ページ1に含まれる内容の要旨
User Manual
AIMB-221
Socket S1g1
AMD 64X2 Turion / Mobile
Sempron Processor
HyperTransport Speed 800 MHz
Industrial Mini-ITX Motherboard
with DDR2/Dual GbE/PCI
ページ2に含まれる内容の要旨
Copyright This document is copyrighted, 2008, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes
ページ3に含まれる内容の要旨
Declaration of Conformity This device complies with the requirements in part 15 of the FCC rules: Operation is subject to the following two conditions: ! This device may not cause harmful interference ! This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A dig- ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonabl
ページ4に含まれる内容の要旨
Memory Compatibility AIMB-221 Memory Tested for Compatibility Brand Size Speed Type ECC Vendor Advantech Memory Result PN PN 256 DDR2 SODIMM N M20SS2 NA SAMSUNG 52B PASS MB 533 DDR2 F3G3410 K4T56083QF-GCD5 A1BOZ (32x8) A-DATA 512 DDR2 SODIMM NM20EL2 NA ELPIDA JAPAN PASS MB 533 DDR2 G3H3410 E5108AB-5C-E A1BOZ (64x8) 256 DDR2 SODIMM N 78.82054 NA ELPIDA JAPAN PASS Apacer MB 533 DDR2 .420 E5116AB-5C-E 05050WPWA (64x8) 1 DDR2 SODIMM N 78.02G6 96SD2- ELPIDA PASS Apacer GB 667 DDR2 3.423 1G667NN-
ページ5に含まれる内容の要旨
256 DDR2 SODIMM N TS32MS NA Hynix PASS MB 667 DDR2 Q64V6M HY5PS121621BFP- Y5 512 DDR2 SODIMM N TS64MS NA SAMSUNG PASS MB 667 DDR2 Q64V6J K4T51083QC ZCE6 (64x8) 1 DDR2 SODIMM N TS128M NA SAMSUNG PASS GB 667 DDR2 SQ64V6J K4T51083QC ZCE6 Tran- (64x8) scend 2 DDR2 SODIMM N TS256M NA Micron D9HNL PASS (RoHS) GB 667 DDR2 SQ64V6 (128x8) U 1 DDR2 SODIMM N TS128M NA HYNIX PASS GB 800 DDR2 SQ64V8J HY5PS12821E-FP- S5 (64x8) 2 DDR2 SODIMM N TS256M NA Micron D9HNP PASS GB 800 DDR2 SQ64V8 (128x8) U 512 D
ページ6に含まれる内容の要旨
Initial Inspection Before you begin installing your motherboard, please make sure that the following materials have been shipped: ! AIMB-221 AMD 64 X2 Dual Core Mini ITX industrial motherboard P/N: 2006022110 ! 1 AIMB-221 startup manual P/N: 2066022100 ! 1 CD with utility & User's Manual P/N: 1750001620 ! 1 CPU Cooler P/N: 1701400452 ! 1 Ultra ATA 66/100 HDD cable P/N: 1700003194 ! 2 Serial ATA HDD data cable P/N: 1703150102 ! 2 Serial ATA HDD power cable P/N: 1960019192T000 ! 1 I/O port brack
ページ7に含まれる内容の要旨
Contents Chapter 1 Hardware Configuration......................1 1.1 Introduction ............................................................................................... 2 1.2 Features.................................................................................................... 2 1.3 Specifications ............................................................................................ 3 1.3.1 System.............................................................................
ページ8に含まれる内容の要旨
Table 2.1: ATX power supply LED status (No support for AT pow- er)............................................................................. 23 2.5 ATX/AT Mode Selector (JPSON1).......................................................... 24 Table 2.2: ATX/AT Mode selector (PSON1).............................. 24 2.6 Serial Port Header (COM 3/4/5/6)........................................................... 25 2.7 CPU Fan Connector (CPU Fan1) .....................................................
ページ9に含まれる内容の要旨
3.4.17 APIC Mode.................................................................................. 57 3.5 Advanced Chipset Features.................................................................... 58 Figure 3.4 Advanced Chipset Features screen ......................... 58 3.5.1 Memory Hole At 15M-16M.......................................................... 58 3.5.2 Configure AMT BIOS Support (Intel Active Management Technology) .............................................................
ページ10に含まれる内容の要旨
3.10.1 Spread Spectrum........................................................................ 67 3.11 Password Setting.................................................................................... 68 3.12 Save & Exit Setup................................................................................... 69 3.13 Exit Without Saving................................................................................. 69 Chapter 4 Chipset Software Installation Utility and VGA Setup71 4.1 Before
ページ11に含まれる内容の要旨
Chapter 1 1Hardware Configuration
ページ12に含まれる内容の要旨
1.1 Introduction The AIMB-221 is the most advanced AMD M690T/M690E series industrial mother- board for industrial applications that require high-performance computing. The moth- erboard supports the mobile and desktop Socket S1g1 Athlon 64/Athlon 64FX/Athlon X2/AMD Sempron/AMD Turion 64 processors with 200, 400, 600, 800, and 1,000 MHz HyperTransport (HT) interface speeds and DDR2 533/667/800 MHz memory up to 4 GB. The AIMB-221 incorporates the AMD M690T/M690E chipset to offer cost-effective TM
ページ13に含まれる内容の要旨
Chapter 1 Hardware Configuration 1.3 Specifications 1.3.1 System ! CPU: AMD S1g1 Turion 64X2 Dual Core and Mobile Sempron processor up to 2.1/2.0 GHz, HT 800 MHz. Advantech also certifies several optional high-perfor- mance CPU coolers for high-speed CPUs in 2U chassis or in high-temperature environments. Note! Advantech offers one CPU Cooler in the standard package. This cooler is capable of keeping the temperature of 35 W-thermal-spec CPUs within specification under the environmental tempe
ページ14に含まれる内容の要旨
1.3.3 Input/Output ! PCI Bus: 1 PCI slots, 32-bit, 33 MHz PCI 2.2 compliant ! Enhanced parallel port: Configured to LPT1 or disabled. Standard DB-25 female connector provided. Supports EPP/SPP/ECP ! Serial ports: Six serial ports, one DB-9 (RS-232) connector and one DB-9 (RS- 232/422/485) connector on rear IO, and four onboard pin header (RS-232). Ports can be individually configured to COM1, COM2, COM3, COM4, COM5, COM6 or disabled. ! Keyboard and PS/2 mouse connector: Two 6-pin mini-DIN con
ページ15に含まれる内容の要旨
Chapter 1 Hardware Configuration 1.5 Board Layout: Jumper and Connector Locations LAN1 USB78 LAN2 COM12 USB34 USB12 Audio VGA,HDMI JESTCOM2 USB56 GPIO1 KBMS JESTCOM1 JCMOS1 FPAUD1 SYSFAN1 SPKOUT1 BAT1 LPC BIOS SATA2 SATA4 CPUFAN SATA1 LPT1 SATA3 PCI INV1 SODIMM VGA2/TV-Out (Optional) LVDS JLVDS1 COM3456 IDE SYSFAN2 JWDT1 JFP3 JPSON1 ATX1 DVI (Optional) Figure 1.1 Jumper and Connector locations AUDIO1 COM2 VGA KBMS LAN1_USB12 LAN2_USB34 COM1 HDMI Figure 1.2 I/O connectors 5 AIMB-221 User Manua
ページ16に含まれる内容の要旨
USB 2.0/1.1 1.6 AIMB-221 Block Diagram Channel A DDR2 533/667/800 AMD Socket S1g1 Dual Core Mobile Turion/ Sempron Processor Channel B DDR2 533/667/800 CRT VGA Sideport Memory DVO LVDS 24-bit LVDS AMD M690E TFP 410 DVI (Option) HDMI PCIe x8 DVO GbE-LAN1: PCI-Express x 1 1 ATA 133 port DMA 66/100/133 Realtek RTL8111C 300MB/s 4 SATA ports GbE-LAN2: PCI-Express x 1 Realtek RTL8111C (Optional) SB 600 8 USB Ports 32-bit/33MHz Realtek ALC655 AC-97 PCI1 PCI Bus Edge Connector LPC Super IO Winbond BIOS
ページ17に含まれる内容の要旨
Chapter 1 Hardware Configuration 1.7 Jumpers and Connectors Label Function Page JCMOS1 Clear CMOS jumper 9 JWDT1 Watchdog timer output 9 JPSON1 Power ATX/AT mode selector 10, 24 JSETCOM1 RS-232 power mode selector for COM1 10, 30 JSETCOM2 RS-232/422/485 jumper for COM2 10, 31 IDE1 Primary IDE connector 16 DVI2 DVI connector (AIMB-221F-00A1E only) 18 JFP1, 2, 3 Front panel connector 20 COM3/4/5/6 Serial port connectors for 4 serial ports 25 ATX1 20Pin ATX power connector - CPUFAN1 CPU fan power c
ページ18に含まれる内容の要旨
1.8 Safety Precautions Warning! Always completely disconnect the power cord from your chassis when- ever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sud- den power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the motherboard. Modern electronic devices are very sensitive to static electric charges. As a safet
ページ19に含まれる内容の要旨
Chapter 1 Hardware Configuration 1.9.2 CMOS clear (JCMOS1) The AIMB-221 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, set JCMOS1 to 2-3 closed for just a few seconds, and then move the jumper back to 1-2 closed. This procedure will reset the CMOS to its default setting. Table 1.1: CMOS (JCMOS1) Function Jumper Setting * Keep CMOS data 1-2 closed Clear CMOS
ページ20に含まれる内容の要旨
Table 1.3: ATX/AT mode selector (JPSON1) Function Jumper Setting AT Mode 1-2 closed ATX Mode* 2-3 closed *Default setting Table 1.4: COM1 RS-232 with 5V or 12V selector (JSETCOM1) Use jumper to select the 5V or 12V mode for COM1. The default setting is RS-232 ring in. RS-232 Ring In RS-232 with 5 V RS-232 with 12 V 12 12 12 Table 1.5: COM2 RS-232/422/485 mode selector (JSETCOM2) Use JP1 to select the RS-232/422/485 mode for COM2. The default setting is RS-232.
