ページ1に含まれる内容の要旨
Dell™ PowerEdge™ Cluster
FE655W Systems
Platform Guide
www.dell.com | support.dell.com
ページ2に含まれる内容の要旨
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2006–2007 Dell Inc. All rights reserved. Reproduction in any manner whatsoeve
ページ3に含まれる内容の要旨
Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Supported Cluster Configurations . . . . . . . . . . . . . . . . . . . . . . . . . 6 System Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Rules and Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Attaching Your Cluster to a Shared Storage System in a Direct-Attached Cluster Configuration . . . . . . . . . . . . . . . . . . . . . . 8 Rules and Guidelin
ページ4に含まれる内容の要旨
4 Contents
ページ5に含まれる内容の要旨
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. ® ® NOTE: Unless explicitly stated, reference to Microsoft Windows Server 2003 in this guide implies reference to Microsoft Windows Server 2003 Enterprise Edition
ページ6に含まれる内容の要旨
Supported Cluster Configurations This section provides information about supported cluster configurations for your PowerEdge Cluster FE655W solution. Table 1-1 provides a list of supported cluster configurations for the PowerEdge Cluster FE655W solution running Windows Server 2003 Enterprise Edition on a PowerEdge 1855/1955 server enclosure. NOTE: The server modules used in a cluster, including their Fibre Channel daughter cards, must be identical. NOTE: The PowerEdge Cluster FE655W solution
ページ7に含まれる内容の要旨
System Configurations The PowerEdge Cluster FE655W solution supports the following Fibre Channel configurations: Fibre Channel embedded switches connected to external SAN fabrics Fibre Channel embedded switches connected to up to two storage systems Fibre Channel pass-through modules connected to a storage system Fibre Channel pass-through modules connected to external SAN fabrics Rules and Guidelines When configuring your cluster, all cluster nodes must contain identical versions of the
ページ8に含まれる内容の要旨
Attaching Your Cluster to a Shared Storage System in a Direct-Attached Cluster Configuration This section provides the rules and guidelines for attaching your cluster nodes to the shared storage system using a direct connection (without Fibre Channel switches). In a direct-attached configuration, both the cluster nodes are connected directly to the storage system. Rules and Guidelines The rules and guidelines described in Table 1-2 apply to direct-attached clusters. Table 1-2. Direct-Attached
ページ9に含まれる内容の要旨
Attaching Your Cluster to a Shared Storage System in a SAN-Attached Configuration A PowerEdge Cluster FE655W solution may include the following hardware components in a SAN configuration: Multiple clusters and non-clustered server modules, but is limited to no more than two PowerEdge 1855/1955 server enclosures. The supported storage system configurations using internal fabrics include: – One Dell|EMC storage system – Two Dell|EMC storage systems – One Dell|EMC storage system and one Del
ページ10に含まれる内容の要旨
Table 1-3. Rules and Guidelines for Dell PowerEdge Clusters (continued) Rule/Guideline Description Ethernet module Two Gigabit Ethernet pass-through modules. Fibre Channel module Two Brocade SilkWorm 3014/4016 Fibre Channel switch modules. *Two McData 4314/4416 Fibre Channel switch modules. Two Fibre Channel pass-through modules. Fibre Channel switch Brocade SilkWorm 200E, *3250, *3850, *4100, *5000, and (external SAN) McData Sphereon *4400, *4500, *4700 switches. Fibre Channel Redundant
