ページ1に含まれる内容の要旨
© Copyright September, 2005
This publication, including all photographs, illustrations and software, is
protected under international copyright laws, with all rights reserved. Neither
this manual, nor any of the material contained herein, may be reproduced
without written consent of Giga-byte Technology Co., Ltd.
The information in this document is subject to change without notice. The
manufacturer makes no representations or warranties with respect to
the contents hereof and specifically d
ページ2に含まれる内容の要旨
I FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications
ページ3に含まれる内容の要旨
II General Safety Information • Do not place heavy objects such as books or bags on the unit. • Avoid placing objects with strong magnets built in too close to the unit. If you suspect stereo speakers may interfere with the unit, try moving the speakers away from the unit. • Avoid using the system in direct sunlight, or near a heating device. • To prevent the unit from overheating, do not cover the air ventilation openings on the top, sides, or the rear. • Do not open the unit case. Do not
ページ4に含まれる内容の要旨
III Power Safety • Only use the supplied power cord. • Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. • Remove the batteries from the remote control when storing or not in use for a prolonged period. • Before connecting power to the HA91, make sure the power source is within the range of AC 100~240V, 50~60 Hz. HDD Partition: It is strongly recommend not to partitioning the hard disk. Manual Styles The following styles are used i
ページ5に含まれる内容の要旨
CONTENTS IV CONTENTS Chapter One Getting Started 1.1 Packing Checklist .................................................................................. 1 1.2 Views of HA91 ........................................................................................ 2 1.3 Remote Control Functions ................................................................... 9 1.4 Keyboard Functions .............................................................................. 11 1.5 Remote Control and Ke
ページ6に含まれる内容の要旨
1 1.1 Packing Checklist Carefully unpack the HA91 and check that besides this User Manual the following items are included: TV quick connector HA91 Power cord & Adapter For NTSC model only Two AA for RF Remote control Recovery CD keyboard & two AA for remote controller (MCE) RF keyboard Cable Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. CHAPTER ONE
ページ7に含まれる内容の要旨
CHAPTER ONE 2 1.2 Features at a Glance ►Front View 1 2 3 4 5 6 7 8 9 1 0 1 1 Item Description 1. Power Push the Power Button to turn the HA91 on. 2. IEEE 1394 (4-pin) Connect IEEE1394-enabled devices. 3. USB 2.0 Connect USB-enabled devices. 4. S-Video In Connector for S-Video in. 5. Composite Video In Connector for Video in. 6. Composite Audio In (L) Connector for Audio in (Left Channel). 7. Composite Audio In (R) Connector for Audio in (Right Channel). 8. VFD VFD (Vacuum Fluorescent Display)
ページ8に含まれる内容の要旨
3 ►Rear View 1 3 1 2 1 2 3 4 5 6 7 8 9 1 0 1 1 Item Description 1. Power Connect the power cord DC Jack here. 2. MIC-In Connect a microphone here. 3. LINE-Out Connect to speakers or an amplifier. 4. LINE-In Stereo audio input port. 5. SPDIF Digital audio output connector. 6. RGB Out Connected to flat screen. 7. USB (x2) Connect USB-enabled devices here. 8. IEEE1394 (6-pin) Connect IEEE1394-enabled devices here. 9. LAN Connect to an RJ-45 connector (Ethernet cable). 10. DVI Port Connect to digita
ページ9に含まれる内容の要旨
CHAPTER ONE 4 ►VFD (Vacuum Fluorescent Display) Messages The LED display on the front of the HA91 displays status information. As well as disc information, the following messages display in the LED display: 1 2 3 4 Not used. Item Description 1 Displays the volume level. 2 Displays the volume level. 3 Displays the current mode. 4 Display time information, media play time, and mode status.
ページ10に含まれる内容の要旨
5 ►Normal Windows Mode (Media Center Applications are not run) / Sleep Mode Status: 1. The system is turn on in normal Windows mode. Media Center applications are not run. 2. System is sleeping. Description: 1. Time is shown. The clock control by VFD MCU. 2. Volumes of audio in left and right are shown. 3. Run Disk is stop. ►Start to run Media Center Applications / On Meida Center Home Frame Status: 1. Press “Start” button to run Media Center applications and the system is in Media Center
ページ11に含まれる内容の要旨
CHAPTER ONE 6 ►My Video Mode Status: When “My Videos” is selected, the screen is on video frame and stop mode. Description: 1. “VIDEO” is shown 2. Run Disk is stop till the media is played. ►My Picture Mode Status: On “My Pictures” frame and stop mode. Description: 1. “PICTURE” is shown. 2. Run Disk is stop. * Run Disk can be rotating when the previous selected media is keep playing.
ページ12に含まれる内容の要旨
7 ►My Music Mode Status: On “My Music” frame and stop mode. Description: 1. “MUSIC” is shown. 2. Run Disk is stop till the media is played. ►TV Mode Status: On “My TV” frame and stop mode. Description: 1. “TV” is shown. 2. Run Disk is stop till the media is played. Status: On TV frame and go to live TV. Description: 1. It will show the channel number once press the button of “CH_PG”. 2. Run Disk is running. CHAPTER ONE
ページ13に含まれる内容の要旨
CHAPTER ONE 8 Status: On TV frame and go to record TV. Description: 1. “REC SHOW” is shown. ►Music / DVD / Video / Play Mode Status: On music, DVD, video frame and play mode Description: 1. When playing the music, it will show the track time on Music frame or Home frame. 2. Run Disk is running. 3. If you go to “My Pictures” on picture frame, then “PICTURE” is shown on the display. ►CD Burning Progress Status: CD burning progress…. Description: 1. When the dot-block is full, means the CD bu
ページ14に含まれる内容の要旨
E S U A P P O 9 1.3 Remote Control Functions REW FWD REPLAY SKIP BACK MORE Item Function Power on/off START Stop CH VOL PG Recording Button MUTE Play RECORDED DVD TV MENU GUIDE LIVE TV Pause Fast Rewind Fast Forward Previous Track Next Track Back CLEAR ENTER More Information Direction Keys: Up/ Down Enter Key: OK Direction Keys: Left/ Right Next Channel (TV) Previous Channel (TV) “START” Menu Mute VOL Volume Up VOL Volume Down D T R S O C E R CHAPTER ONE
ページ15に含まれる内容の要旨
CHAPTER ONE 10 ►Inserting the Remote Control Batteries The battery compartment is on the underside of the remote control. Remove the batteries when not using the HA91 for a longer period. 1. Pull the latch upward and open the battery compartment cover. 2. Insert 2 AA batteries taking note of the correct polarity (+/-). 3. Close the cover. 1. Only use AA batteries. 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the HA91 for pr
ページ16に含まれる内容の要旨
11 1.4 Keyboard Function Left Button Right Button Shortcut Buttons Trackball ►Using the trackball and buttons The trackball and buttons have the same functions as a PC mouse. Roll the trackball to move the cursor on the screen, use the left and right buttons as you do a standard mouse. ►Shortcut Buttons In addition to the normal keys found on standard keyboards, the HA91 keyboard features a number of shortcut buttons, whose functions are outlined below. Button Function Power Power button. MCE
ページ17に含まれる内容の要旨
CHAPTER ONE 12 ►Inserting the Keyboard Batteries The battery compartment is on the underside of the keyboard. Remove the batteries when not using the HA91 for a longer period. 1. Lift as shown to remove the cover. 2. Insert two AA batteries taking note of the correct polarity (+/-). 3. Replace the cover. 1. Only use AA batteries. 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the batteries when not using the HA91 for prolonged periods.
ページ18に含まれる内容の要旨
13 ►Set Up for Linkage 1. Remove the cover and check if the batteries have been installed. (You can follow instructions on P.12 Inserting the Keyboard Batteries). 2. Press connect button on the front panel. After pressing the button, its indicator will light (slowly) and waiting for the match signal from RF Keyboard. Press this button LED is bricking slowly 3. Then press this learning button on RF Keyboard to let receiver recognize signal. As soon as the linkage is completed, the indicator t
ページ19に含まれる内容の要旨
CHAPTER TWO 14 2.1 Connecting Input Devices Many of the connectors on the HA91 support the connection of more than one kind of device. For example, USB printers, keyboards, or scanners can be connected to any of the USB ports. USB Memory Cards 1394 Compliant device Compliant device MIC-In Monitor 1394 LCD TV SPDIF Compliant device Audio-Out LAN TV USB Compliant device
ページ20に含まれる内容の要旨
15 2.2 Connecting a Monitor/ Flat Display Check the connectors on your monitor; many monitors have both a VGA (analog) connector and a DVD-I (digital) connector. If the monitor has both connectors, use the DVI-I connection as digital provides a better quality signal. The following directions refer to connecting a VGA: 1. Connect the cable to the VGA connector on the HA91. Tighten the securing screws. 2. Connect the other end of the cable to corresponding connector on the monitor and tighten
