ページ1に含まれる内容の要旨
E3360
First Edition
August 2007
Xonar D2X
Audio Card
Quick Installation Guide
ページ2に含まれる内容の要旨
English 1.1 Installation requirements To ensure a successful installation of the Xonar D2X audio card, your computer must meet the following requirements: • One PCI Express 1.0 (or higher) compatible slot for the audio card • One available 4-pin power cable from PC’s power supply unit ® ® • Microsoft Windows Vista/XP(32/64bit)/MCE2005 ® ® • Intel Pentium 4 1.4GHz or AMD Athlon 1400 CPU or faster CPU • > 256 MB DRAM system memory • > 60 MB available HDD space for driver installation package; >
ページ3に含まれる内容の要旨
1.2 Card installation To install the Xonar D2X audio card: 1. Touch the metal back or side panel of the computer to avoid static electricity. 2. Power OFF the computer, the monitor, and all other peripheral devices connected to your computer. 3. Unplug the computer power cord from your computer and power outlet. 4. Remove the chassis cover. 5. Locate an empty PCIE slot on the motherboard. 6. Connect the power cable of the power supply to the power connector on the audio card. 7. Align and inse
ページ4に含まれる内容の要旨
English 1.3 Driver installation After installing the Xonar D2X audio card on your computer, you need to install the device driver that enables the Xonar D2X audio card to work with Windows operating system. The version and content of the driver CD are subject to change without notice. If you have already installed the ASUS Xonar D2X audio card, the Found New Hardware Wizard window may pop up before or during driver installation. See figure below. 1.3.1 Installing the Audio Card Driver To in
ページ5に含まれる内容の要旨
1.4 Connecting speakers LED color definition This audio card comes with LEDs in different colors that defines each port. Red MIC In Line In Blue Front Out Green Orange Side Surround Center & Subwoofer White Back Surround Amber No LED SPDIF In No LED SPDIF Out For Analog Spakers 2 Speakers ASUS Xonar D2X Quick Installation Guide 5 English
ページ6に含まれる内容の要旨
English 2.1 Speakers 4 Speakers 6 ASUS Xonar D2X Quick Installation Guide
ページ7に含まれる内容の要旨
4.1 Speakers 5.1 Speakers ASUS Xonar D2X Quick Installation Guide 7 English
ページ8に含まれる内容の要旨
English 6.1 Speakers 7.1 Speakers 8 ASUS Xonar D2X Quick Installation Guide
ページ9に含まれる内容の要旨
For Digital Speakers SPDIF Out Plug the optical TOSLINK adaptor into the S/PDIF-Out combo connector. Then, connect your decoder’s S/PDIF in port to the optical adaptor with the TOSLINK optical cable You can also use a coaxial cable for a S/PDIF connection. Just plug the coaxial RCA male connector to the S/PDIF-Out combo jack and connect the other end into the coaxial S/PDIF input on your decoder. SPDIF In Plug the optical TOSLINK adaptor into the S/PDIF-In combo connector. Then, connect you
ページ10に含まれる内容の要旨
English Connecting headphone / microphone Connecting Line-In audio sources 10 ASUS Xonar D2X Quick Installation Guide
