ページ1に含まれる内容の要旨
P5SD2-FM
Motherboard
ページ2に含まれる内容の要旨
E2471 First Edition V1 March 2006 Cop Cop Cop Cop Copyright © 2006 yright © 2006 yright © 2006 yright © 2006 yright © 2006 ASUST ASUST ASUST ASUST ASUSTeK COMPUTER INC eK COMPUTER INC eK COMPUTER INC eK COMPUTER INC eK COMPUTER INC..... All Rights R All Rights R All Rights R All Rights R All Rights Reser eser eser eser eserv v v v ved. ed. ed. ed. ed. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieva
ページ3に含まれる内容の要旨
Contents Notices ................................................................................................ vi Safety information ............................................................................. vii P5SD2-FM specifications summary ................................................ x Chapter 1: Product introduction 1.1 Before you proceed .............................................................. 1-2 1.2 Motherboard overview ....................................................
ページ4に含まれる内容の要旨
Contents Chapter 2: 2.1 BIOS setup 2.2 BIOS setup program ............................................................ 2-02 2.2.1 BIOS menu screen ................................................. 2-03 2.2.2 Menu bar ............................................................... 2-03 2.2.3 Navigation keys ..................................................... 2-03 2.2.4 Menu items ........................................................... 2-04 2.2.5 Sub-menu items ..............................
ページ5に含まれる内容の要旨
Contents 2.5 Power menu ........................................................................ 2-18 2.5.1 ACPI Aware ....................................................... 2-18 2.5.2 Suspend Modet ................................................. 2-18 2.5.3 Respost Video on S3 Resume ............................................... 2-18 2.5.4 ACPI 2.0 Support ................................................ 2-28 2.5.5 ACPI APCI Support .................................................. 2-18 2
ページ6に含まれる内容の要旨
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reaso
ページ7に含まれる内容の要旨
Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cabl
ページ8に含まれる内容の要旨
P5SD2-FM specifications summary ® ® ® CPU LGA775 socket for Intel Pentium D/Intel Pentium 4/Celeron processors ® Compatible with Intel Performance Universal FMB ® Supports Intel Hyper-Threading Technology ® Supports Intel Extreme Edition Northbridge: SiS 649DX Chipset Southbridge: SiS 966 800/533 MHz Front Side Bus 2 x 240-pin DIMM sockets support up to 2GB of Memory unbufferred non-ECC 667/533/400 MHz DDR2 DIMMs 1 x PCI Express x16 slot for discrete graphics cards Expansion 1 x PCI Express
ページ9に含まれる内容の要旨
P5SD2-FM specifications summary 4 x USB connectors Internal connectors 1 x CPU fan connector 1 x Chassis fan connector 1 x 24-pin EATX power connector 1 x 4-pin ATX 12 V power connector 1 x Internal audio connector 1 x Front panel audio connector 1 x S/PDIF out connector 1 x System panel connector Device drivers Support CD contents ASUS PC Probe II ASUS Live Update utility Form Factor uATX form factor: 9.6 in x 9.6 in *Specifications are subject to change without notice. 9
ページ10に含まれる内容の要旨
10
ページ11に含まれる内容の要旨
This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard. Hardware 1 information
ページ12に含まれる内容の要旨
1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity • Hold components by the edges to avoid touching the ICs on them. • Whenever you uninstall any
ページ13に含まれる内容の要旨
1.2 Motherboard overview Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Refer to the chassis documentation before installing the motherboard. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components. 1.2.1 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct
ページ14に含まれる内容の要旨
1.2.3 Motherboard layout 23.0 cm (9.0 in) CHA_FAN ATX12V CPU_FAN LGA775 SPDIF_O1 F_USB12 USBPW12 USBPW34 LAN_USB34 SiS REALTEK 649DX SPDIF_O2 PCIEX16 SATA2 VIA SATA4 PCI1 VT6307 4Mb SiS BIOS SATA1 966 PCI2 SATA3 CR2032 3V Lithium Cell CMOS Power PCIEX1_1 PWDSKP USBPW56 BIOSREC USBPW78 BUZZER ALC880 PLED SPEAKER AAFP CLRTC AUX IE1394_1 USB56 USB78 F_PANEL 1-4 Chapter 1: Hardware information COM1 AUDIO ® P5SD2-FM DDR2 DIMM1 (64 bit,240-pin module) DDR2 DIMM2 (64 bit,240-pin module) SEC_IDE Super I
ページ15に含まれる内容の要旨
1.2.4 Layout Contents Slots Page 1. DDR DIMM slots 1-14 2. PCI slots 1-20 3. PCI Express slot 1-20 Jumpers Page 1. Clear RTC RAM (CLRTC) 1-21 2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78) 1-22 Rear panel connectors Page 1. Serial port 1-23 2. IEEE 1394a port 1-23 3. LAN (RJ-45) port 1-23 4. Center/Subwoofer port 1-23 5. Side Speaker Out port 1-23 6. Line In port 1-23 7. Line Out port 1-23 8. Microphone port 1-23 9. Rear Speaker Out port 1-24 10. USB 2.0 ports 3 and 4 1-24 11.
ページ16に含まれる内容の要旨
Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 1-25 2. Power LED connector (3-1 pin PLED) 1-25 3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) 1-26 4. Serial ATA connectors (7-pin SATA1 [black], SATA2 [black]) 1-27 5. CPU and Chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) 1-28 6. Speaker out connector (4-pin SPEAKER) 1-28 7. USB connectors (10-1 pin USB56, USB78) 1-29 8. ATX power connector (24-pin EATXPWR, 4-pin ATX12V) 1-30 9. Internal audio connector (4-pin A
ページ17に含まれる内容の要旨
1.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the ® ® Intel Pentium 4 processor in the 775-land package. ® ® • Your boxed Intel Pentium 4 LGA775 processor package should come with installation instructions for the CPU, heatsink, and the retention mechanism. If the instructions in this section do not match the CPU documentation, follow the latter. • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socke
ページ18に含まれる内容の要旨
2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab A PnP cap Load lever B This side of the socket box should face you. To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forefinger to a 100º angle (A), B then push the PnP cap from the load plate window to rem
ページ19に含まれる内容の要旨
6. Close the load plate (A), then push A the load lever (B) until it snaps into the retention tab. B The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! ® Notes on Intel Hyper-Threading Technology ® ® • This motherboard supports Intel Pentium 4 CPUs in the 775-land package with Hyper-Threading Technology. ® • Hyper-Threading Technology is supported under Windows XP and Linux 2.4.x (kernel) and la
ページ20に含まれる内容の要旨
1.3.2 Installing the CPU heatsink and fan ® ® The Intel Pentium 4 LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. ® ® • When you buy a boxed Intel Pentium 4 processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, ® make sure that you use only Intel -certified multi-directional heatsink and fan. ® ® • Your Intel Pentium 4 LGA775 heatsink and fan assembly comes in a push- pin desig
