ページ1に含まれる内容の要旨
Autodesk Effects and Editing 2008 Hardware Setup Guide for HP xw9400 Workstations
®
AUTODESK
EFFECTS and EDITING
2008
®
HP xw9400 WORKSTATION
Hardware Setup Guide
ページ2に含まれる内容の要旨
© 2007 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Portions of this software are copyright © 2.1.19 The FreeType Project (www.freetype.org). All rights reserved. Portions relating to Python version 2.3.3 Copyright © 2001, 2002, 2003 Python Softwar
ページ3に含まれる内容の要旨
Portions relating to Libpopt Copyright ©1998 Red Hat Software. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The
ページ4に含まれる内容の要旨
Disclaimer THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC., DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS. Published by: Autodesk, Inc. 111 Mclnnis Parkway San Rafael, CA 94903, USA Title: Autodesk Effects and Editing 2008 Hardware Setup Guide for HP xw9400 Workstations Document Version: 1
ページ5に含まれる内容の要旨
conten Contents ts 1Introduction 1 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Related Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Workflow for Hardware Setup and Application Installation . . . . . . . .
ページ6に含まれる内容の要旨
Con tents 4 Setting Up Audio Hardware 31 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 About Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Audio Wiring Workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Audio Hardware Components . . . . . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
Introduction Summary About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Workflow for Hardware Setup and Application Installation . . . . . . . . . . . . . . . . . 3 Hardware Configuration Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BIOS a
ページ8に含まれる内容の要旨
1 Introduction Related Documentation The following tables list the documentation associated with the current release. For details on each of these documents, as well as for help obtaining them, refer to your application’s release notes. User and Reference Guides Description User’s Guide Detailed instructions on using the application What’s New A complete list of the new features for this release Online Help All of the information in the User’s Guide along with powerful search functionality Ho
ページ9に含まれる内容の要旨
Workflow for Hardware Setup and Application Installation Other Product Reference Guides Description Autodesk Backburner User’s Guide Information on how to use Autodesk Backburner™ Autodesk Wiretap Web Installation and Information on how to install, set up, and use User’s Guide Autodesk Wiretap™ Web Consult the Autodesk Web site at www.autodesk.com/discreet-documentation for the latest version of all documents. Workflow for Hardware Setup and Application Installation The following procedure pr
ページ10に含まれる内容の要旨
1 Introduction a good idea to read through all chapters to familiarize yourself with the configuration procedures for the following reasons: � Many suspected problems with your system may be due to loosened connections or improperly configured devices. This guide helps you troubleshoot problems by providing information about properly configured systems. � If you need to call Customer Support, familiarity with this guide puts you in a better position to provide diagnostic information. � If y
ページ11に含まれる内容の要旨
Hardware Configuration Guidelines Ensuring Proper Environmental Conditions You should consider the following environmental guidelines for all hardware configuration: � Place all components in an air-conditioned environment. All hardware components generate heat and must be kept cool. See “Power and Air Conditioning Requirements” on page 5. � Make sure the rack on which hardware components are mounted is open or well ventilated. Follow the ventilation specifications that apply to your system. S
ページ12に含まれる内容の要旨
1 Introduction Unit Conversion Example 1 Watt = 3.413 BTU 384 Watts = 1228.68 BTU 12000 BTU = 1 Ton of air conditioning 1228.68 BTU = 0.102 Ton of air conditioning Rack Mount Requirements You can rack mount your Effects or Editing system. Plan for sufficient space in your rack mount chassis to install the following components: � An HP xw9400 system � An AJA OEM-2K breakout box 2 � A Miranda DVI-Ramp � A Stone Direct storage chassis (XR model) � Additional Stone Direct expansion chassis (XE mod
ページ13に含まれる内容の要旨
BIOS and Firmwares XLR-3 cables shipped with your system. Using any other cables may cause humming in the system. Receiving Your Shipment When you receive your shipment, check all the boxes for dents or other markings that may indicate damage during transport. If you suspect a component is damaged, carefully inspect it before setting up the system. If you receive a damaged component, call Customer Support. Use the enclosed packing checklist to ensure that you received all of the parts. BIOS a
ページ14に含まれる内容の要旨
1 Introduction Each platform supported by the version of your Effects or Editing application has its own directory that contains an .iso file. NOTE: For more information about updating the BIOS on your workstation, refer to the README file also located in the platform’s directory. 4. Type: cd 5. Burn the .iso file onto a CD-ROM and place it in the DVD-ROM drive on the workstation. 6. Reboot the workstation and press F10 to enter BIOS. 7. Select a language. 8. From the File menu,
ページ15に含まれる内容の要旨
BIOS and Firmwares BIOS Menu Item Value Boot Order, Hard Drive Integrated SATA Integrated IDE Advanced OS Power Management, ACPI S3 Disabled Support Chipset / Memory, ECC Support Enabled Chipset / Memory, Memory Enable Scrubbing Chipset / Memory, Memory Enable Node Interleave Chipset / Memory, PCI Serr# Enable Generation Chipset / Memory, Net Enable Watchdog Timer Chipset / Memory, ACPI Bus Disabled Segmentation Chipset / Memory, HPET Enabled I/O Device Options, S5 Wake on LAN Disabled WARNING
ページ16に含まれる内容の要旨
1 Introduction 2 Verifying DVI-Ramp and DVI-Ramp Firmware The firmware on your DVI-Ramp must correspond to the certified version required by your Effects or Editing application version. Each firmware is itself associated to a DVI-Ramp version and a hardware version. If the firmware on your DVI-Ramp does not match the hardware version listed in the table below, you must update the firmware to the certified version. Effects or Editing Product Version Hardware Version Certified Firmware Version
ページ17に含まれる内容の要旨
BIOS and Firmwares The output is similar to the following example: Versions: Hardware = Micro = Genlock = 3.21 DVI = 4.01 FrameBuffer = 4.05 SDI = 4.10 Where is the current version of the DVI-Ramp hardware, and is the firmware currently loaded in the DVI ramp. If the firmware version does not match the hardware version listed in the table that precedes this procedure, you must perform the firmware update procedure. Up
ページ18に含まれる内容の要旨
1 Introduction AJA OEM-2K PCI-X Firmware System configuration is done prior to delivery by an authorized technician. The following procedures may not be necessary, and are provided here for informational purposes only. Verifying the AJA OEM-2K PCI-X Firmware The firmware on your AJA OEM-2K PCI-X (AJA PCI-X) must correspond to the certified version required by your Effects or Editing application version. If the firmware on your AJA PCI-X board does not correspond to the table below, you must
ページ19に含まれる内容の要旨
BIOS and Firmwares To update AJA PCI-X firmware: 1. Log in as root and open a terminal. 2. Insert the DKU CD in the CD-ROM drive. 3. Mount the CD-ROM by typing: mount /mnt/cdrom NOTE: If your workstation has multiple CD-ROM drives, the drive containing the DKU CD may not be mapped as /mnt/cdrom. You can use any mapped CD-ROM drive for this procedure by using the appropriate mount point for the CD-ROM drive in your workstation in these steps. 4. Go to the AJA_firmwareUpdate directory on the DK
ページ20に含まれる内容の要旨
1 Introduction If your workstation does not prompt you to power down, press the power button for 10 seconds to force a power down. 9. Disconnect the power cord. 10. Wait 10 seconds, reconnect the power cord, then restart your workstation normally. Notation Conventions A number of style conventions are used throughout this guide. These conventions and examples of their use are shown as follows. Convention Example Text that you enter in a command line or shell appears in rpm -qa Courier bold. Yo
