ページ1に含まれる内容の要旨
T E C H N O L O G I E S
User Guide
Compact RAID
(CPR5SA)
www.addonics.com
v5.1.11
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
ページ2に含まれる内容の要旨
Enclosure Overview HD0 - HD4 Lock Mechanism Power LED HD0 – HD4 Button Functions: A. Push-Open Button - Press button for each drive slot to open the front HDD panel. - If the locking mechanism is set to LOCK position, the button cannot be pressed. Put the locking mechanism to UNLOCK position to be able to press the push-open button and open the front HDD panel. B. Drive Activity LED Power LED Action Message Color Light On Power starting Blue Light On System is rea
ページ3に含まれる内容の要旨
Power Switch / Buzzer Disable Button Reset Device / Change Mode Button RAID Setting Dip Switch eSATA Connection Power Connector Installation Guide 1. To open the front panel, press the push-open button. 2. Slide the 2.5” SATA hard drive into the slot. Push back the front panel. Two Options for Setting RAID on the Compact RAID Box (only select one option) I. Using the JMicron HW RAID Manager utility program For Windows users, install the JMicron HW RAID Manager located on the SATA Contr
ページ4に含まれる内容の要旨
II. Using the onboard RAID DIP switch RAID Status DIP Switch 1 2 3 RAID 0 (stripped) ON ON ON RAID 10 ON ON OFF JBOD (Large) ON OFF ON RAID 3 ON OFF OFF Clone OFF ON ON RAID 5 OFF ON OFF RESERVED OFF OFF ON Normal (Individual drives) OFF OFF OFF a. Select the setting desired using the DIP switch table. b. Using the provided eSATA to eSATA cable, connect one end to the eSATA port on the RAID box and the other end to the eSATA controlle
