ページ1に含まれる内容の要旨
NuIPC
cPCI-6760DK/P5
6U CompactPCI Highly Integrated Single Slot
Dual Bridge Low Power Pentium-III CPU Module
User’s Guide
Recycled Paper
ページ2に含まれる内容の要旨
© Copyright 2001 ADLINK Technology Inc. All Rights Reserved. Manual Rev. 1.00: September 9, 2002 Part No. 50-15008-100 The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or doc
ページ3に含まれる内容の要旨
Getting service from ADLINK • Customer Satisfaction is the most important priority for ADLINK Tech Inc. If you need any help or service, please contact us. ADLINK Technology Inc. Web Site http://www.adlinktech.com Sales & Service Service@adlinktech.com NuDAQ + USBDAQ nudaq@adlinktech.com Technical Automation automation@adlinktech.com Support NuIPC nuipc@adlinktech.com NuPRO / EBC nupro@adlinktech.com TEL +886-2-82265877 FAX +886-2-82265717 Address 9F, No. 166, Jian Yi Road, Chungho C
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Table of Contents List of Tables ...................................................................................... iii Chapter 1 Introduction........................................................................ 1 1.1 Checklist...................................................................................................1 1.2 Description ...............................................................................................3 1.3 Features ..................................
ページ6に含まれる内容の要旨
Chapter 3 Getting Started................................................................. 29 3.1 CPU Installation..................................................................................... 30 3.2 Memory Installation ............................................................................... 30 3.3 CF Installation ....................................................................................... 31 3.3.1 DB-6760CF Outline, Jumper and Connectors ......................... 32
ページ7に含まれる内容の要旨
List of Tables Table 1: cPCI-6760DK/P5 functional table ................................................3 Table 2: Peripheral Connectivity for cPCI-6760DK....................................9 Table 3: JP1 Clear CMOS content...........................................................17 Table 4: Keyboard/Mouse Combo Connector (CN4) on cPCI-6760DK/P5 front board .....................................................17 Table 5: Ethernet Connector LAN1 (CN6) and LAN2 (CN7) on cPCI-6760DK/P5 fr
ページ8に含まれる内容の要旨
ページ9に含まれる内容の要旨
1 Introduction This manual is designed to give you information on the cPCI-6760DK/P5 single board computer module. The topics covered in this chapter are as follows: • Checklist • Descriptions • Features • Specifications • Functional block diagram • Mechanical outline drawing 1.1 Checklist The default version of cPCI-6760DK/P5 includes pre-installed 64MB RAM and CF card socket. However, the CPU module may be equipped with different capacity of RAM or HDD by request. Please check
ページ10に含まれる内容の要旨
• One DB-6760CF removable CompactFlash socket adaptor (which is pre-mounted on the CPU module for the standard configuration delivery. The DB-6760CF may not be included if customer request pre-configuring 2.5” ATA HDD or by OEM project request.) • Y cable for PS/2 keyboard and mouse connection. (P/N: 30-01016-000) • This User’s Manual • ADLINK CD Note: The delivery package of the cPCI-6760DK/P5 OEM version (non-standard configuration, functionality, customized logo, modified faceplate
ページ11に含まれる内容の要旨
1.2 Description ADLINK’s cPCI-6760DK/P5 is a powerful and flexible CompactPCI host slot processor board based on the Intel BGA2 Mobile (or Low Voltage) Pentium III processor. This board is specially designed to add total system functional density to ADLINK’s 6U CompactPCI platform for CTI and Telecom applications. It is also suitable for clustering high-availability, high-density and high-reliability embedded applications where performance and a rich feature set are mandatory. The CPU m
ページ12に含まれる内容の要旨
1.3 Features • PICMG 2.0 CompactPCI Specification R.3.0 Compliant • PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant • Standard 6U form factor, 1-slot (4TE/HP) width • Pre-mounted low voltage BGA2 Pentium-III 500MHz CPU with 100MHz FSB • Pre-installed 64MB 144-pin SO-DIMM PC-100 RAM, support up to 512MB • Build-in housing for 2.5” low profile HDD • Supports up to 1 USB ports, 1 serial port, 1 parallel port, 1 floppy interface • Supports 14 bus-master PCI devices on Co
ページ13に含まれる内容の要旨
Chipset • Intel 440BX AGPset • Intel 82443BX and 82371EB(PIIX4E) BIOS: Award PnP BIOS • BIOS write protection, provide anti-virus capability • On-board Ethernet disable selectable • DMI BIOS Support: Desktop Management Interface (DMI) allows users to download system hardware-level information such as CPU type, CPU speed, internal/external frequencies and memory size. • Supports Intel pre-boot execution environment (PXE) for boot from LAN • Remote Console: setup console redirection to
ページ14に含まれる内容の要旨
On Board Super I/O • Winbond W83977EF • Supports high-speed bi-directional SPP/EPP/ECP parallel ports (DB-25 connector) on front panel with ESD protection to 4KV and downstream device protection to 30V. • One floppy interface by daughter board (DB-6760J3), support two floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB.) 34-pin floppy connector is available on DB-6760J3. • One 16C550 UARTs compatible RS-232 COM1 port with ESD protection to 2KV on front CPU module. USB Interface • Sup
ページ15に含まれる内容の要旨
Note: The 1600x1200 VGA display resolution is a non-standard configuration. It needs special modified BIOS with drivers, which can ONLY be supported under Windows NT operating system. The BIOS may cause incompatible issues with other OS. The standard BIOS can support resolutions up to 1280x1024 under all operating systems listed above. On-board Ethernet supporting • Two Ethernet ports featuring by two Intel 82559 Ethernet controller. • IEEE 802.3 10Base-T and 100Base-TX compatible •
ページ16に含まれる内容の要旨
Environment (Note) • Operating temperature: 0 to 60°C • Storage temperature: -20 to 80°C • Humidity: 5% to 95% non-condensed • Shock: 15G peak-to-peak, 11ms duration, non-operation • Vibration: ü Non-operation: 1.88Grms, 5-500Hz, each axis ü Operation: 0.5Grms, 5-500Hz, each axis, with 2.5” HDD Note: 1. System forced cooling airflow with minimum 5 CFM is required for cPCI-6760DK/P5 2. Due to environmental limitation differences from one component to another; please refer to the com
ページ17に含まれる内容の要旨
1.4.2 Peripheral Connectivity for cPCI-6760DK/P5 Peripheral Connectivity for cPCI-6760DK/P5 Front (cPCI-6760DK/P5) I/O Faceplate Board Serial Port (COM1) Y (DB-9) --- Parallel Port (via DB-6760J3) Y (DB-25) --- PS/2 Keyboard and Mouse Y (PS/2) --- Floppy (via DB-6760J3) --- Y (34-pin) Ultra DMA 33 Primary EIDE --- Y (40-pin) (Via DB-6760J3) Ultra DMA 33 Secondary EIDE --- Y (44-pin) USB A Y --- 10/100Mb Ethernet Port 1 Y (RJ-45) --- 10/100Mb Ethernet Port 2 Y (RJ-45) --- VGA Y (
ページ18に含まれる内容の要旨
1.5 Functional Block Diagram Low Power Mobile CPU Host Bus 100MHZ SO-DIMM 440 BX SMI721 AGP BUS Memory BUS 66MHZ 100MHZ P PCI Bus 33MHZ M I C D E PIIX4E INTEL BRIDGE 82559 PCI2050 U S B ISA Bus 16MHZ HWM BIOS W83782D Super I/O PRT MS KB COM FDD 10 · Introduction
ページ19に含まれる内容の要旨
1.6 Mechanical outline drawing 1.6.1 Outline drawing for cPCI-6760DK/P5 CPU board Introduction · 11
ページ20に含まれる内容の要旨
2 Jumpers and Connectors This chapter provides information on how to use the jumpers and connectors on the cPCI-6760DK/P5 in order to set up a workable system. We also describe the meaning of each LED indicator. The topics covered are: • Jumpers, Connectors and LED indicators on the cPCI-6760DK/P5 12 • Jumpers and Connectors
