ページ1に含まれる内容の要旨
16
HP Vectra VLi 8 PC
Models and Accessories
1
Product Hard Video Std. Multi-media LAN OS
Number Drive Controller RAM
Vectra VLi 8 PC
Models with Intel Pentium II Processor,
100MHz System Bus Speed, and 512 KB Level 2 Cache Memory
HP Vectra VLi 8 PC 400/100 (CPL: 03/99 )
D7941A/T 6.4 GB Integrated 64 MB no no W95
IDE Matrox SDRAM
D7942A/T 3COM NT
MGA-G200 AGP 100 MHz
3C905B- 4.0
(8 MB SGRAM
TX WS
fitted, not
D7943A/T 8.4 GB 32 5 Max IDE no W95
upgradeable)
IDE CD-ROM
D7944T 6.4 GB no NT
ID
ページ2に含まれる内容の要旨
HP Vectra VLi 8 PC 1 Product Hard Video Std. Multi-media LAN OS Number Drive Controller RAM HP Vectra VLi 8 PC 500/100 (CPL: 03/99 ) D7961A/T 6.4 GB Integrated 64 MB no no W95 IDE Matrox SDRAM D7962A/T 3COM NT MGA-G200 AGP 100 MHz 3C905B- 4.0 (8 MB SGRAM TX WS fitted, not D7963A/T 8.4 GB 32 5 Max IDE no W95 upgradeable) IDE CD-ROM Vectra VLi 8 PC Models with User Defined Processor, Main Memory, and Hard Disk 2 HP Vectra VLi 8 PC /xxx (CPL: 03/99 ) D7950E User Integrated User User defined Use
ページ3に含まれる内容の要旨
HP Vectra VLi 8 PC Input Devices HP Standard Keyboard C4735A HP Scrolling Mouse C4736A Video Displays All current HP Displays (see the HP Vectra Accessory Service Handbook) Mass Storage 4.3-GB IDE hard disk D8371A 6.4-GB IDE hard disk D8372A 8.4-GB IDE hard disk D8373A HP 100 MB Atapi II Iomega ZIP drive D6650A HP 100 MB Atapi II Iomega ZIP drive (pack of 10) D6651A Multimedia 325 Max IDE CD-ROM drive (pack of 10) D6656A 325 Max IDE CD-ROM drive D4384A Multimedia sound accessory kit (16-bit audi
ページ4に含まれる内容の要旨
HP Vectra VLi 8 PC System Board, BIOS, and Memory System Board Switches: See the table on the next page. 16 Main Memory: Processor: Pentium II Two DIMM sockets which support or Pentium III SECC2 up to a maximum of 512 MB. package with integrated Install 32 MB, 64 MB, 128 MB or heatsink and level-2 256 MB 100 MHz SDRAM modules. cache memory. Medium-Profile 16-4 HP Vectra VLi 8 PC Desktop Vectras
ページ5に含まれる内容の要旨
HP Vectra VLi 8 PC System Board Switches Switch Function Default 1— RESERVED — Do Not Use Off On Crash recovery mode: forces booting in the BIOS boot block area 2 Off Off Normal operation On Normal operation (keyboard space-bar power-on enabled) 3 On Off Disables keyboard power- on On Clears User and Administrator passwords 4 Off Off Normal operation On Clears CMOS (to reload the Setup program defaults) 5 Off Off Normal operation 6-9 — Processor frequency, see the following table — 10 — RESERV
ページ6に含まれる内容の要旨
HP Vectra VLi 8 PC Part Numbers a k o g j h f n i m l b d c e 1 16 8 6 2 5 10 9 3 7 12 11 4 Medium-Profile 16-6 HP Vectra VLi 8 PC Desktop Vectras
ページ7に含まれる内容の要旨
HP Vectra VLi 8 PC Parts List for HP Vectra VLi 8 PC Item Description Repl. Exchange Part Number Part Number 1 Box assembly: 5064-9152 — a Cover assembly 5064-7470 — b Bezel assembly 5064-7471 — c Status panel assembly 5064-9129 — d Blank filler (5.25 inch) 5042-3073 — e Blank filler (3.5 inch) 5042-3086 — f CD frame rail 5002-6213 — g I/O blank panel 5002-3841 — hI/O locker 5002-4795 — i AGP blank panel 5002-6211 — j HDD, FDD and CD-ROM cable kit 5064-9135 — k Master key lock 5064-2645 — l Powe
ページ8に含まれる内容の要旨
HP Vectra VLi 8 PC System Board Parts List for HP Vectra VLi 8 PC Description Repl. Exchange Part Number Part Number System board: Vectra VLi 8 system board with Matrox — D4066-69001 MGA-G200 video controller and audio subsystem Processors (SECC2 package): Intel Pentium II 400/100 512KB L2 cache — D7645-69001 Intel Pentium III 450/100 512KB L2 cache — D7946-69001 Intel Pentium III 500/100 512KB L2 cache — D7957-69001 Main memory modules: 1 5 64-MB, 100 MHz noon-ECC SDRAM D6502-63001 — Manuals a
ページ9に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Removing and Replacing the Cover Removing and Replacing the Cover Removing the Cover 1 Switch off the monitor and PC, disconnect all power cords and any telecommunication cables. 2 If necessary, unlock the cover (with the key) at the rear of the PC. 3 Open the rear catches ˚ and remove the cover ¸ . ¸ ˚ ˚ 4 Remove the front panel. 51
ページ10に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Removing and Replacing the Cover Replacing the Cover 1 Ensure that all internal cables are properly connected and safely routed. 2 Replace the front panel. 3 Lower the cover and slide it into position. 4 If required, lock the cover (with the key) at the rear of the PC. 52
ページ11に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC The Label Inside Your PC The Label Inside Your PC Inside, your PC contains a label that can be used as a simplified guide to help you install accessories and replace components. Shows how to remove Shows how to the system board remove the hard (step 1 does not apply to disk drive your PC model) Shows how to add an accessory board Shows how to remove the floppy drive Shows how to remove the front drive bay 53
ページ12に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading the Main Memory Upgrading the Main Memory NOTE Use only HP memory modules provided for your PC model. The use of other memory modules is not supported. For information about supported HP accessories, connect to the web site www.hp.com/go/vectraaccessories. You can install up to a total of 512 MB (two 256 MB modules). Main memory is available in 100 MHz modules of 32 MB, 64 MB, 128 or 256 MB. (Although the 256 MB memory m
ページ13に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices Upgrading and Installing Mass Storage Devices Drive Connectors Internal drives, such as hard disk drives, DVD drives, and CD-ROM drives, must be connected to data and power cables. When replacing these drives, ensure you use the correct data and power connectors. (you can use Master (boot) hard disk drive CD-ROM, DVD or Zip drive either connector) 2nd hard disk drive Floppy drive Power
ページ14に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices Which Data Connectors There are three data cables inside your PC. Two of these are for IDE devices. to Use • An Enhanced Ultra ATA IDE (Integrated Drive Electronics) hard disk drive cable. For optimum performance, use this cable to connect the Ultra ATA IDE hard disk drive. • A second IDE drive cable that supports two IDE devices. If you install a CD-ROM drive, a DVD drive or a Zip dri
ページ15に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices Upgrading the Hard Disk Drive CAUTION Handle the hard disk drive with care. Avoid shocks and violent movement as this can cause damage to the hard disk drive’s internal components. Make sure that you back up your files before you install a hard disk drive. Refer to your operating system documentation for information on how to do this. You can replace your PC’s hard disk drive with a lar
ページ16に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices 5 Align the new hard drive in the tray (with the correct orientation) and tighten the screws. 6 Replace the drive tray ˚ and retaining screw ¸ . ˚ ¸ 7 Attach the data and power connectors. 8 Replace the cover (described in this chapter). 9 Verify the new configuration by checking the HP Summary Screen. To access the HP Summary Screen, press Esc when the Vectra logo appears during star
ページ17に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices Installing a Second Hard Disk Drive CAUTION Handle the hard disk drive with care. Avoid shocks and violent movement as this can cause damage to the hard disk drive’s internal components. Make sure that you back up your files before you install a hard disk drive. Refer to your operating system documentation for information on how to do this. You can install a second hard disk drive in th
ページ18に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices 5 Slide the drive bay back into the PC (ensuring the bottom catches engage properly) and replace the sliding latch. ¸ ˚ 6 Attach all data and power connectors. 7 Replace the cover (described in this chapter). 8 Verify the new configuration by checking the HP Summary Screen. To access the HP Summary Screen, press Esc when the Vectra logo appears during startup. NOTE Ensure that you have
ページ19に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices Installing Removable Media Devices The PC has an integrated Enhanced IDE controller which supports up to four IDE devices. Removable media IDE devices, such as CD-ROM drives, DVD drives, tape drives and Zip drives, require front access. You can install a removable media IDE drive in an empty front shelf. Refer to the drive’s manual to see if you must set jumpers or if there is a specia
ページ20に含まれる内容の要旨
2 How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices 5 Slide the drive bay back into the PC (ensuring the bottom catches engage properly) and replace the sliding latch. ¸ ˚ 6 Attach all data and power connectors. If you are installing a CD-ROM or DVD drive, connect the audio cable too. Audio Connector (optional) 7 Replace the cover (described in this chapter). 8 Verify the new configuration by checking the HP Summary Screen. To access th
