ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
PCI-CTR05 9513-Based Counter/Timer User's Guide Document Revision 4, December, 2005 © Copyright 2005, Measurement Computing Corporation
ページ3に含まれる内容の要旨
Your new Measurement Computing product comes with a fantastic extra — Management committed to your satisfaction! Refer to www.mccdaq.com/execteam.html for the names, titles, and contact information of each key executive at Measurement Computing. Thank you for choosing a Measurement Computing product—and congratulations! You own the finest, and you can now enjoy the protection of the most comprehensive warranties and unmatched phone tech support. It’s the embodiment of our two missions:
ページ4に含まれる内容の要旨
Trademark and Copyright Information Measurement Advantage brand, TracerDAQ, Universal Library, InstaCal, Harsh Environment Warranty, Measurement Computing Corporation, and the Measurement Computing logo are either trademarks or registered trademarks of Measurement Computing Corporation. SoftWIRE is a registered trademark of SoftWIRE Technology, Inc. Windows, Microsoft, and Visual Studio are either trademarks or registered trademarks of Microsoft Corporation LabVIEW is a trademark of Natio
ページ5に含まれる内容の要旨
Table of Contents About this User's Guide .......................................................................................................................v What you will learn from this user's guide .........................................................................................................v Conventions in this user's guide........................................................................................................................................ v Where to f
ページ6に含まれる内容の要旨
Preface About this User's Guide What you will learn from this user's guide This user's guide explains how to install, configure, and use the PCI-CTR05 so that you get the most out of it’s counter features. This user's guide also refers you to related documents available on our web site, and to technical support resources. Conventions in this user's guide For more information on … Text presented in a box signifies additional information and helpful hints related to the subject matter
ページ7に含まれる内容の要旨
PCI-CTR05 User's Guide About this User's Guide Where to find more information The following electronic documents provide helpful information relevant to the operation of the PCI- CTR05. MCC's Specifications: PCI-CTR05 (the PDF version of Chapter 4 in this guide) is available on our web site at www.mccdaq.com/pdfs/pci-ctr05r3.pdf. Rev 2 hardware specifications The specifications for hardware up to revision 2 are available on our web site at www.mccdaq.com/pdfs/pci-ctr05.pdf. MCC's Regis
ページ8に含まれる内容の要旨
Chapter 1 Introducing the PCI-CTR05 The PCI-CTR05 is a high-performance, low-cost counter/timer board for PCI bus-compatible computers. The PCI-CTR05 is based on the 9513 counter/timer device. The PCI-CTR05 has one 9513 counter/timer device. The 9513 device has five independent 16-bit counters (65,536 counts). Each counter has an input source, count register, load register, hold register, alarm register, output, and gate associated with each counter. The 9513 is software-programmable
ページ9に含まれる内容の要旨
PCI-CTR05 User's Guide Introducing the PCI-CTR05 Block diagram The block diagram shown here illustrates the functionality of the PCI-CTR05. AMD9513 (equivalent) 16-bit counters Input Clock0 Gate0 Counter 0 1.0/1.67/3.3/5.0 MHz Output Clock0 Input Clock1 Gate1 Counter 1 Output Clock1 Input Clock2 Counter 2 Gate2 Output Clock2 Input Clock3 Counter 3 Gate3 Output Clock3 Input Clock4 Counter 4 Gate4 Output Clock4 Controller FPGA and Logic Clock Select Digital I/O Control 10 MHz Control Clock Bus
ページ10に含まれる内容の要旨
Chapter 2 Installing the PCI-CTR05 What comes with your PCI-CTR05 shipment? As you unpack your board, make sure that the following components are included. Hardware PCI-CTR05 Software The Measurement Computing Data Acquisition Software CD contains the following software: InstaCal installation, calibration, and test utility TracerDAQ suite of virtual instruments SoftWIRE for VS .NET (evaluation version) Documentation In addition to this hardware user's guide, you should also
ページ11に含まれる内容の要旨
PCI-CTR05 User's Guide Installing the PCI-CTR05 Optional components If you ordered any of the following products with your board, they should be included with your shipment. Cables C37FF-x C37FFS-x Signal termination and conditioning accessories MCC provides signal termination and signal conditioning products for use with the PCI-CTR05. Refer to Field wiring, signal termination and conditioning for a complete list of compatible accessory products. Unpacking the board The PCI-CTR05
ページ12に含まれる内容の要旨
PCI-CTR05 User's Guide Installing the PCI-CTR05 Installing the hardware The PCI-CTR05 board is completely plug-and-play, with no switches or jumpers to set. Configuration is controlled by your system's BIOS. To install your board, follow the steps below. Install the MCC DAQ software before you install your board The driver needed to run your board is installed with the MCC DAQ software. Therefore, you need to install the MCC DAQ software before you install your board. Refer to the Quick St
ページ13に含まれる内容の要旨
PCI-CTR05 User's Guide Installing the PCI-CTR05 1 IRQ INPUT PC +5V 20 IRQ ENABLE 2 DIN STROBE 21 3 DOUT7 DIN7 22 DOUT6 4 DIN6 23 DOUT5 5 DIN5 24 6 D4 OUT DIN4 25 7 D3 OUT DIN3 26 8 D2 OUT DIN2 27 9 D1 OUT 28 DIN1 10 D0 OUT DIN0 29 11 GND OSC OUT 30 12 CTR5GATE CTR5OUT 31 13 CTR5CLK CTR4OUT 32 14 CTR4GATE CTR3OUT 33 15 CTR4CLK 34 CTR2OUT 16 CTR3GATE CTR1OUT 35 17 CTR3CLK CTR1CLK 36 18 CTR2GATE 37 CTR1GATE 19 CTR2CLK J1 Figure 2-1. Boa
ページ14に含まれる内容の要旨
PCI-CTR05 User's Guide Installing the PCI-CTR05 1 1 20 20 37 37 19 19 Figure 2-3. C37FFS-x cable Field wiring, signal termination and conditioning You can use the following MCC screw terminal boards with the PCI-CTR05 board using the C37FF-x or C37FFS-x cable. SCB37 — 37-conductor, shielded signal connection/screw terminal box that provides two independent 37-pin connections. Details on this product are available at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1166. CIO
ページ15に含まれる内容の要旨
Chapter 3 Programming and software applications Programming languages Measurement Computing’s Universal Library™ provides access to board functions from a variety of Windows programming languages. If you are planning to write programs, or would like to run the example programs for Visual Basic or any other language, please refer to the Universal Library User's Guide (available on our web site at www.mccdaq.com/PDFmanuals/sm-ul-user-guide.pdf). Packaged application programs Many pac
ページ16に含まれる内容の要旨
Chapter 4 Specifications Typical for 25 °C unless otherwise specified. Specifications in italic text are guaranteed by design. The counter frequency sources and 3.3 V compatibility apply to hardware manufactured at revision 3 and later The clock input frequency sources and compatibility with a 3.3 V signaling environment that are listed in this specification apply to hardware built at revision 3 and later. Digital input / output Table 4-1. Digital I/O specifications Digital type
ページ17に含まれる内容の要旨
PCI-CTR05 User's Guide Specifications Counter Refer to the CTS9513-2 data sheet for complete 9513 specifications and operating modes. The SAVE command for the CTS9513 device does not behave predictably when using clocks which are not synchronous with the logic timing. The CTS9513-2 data sheet is available on our web site at www.mccdaq.com/PDFmanuals/9513A.pdf. Table 4-3. Counter specifications Parameter Conditions Counter type 9513 Configuration One 9513 device. Five up/down counters,
ページ18に含まれる内容の要旨
PCI-CTR05 User's Guide Specifications Parameter Conditions Input low voltage -0.5 V min, 0.8V max Input high voltage 2.2 V min, Vcc max Output low voltage @ IIl=3.2 mA 0.4 V max Output high voltage @ IIH= -200 uA 2.4 V min Crystal oscillator frequency 10 MHz Frequency accuracy 50 ppm Power consumption Table 4-4. Power consumption specifications +5 V 307 mA typical, 549 mA max. Does not include power consumed through the I/O connector. +5 V available at connector 1 A max Environmen
ページ19に含まれる内容の要旨
PCI-CTR05 User's Guide Specifications J1 Table 4-8. Main connector J1 pin out Pin Signal Name 1 IRQ INPUT 2 IRQ ENABLE 3 DOUT7 4 DOUT6 5 DOUT5 6 DOUT4 7 DOUT3 8 DOUT2 9 DOUT1 10 DOUT0 11 GND 12 CTR5GATE 13 CTR5CLK 14 CTR4GATE 15 CTR4CLK 16 CTR3GATE 17 CTR3CLK 18 CTR2GATE 19 CTR2CLK 20 PC +5V 21 DIN STROBE 22 DIN7 23 DIN6 24 DIN5 25 DIN4 26 DIN3 27 DIN2 28 DIN1 29 DIN0 30 OSC OUT 31 CTR5OUT 32 CTR4OUT 33 CTR3OUT 34 CTR2OUT 35 CTR1OUT 36 CTR1CLK 37 CTR1GAT
ページ20に含まれる内容の要旨
EC Declaration of Conformity We, Measurement Computing Corporation, declare under sole responsibility that the product PCI-CTR05 5-counter board for the PCI bus Part Number Description to which this declaration relates, meets the essential requirements, is in conformity with, and CE marking has been applied according to the relevant EC Directives listed below using the relevant section of the following EC standards and other informative documents: EU EMC Directive 89/336/EEC: Essenti
