ページ1に含まれる内容の要旨
QuickSpecs
HP ProLiant DL160 Generation 5
Overview
Hot Plug SAS/SATA and Non-Hot Plug SATA Models
Front View: Rear View:
1. Access panel 1. Power Supply Cable Socket
2. Quad-Core Intel® Xeon® 5400 series processors 2. PS/2 Mouse Port
(supports up to two)
3. PS/2 Keyboard Port
3. Eight PC2-5300 (DDR2-667) or PC2-6400 (DDR2-800) 4. Two GbE LAN ports for NIC 1 and NIC 2 (RJ-45)
fully buffered DIMM memory slots
5. Rear USB ports
4. Power supply (650 Watts) 6. LO100i 10/100 Mbps LAN port for IPMI man
ページ2に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Overview Quad-Core Intel® Xeon® processors 5400 sequence with 12 MB Level 2 cache Dual-Core Intel® Xeon® processors 5200 sequence with 6 MB Level 2 cache Intel® 5400 Chipset Memory: Supports up to 64 GB of PC2-5300 (DDR2-667) and up to 32 GB of PC2-6400 (DDR2-800) fully buffered DIMMs (DDR2-667) with Advanced ECC Internal Drive Support: Support for up to four 3.5" Non-Hot plug serial ATA (SATA) hard drives or; Support for up to four 3.5" Hot plug Serial
ページ3に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Overview Deployment/Serviceability: Tool-less access to all system components for easy in rack serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic supp
ページ4に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA1-6954ENW.pdf NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor Quad-Core Intel® Xeon® processor X5482 (3.20 GHz, 120W, 1600MHz
ページ5に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Network Controller Two embedded NC105i PCIe Gigabit Server Adapters Expansion Slots # Technology Bus Width Connector Bus Device No.** Form Factor Notes Width* Number* PCI-Express x16 x16 1 0 Full length, 3.3 volts 1 2.0 full height PCI-X*** 64-bit N/A 5 1 Full length, 3.3 volts 1 full height PCI-Express x16 x16 6 3 Low Profile 3.3 volts 2 2.0 2 PCI-X*** 64-bit N/A 5 1 Low Profile 3.3 volts NOTE: All slots can accept universal keyed PCI
ページ6に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Interfaces Parallel None Network RJ-45(Ethernet) 2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out 100i Remote Management) Serial 1 Pointing Device (Mouse) 1 Graphics 1 Keyboard 1 USB 5 (two front, one internal, two rear) NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb- support.html. Graphics 32MB shared supporting 1600x1
ページ7に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features HP Systems Insight HP Systems Insight Manager (HP SIM) provides a unified, secure and Manager extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms. Core Infrastructure Subscriber's Choice Subscriber's Choice Driver and Support Alerts/Notifications is a web- Management based email subscription service that provides sof
ページ8に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Disaster Tolerant Solutions HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites Software u
ページ9に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (N
ページ10に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl160. Rack Support The DL Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36". Insta
ページ11に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Standard Features Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only Deployment Service – Hardware Installation only Enhanced Service – Optimize service level to increase IT performance and availability Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage Deployment Service – Installation and Start-up only Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Descri
ページ12に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 HPC Interconnects NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL160 G5 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or M
ページ13に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Models Non-Hot Plug Serial ATA (SATA) Models NOTE: Non-Hot Plug models are not upgradeable to Hot Plug. Non-Hot Plug models require the addition of the HP HBA SAS-SATA 4x1LN Cable Kit (P/N: 452130-B21) in order to connect a hardware RAID controller. HP DL160 G5 X5472 Processor(s) (1) Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600 Non-Hot Plug SATA, One of the following MHz FSB) 2GB, (1P) depending on model (1) Quad-Core Intel® Xeon® process
ページ14に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Models Country Code Key xx = 00 U.S. xx = 20 Brazil (P/N 445202-201 only) xx = 29 Japan xx = 37 APD xx = 42 Euro xx = AA PRC DA - 12902 Worldwide QuickSpecs — Version 19 — 1/26/2009 Page 14
ページ15に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO C
ページ16に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models Quad-Core Intel® Xeon® processor X5472 (3.00 GHz, 120W, 1600MHz FSB), 462465-L21 FIO NOTE: If 2 processors are desired, select one 462465-L21 and one 462465- B21. Quad-Core Intel® Xeon® processor X5470 (3.33 GHz, 120W, 1333MHz FSB), 495612-L21 FIO NOTE: If 2 processors are desired, select one 495612-L21 and one 495612- B21. Quad-Core Intel® Xeon® processor X5460 (3.16 GHz, 120W, 1333MHz FSB), 446085-L
ページ17に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models Memory 1 GB FBD PC2-5300 2 X 512 MB Kit 397409-B21 2 GB FBD PC2-5300 2 X 1 GB Kit 397411-B21 4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 8 GB FBD PC2-5300 2 X 4 GB Kit 397415-B21 Dual Rank 4 GB FBD PC2-6400 800MHz 2 x 2 GB Dual Rank Kit 484060-B21 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit 495604-B21
ページ18に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Configuration Information - Factory Integrated Models NOTE: This option is required for any internal port HBA or controller that has a standard 4 port SAS/SATA connector. Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted) Power Supply HP High Efficiency Power Supply Kit, FIO 453650-B21 NOTE: Selection of the HE Power Supply Unit will remove the 650 Watt standard power supply and requ
ページ19に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Options Server Management NOTE: Electronic licensing options are available for Insight Control suites and Stand Alone Software select ProLiant Essentials software products. Please see the appropriate Insight Product and ProLiant Control and ProLiant Essentials QuickSpecs for additional information. Essentials Control Lights-Out 100i Advanced Pack HP Lights Out 100i Advanced Pack, No Media, 1-Server License 455342-B21 NOTE: Supports HP ProLiant DL 160
ページ20に含まれる内容の要旨
QuickSpecs HP ProLiant DL160 Generation 5 Options Memory 1 GB FBD PC2-5300 2 X 512 MB Kit 397409-B21 2 GB FBD PC2-5300 2 X 1 GB Kit 397411-B21 4 GB FBD PC2-5300 2 X 2 GB Kit 397413-B21 8 GB FBD PC2-5300 2 X 4 GB Kit 397415-B21 Dual Rank 4 GB FBD PC2-6400 2 X 2 GB Dual Rank Kit 484060-B21 8 GB FBD PC2-6400 2 x 4 GB Dual Rank Kit 484062-B21 16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit 413015-B21 64 GB FBD PC2-5300 8 x 8 GB Dual Rank Kit 495604-B21 Low Power 2 GB FBD PC2-5300 2 X 1 GB Low Power Kit
