Cipher tower. Observed that the green Cipher power LED at the front of the Cipher tower is on. If not, reinsert the cipher key and re-power the Cipher tower. c. Option of individual drive or raid volume configuration: 1. Individual drive configuration: When the Cipher tower is connected to a eSATA Host controller w
