ページ1に含まれる内容の要旨
9V
1.0 A
VGA - +
VIDEO Aurora,Ohio 44202
1275 Danner Drive
Tel: 1-800-626-7801
Fax: 330-562-1999
PRODUCTS
www.vpi.us
VPI INCORPORATED
INSTALLATION GUIDE FOR THE
VGA-CMP
INTRODUCTION
The VPI VGA-CMP converts VGA video to component video.
INSTALLATION
1. Turn OFF power to video source and video display device.
2. Connect a VEXT-3-MM VGA video cable (sold separately) from the video source to the female connector labeled "VGA" on
the VGA-CMP.
3. Connect a set of CMPEXT-3-
ページ2に含まれる内容の要旨
TROUBLESHOOTING Problem Solution No Video • Connect power to VGA-CMP • Make sure cable connections are secure and in their appropriate places TECHNICAL SPECIFICATIONS General Description Specification Input Signal Type VGA, SVGA, XGA Input Signal Connector 15HD Female Output Signal Type High Definition Component Video Output Connectors 75 ohm RCA Female Max. Input Levels .7vp-p Max. Output Levels 1vp-p Input / Output Impedance 75 Ohms Maximum Resolution 1920 x 1080 Power 110 or 220VAC at 50
