ページ1に含まれる内容の要旨
P8C WS
Motherboard
ページ2に含まれる内容の要旨
E7435 Revised Edition V2 May 2012 Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if
ページ3に含まれる内容の要旨
Contents Notices ....................................................................................................................... vi Safety information ..................................................................................................... vii About this guide ....................................................................................................... viii P8C WS specifications summary ..............................................................................
ページ4に含まれる内容の要旨
Contents Chapter 3: BIOS setup 3.1 Knowing BIOS ............................................................................................3-1 3.2 BIOS setup program ..................................................................................3-1 3.2.1 EZ Mode......................................................................................3-2 3.2.2 Advanced Mode ..........................................................................3-3 3.3 Main menu ................................
ページ5に含まれる内容の要旨
Contents 4.3.1 EPU .............................................................................................4-4 4.3.2 FAN Xpert....................................................................................4-5 4.3.3 Probe II........................................................................................4-6 4.3.4 Sensor Recorder .........................................................................4-7 4.3.5 ASUS Update .........................................................
ページ6に含まれる内容の要旨
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
ページ7に含まれる内容の要旨
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power
ページ8に含まれる内容の要旨
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the switches, jump
ページ9に含まれる内容の要旨
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task. Typography Bold text Indicate
ページ10に含まれる内容の要旨
P8C WS specifications summary ® nd rd CPU LGA1155 socket for Intel 2 / 3 Generation Core™ i3 desktop processor ® ® LGA1155 socket for Intel Xeon E3-1200/ 12x5 v2 series processor Supports 32nm / 22nm CPU ® * Supports Intel Turbo Boost technology 2.0. ® ** Refer to www.asus.com for Intel CPU support list. ® Chipset Intel C216 Chipset Memory 4 x DIMMs, max. 32GB, DDR3 1600 / 1333 MHz, ECC non-ECC, un-buffered memory Dual-channel architecture ® Supports Intel Extreme Memory Profile (XMP) **Refer
ページ11に含まれる内容の要旨
P8C WS specifications summary ASUS GPU Boost with switch Unique ASUS Power Design Features - 8+2 Phase Power Design ASUS EPU - EPU, EPU Switch ASUS Exclusive Features - MemOK! - AI Suite II - Anti Surge - ASUS EFI BIOS EZ Mode featuring friendly graphics user interface ASUS Quiet Thermal Solution: - ASUS Fanless Design: Heat-pipe solution - ASUS Fan Xpert ASUS EZ DIY: - ASUS Q-Connector - ASUS CrashFree BIOS 3 - ASUS EZ Flash Utility Back Panel I/O 1 x PS/2 KB/MS port Ports 1 x S/PDIF Out (Opti
ページ12に含まれる内容の要旨
xii
ページ13に含まれる内容の要旨
Chapter 1 Chapter 1: Product introduction 1.1 Welcome! ® Thank you for buying an ASUS P8C WS motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items. ASUS P8C WS motherboard User manual Suppor
ページ14に含まれる内容の要旨
Chapter 1 1.3 Special features 1.3.1 Product highlights Green ASUS This motherboard complies with the European Union’s Energy-related Products (ErP) requirements, which requires products to meet certain energy efficiency criteria for energy consumption. This in in keeping with ASUS’ vision of creating environment-friendly and energy-efficient products to reduce a product’s carbon footprint and reduce its environmental impact. ® LGA1155 socket for Intel Second/Third Generation Core™ i3 and
ページ15に含まれる内容の要旨
Complete USB 3.0 Integration This motherboard offers you the strategic USB 3.0 accessibility for both the front and rear panels, allowing you to experience the convenience of the latest plug & play connectivity solution at speed up to ten times faster than USB 2.0. GPU Boost GPU Boost accelerates the integrated GPU for extreme graphics performance, facilitates flexible frequency adjustments, and easily delivers stable system-level upgrades for every use. EPU EPU (Energy Processing Unit), th
ページ16に含まれる内容の要旨
Chapter 1 Quick Gate Quick Gate is a vertical USB connector on the motherboard that allows you to install USB devices directly without any messy cables and stops important data storage devices from breaking off unexpectedly. This revolutionary and unique design offers a convenient and safe way to install data and applications on your system. Diagnosis LED Diag. LED offers an intuitive way to locate the root problems in seconds. It checks these key components in sequence during bootup --- CPU
ページ17に含まれる内容の要旨
ASUS Fanless Design—Heat-pipe solution The aesthetically-designed crystal-shaped heatsink features the 0-dB thermal solution for a noiseless and stable computing environment. DO NOT uninstall the heat-pipe by yourself. Doing so may bend the tubing and affect the heat dissipation performance. Fan Xpert ASUS Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds based on different ambient temperatures and attain a quiet and cool computing environment. ASUS EZ DIY ASUS
ページ18に含まれる内容の要旨
Chapter 1 ASUS CrashFree BIOS 3 ASUS CrashFree BIOS 3 allows you to restore a corrupted BIOS file from a USB storage device containing the BIOS file. Precision Tweaker 2 Precision Tweaker 2 allows you to adjust the CPU voltager in 0.01V steps and the DRAM voltage in 0.001V steps to achieve the most precise and ultimate overclocking settings. IEEE 1394a interface IEEE 1394a interface provides high speed digital interface for audio/video devices such as digital television, digital video camcord
ページ19に含まれる内容の要旨
Chapter 2 Chapter 2: Hardware information 2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching
ページ20に含まれる内容の要旨
Chapter 2 2.2 Motherboard overview 2.2.1 Motherboard layout Refer to 2.2.8 Internal connectors and 2.3.10 Rear panel connection for more information about rear panel connectors and internal connectors. 2-2 Chapter 2: Hardware information
