ページ1に含まれる内容の要旨
Overview
Fan
Drive activity LED
pin connections
Standard height
mounting bracket
Addonics
Multilane 4x SATA
T E C H N O L O G I E S
interface
PCI-Express 8x
Multilane 4X RAID5/JBOD PCI-E 8x Controller
ADSA3GPX8-ML
To switch between RAID and non-RAID mode
The controller card comes with jumper pins that would allow you to switch
between RAID and non-RAID mode. The RAID mode means you can create
RAID volumes using the SATARAID5 array manager. The
ページ2に含まれる内容の要旨
Windows Software Installation for RAID mode Installing ADSA3GPX8-ML under Mac OSX. Note: Install the SATA Utilities from the CD that came with your package first Below are the instructions to install drivers for Mac OSX compatible SATA before installing the Host Controller. controllers which support RAID 0, 1, 10, 5, and JBOD. An internet connection A. From the CD start-up menu select SATA RAID Utilities. Select Model may be required to download the latest drivers from the Addonics web
ページ3に含まれる内容の要旨
3. Locate the downloaded driver and extract the contents. Double click on the extracted installer to begin the installation process. 4. Continue through the installation process, entering in your desired settings. 6. The Silicon Image SATARaid5 Manager has been installed at the same time When the installation process is finished, the RAID controller driver and RAID as the controller driver. software have been installed. A. The new folder containing the SATARaid5 Manager can be acce
ページ4に含まれる内容の要旨
B. Within this folder, click on "SATARaid5Manager" to execute the RAID creation Technical Support and management utility. If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time consuming and frustrating. Here are some tips to help you out: Contact Information Pho
