ページ1に含まれる内容の要旨
TI5VG
Pentium VP3 ATX Motherboard
User’s Manual
Version 1.0A
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Contents Contents Chapter 1 Introduction.................................................... 1 Chapter 2 Specifications .................................................. 2 Chapter 3 Hardware Description ................................... 4 3.1 Processor and CPU Voltage ..............................................6 3.2 L2 Cache Memory.............................................................6 3.3 Main Memory....................................................................
ページ4に含まれる内容の要旨
Contents Chapter 6 BIOS Configuration..................................... 30 6.1 BIOS Introduction ...........................................................33 6.2 BIOS Setup ......................................................................33 6.3 Standard CMOS Setup.....................................................35 6.4 BIOS Features Setup .......................................................38 6.5 Chipset Features Setup ................................................
ページ5に含まれる内容の要旨
Chapter 1 Introduction Chapter 1 Introduction This manual is designed to give you information on the TI5VG Motherboard. It is divided into the following sections: • • • • Introduction • • Specifications • • • • • • Hardware Description • • • • Hardware Settings • • • • Installation • • • • BIOS Configuration • • • • LANDesk User Guide Checklist Please check that your package is complete and contains the items below. If you discover damaged or missing items, ple
ページ6に含まれる内容の要旨
Chapter 2 Specifications Chapter 2 Specifications Based on VIA’s VP3 chipset, the TI5VG is a ATX Pentium motherboard that supports all the features to make a Microsoft PC’97 compliant PCI/ISA system. This high performance model comes with an Accelerated Graphics Port (AGP) slot, power management functionality that is compliant with ACPI (Advanced Configuration and Power Interface) and legacy APM requirements. In addition to standard PIO and DMA mode operation, the TI5VG features Ul
ページ7に含まれる内容の要旨
Chapter 2 Specifications Onboard Bus Mastering EIDE Two EIDE interfaces for up to four devices, support PIO Mode 3/4 or Ultra DMA/33 IDE Hard Disk and ATAPI CD-ROM. BIOS Licensed BIOS with additional features: • FLASH EEPROM (128KB) for BIOS update • ISA Plug and Play (PnP) extension • Power management Hardware Monitoring (optional) Monitoring for system temperature, system voltage and fan speed. The monitoring status are shown in the BIOS. Windows 95 Shut-Down This
ページ8に含まれる内容の要旨
Chapter 3 Hardware Description Chapter 3 Hardware Description This chapter briefly describes each of the major features of the TI5VG motherboard. The layout of the board is shown in Figure 1 which shows the locations of the key components. The topics covered in this chapter are as follows: 3.1 Processor and CPU Voltage ........................................................6 3.2 L2 Cache Memory.......................................................................6 3.3 Main M
ページ9に含まれる内容の要旨
Chapter 3 Hardware Description Figure 1: Layout of the TI5VG Motherboard TI5VG Pentium VP3 ATX Motherboard User’s Manual 5
ページ10に含まれる内容の要旨
Chapter 3 Hardware Description 3.1 Processor and CPU Voltage The TI5VG is designed to take a Pentium Processor with a bus speed of 60 and 66 MHz. The internal clock of the CPU can be multiples of 1.5, 2, 2.5, 3, 3.5, 4 and 4.5 of the bus clock, the CPU frequency can be 90 to 300MHz. The onboard CPU voltage regulator provides support for CPUs Vcore which require voltage other than 3.3V such as 2.8V, and/or power consumption higher than 10 watts. 3.2 L2 Cache Memory The TI5V
ページ11に含まれる内容の要旨
Chapter 3 Hardware Description (1) 72Pin SIMM (5V) EDO DRAM Bank0 Bank1 Total Memory (SIMM1, SIMM2) (SIMM3, SIMM4) ----- 8MB 4MB×2 ----- 16MB 8MB×2 ----- 32MB 16MB×2 32MB×2 ----- 64MB 64MB×2 ----- 128MB 4MB×2 4MB×2 16MB 8MB×2 4MB×2 24MB 16MB×2 4MB×2 40MB 72MB 32MB×2 4MB×2 136MB 64MB×2 4MB×2 32MB 8MB×2 8MB×2 48MB 16MB×2 8MB×2 80MB 32MB×2 8MB×2 144MB 64MB×2 8MB×2 64MB 16MB×2 16MB×2 32MB×2 16MB×2 96MB 64MB×2 16MB×2 160MB 32MB×2 32MB×2 128MB 64MB×2 32MB×2 192MB
ページ12に含まれる内容の要旨
Chapter 3 Hardware Description (2) 168Pin DIMM (3.3V) SDRAM or EDO DRAM Bank0 Bank1 Bank2 Total Memory (DIMM3) (DIMM2) (DIMM1) 8MB ----- ----- 8MB 16MB ----- ----- 16MB 32MB ----- ----- 32MB 64MB ----- ----- 64MB 128MB ----- ----- 128MB 8MB 8MB ----- 16MB 16MB 8MB ----- 24MB 32MB 8MB ----- 40MB 64MB 8MB ----- 72MB 128MB 8MB ----- 136MB 8MB 8MB 8MB 24MB 16MB 8MB 8MB 32MB 32MB 8MB 8MB 48MB 64MB 8MB 8MB 80MB 128MB 8MB 8MB 144MB 16MB 16MB ----- 32MB 32MB 16MB ----- 48MB 64MB
ページ13に含まれる内容の要旨
Chapter 3 Hardware Description 168Pin DIMM (3.3V) (continued) SDRAM or EDO DRAM Bank0 Bank1 Bank2 Total Memory (DIMM3) (DIMM2) (DIMM1) 64MB 32MB 16MB 112MB 128MB 32MB 16MB 176MB 32MB 32MB 32MB 96MB 64MB 32MB 32MB 128MB 128MB 32MB 32MB 192MB 64MB 64MB ----- 128MB 128MB 64MB ----- 192MB 64MB 64MB 8MB 136MB 128MB 64MB 8MB 200MB 64MB 64MB 16MB 144MB 128MB 64MB 16MB 208MB 64MB 64MB 32MB 160MB 128MB 64MB 32MB 224MB 64MB 64MB 64MB 192MB 128MB 64MB 64MB 256MB 128MB 128MB 128MB
ページ14に含まれる内容の要旨
Chapter 3 Hardware Description 3. Power Management The power management feature provides power savings by slowing down the CPU clock, turning off the monitor screen and stopping the HDD spindle motor. 3.5 Onboard PCI EIDE The PCI EIDE controller is part of the VP3 chipset. It supports PIO mode 3/4 and bus mastering . The peak transfer rate of PIO mode 3/4 can be as high as 17MB/sec. Using HDDs that support bus mastering, the peak transfer rate can reach 22MB/sec. There are two
ページ15に含まれる内容の要旨
Chapter 3 Hardware Description 3.8 I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. There are a total of 1K port address space available. The following table lists the I/O port addresses used on the motherboard. Address Device Description 000h - 01Fh DMA Controller #1 020h - 03Fh Interrupt Controller #1 040h - 05Fh Timer 060h - 06Fh Keyboard Controller 070h - 07Fh Real Time Clock,
ページ16に含まれる内容の要旨
Chapter 3 Hardware Description 3.10 Interrupt Request Lines (IRQ) There are a total of 15 IRQ lines available on the motherboard. Peripheral devices use interrupt request lines to notify the CPU for the service required. The following table shows the IRQ used by the devices on the motherboard. Level Function IRQ0 System Timer Output IRQ1 Keyboard IRQ2 Interrupt Cascade IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ5 Parallel Port #2 IRQ6 Floppy Disk Controller IRQ7 Parallel Port
ページ17に含まれる内容の要旨
Chapter 4 Hardware Settings Chapter 4 Hardware Settings The following sections describe the necessary procedures and proper jumper settings to configure the TI5VG motherboard. 4.1 SW1(1-7): CPU Frequency Selector .........................................15 4.2 SW2(1-4): CPU Voltage Selector .............................................17 4.3 JP8: Clear CMOS Selection......................................................19 For the locations of the jumpers, refer to Figure 2
ページ18に含まれる内容の要旨
Chapter 4 Hardware Settings Figure 2: Jumper Locations of the TI5VG 14 TI5VG Pentium VP3 ATX Motherboard User’s Manual
ページ19に含まれる内容の要旨
Chapter 4 Hardware Settings 4.1 SW1(1-7): CPU Frequency Selector For Intel Pentium CPU SW1 Bus Clock Multiplier CPU FREQ. 60MHz 1.5x P54C-90 on off off off off off off 66MHz 1.5x P54C-100 off off off off off off off 60MHz 2x P54C-120 on off off off on off off 66MHz 2x P54C-133 off off off off on off off 60MHz 2.5x P54C-150 on off off off on on off P54C/P55C-16 66MHz 2.5x 6 off off off off on on off P54C/P55C-20 66MHz 3x 0 off off off off o
ページ20に含まれる内容の要旨
Chapter 4 Hardware Settings For Cyrix 6x86, 6x86L CPU SW1 Bus Clock Multiplier CPU FREQ. P150+ 60MHz 2x (120MHz) on off off off on off off P166+ 66MHz 2x (133MHz) off off off off on off off For Cyrix 6x86MX CPU SW1 Bus Clock Multiplier CPU FREQ. PR200 66MHz 2.5x (166MHz) off off off off on on off PR233 66MHz 3x (200MHz) off off off off off on off PR266 66MHz 3.5x (233MHz) off off off off off off off For AMD K5, K6 CPU SW1 Bus Clock Mu
