ページ1に含まれる内容の要旨
Analog LCD Monitor
AL1702 User’s Manual
ページ2に含まれる内容の要旨
TABLE OF CONTENTS FCC compliance statement ........................................................................1 DOC compliance notice .............................................................................1 Introduction ................................................................................................2 Features .....................................................................................................2 Unpacking .................................................
ページ3に含まれる内容の要旨
AL1702 E-1 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide resonable protection against radio frequency interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause interference to radio communications. However, ther
ページ4に含まれる内容の要旨
E-2 User’s Guide INTRODUCTION Congratulations for purchasing model AL1702, a high performance 17-inch color TFT LCD monitor. The AL1702 monitor provides flicker-free and color images at optional resolutions. Through this user guide, we will introduce you step-by-step all the features, functions and technical specifications of the LCD monitor. Surely you will have a refreshing experience working with the monitor. FEATURES The AL1702 is a 17-inch TFT LCD monitor that is intelligent, microproces
ページ5に含まれる内容の要旨
AL1702 E-3 UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. • LCD Monitor Speakers • AC Power Cord • Audio Cable • User Manual
ページ6に含まれる内容の要旨
E-4 User’s Guide Attaching / Removing the Base Install: Remove: Align the four hooks on the bottom of Depress the hook as indicated first the monitor with the corresponding before removing the base and follow the slots on the bottom of the base. arrow direction to remove it. SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can b
ページ7に含まれる内容の要旨
AL1702 E-5 CONNECTING THE POWER CORD • Check first to make sure that the power cord you use is the correct type required for your area. • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet. • For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V. • For unit using at 220
ページ8に含まれる内容の要旨
E-6 User’s Guide PRESET MODES To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the Auto Setup under Windows “Full Screen” pattern. If the mode in use does not match one of the defaults, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 9 user modes. The only condition to store as a user m
ページ9に含まれる内容の要旨
AL1702 E-7 POWER SAVING The monitor will be driven into “Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. Power State LED Light Consumption ON Normal Green Active < 3 W Amber OFF The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds. DDC To make your installation easier, the monitor is able
ページ10に含まれる内容の要旨
E-8 User’s Guide INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the video cable to the computer. 2. Connect power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3. Connect the Audio Cable. 4. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important.
ページ11に含まれる内容の要旨
AL1702 E-9 USER CONTROLS 3 1 2 45 6 Front Panel Controls 1. Power Switch: To turn ON or OFF the power. 2. Power LED: Lights up to indicate the power is turned ON. 3. Auto Adjust button / Exit: 1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2)When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus. 4.
ページ12に含まれる内容の要旨
E-10 User’s Guide HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-4. ADJUSTING THE PICTURE The descriptions for function control LEDS Main Sub Sub Menu Menu Menu Description I
ページ13に含まれる内容の要旨
AL1702 E-11 Main Sub Menu Menu Sub Menu Item Description Icon Icon H. Position Adjust the horizontal position. V. Position Adjust the vertical position. N/A Warm Set the color temperature to warm white. N/A Cool Set the color temperature to cool white. User /Red User/Green Adjusts Red/Green/Blue intensity. User/Blue N/A English N/A N/A Deutsch N/A Francais Multi-language selection. N/A Espanol N/A Italiano N/A N/A
ページ14に含まれる内容の要旨
E-12 User’s Guide Main Sub Menu Menu Sub Menu Item Description Icon Icon H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. OSD Timeout Adjust the OSD timeout. Auto Adjust the H/V Position, Focus and N/A Auto Config Clock of picture. Show the resolution, H/V frequency and N/A Information input port of current iput timing. Clear each old status of Auto- N/A Reset configuraation and set the color temperature to Cool. N/A Exit Save user ad
ページ15に含まれる内容の要旨
AL1702 E-13 TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. Problems Current Status Remedy LED ON Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF Check the power switch. No Check if AC power cord is properly connected Picture to the monitor. LED displays Check if video signal cable is properly amber color connected at the back of mon
ページ16に含まれる内容の要旨
E-14 User’s Guide SPECIFICATION Driving system TFT Color LCD Size 43.2cm(17.0") Pixel pitch 0.264mm( H )x 0.264mm( V ) LCD Panel Brightness 250cd/m2 (Typical) Contrast 400:1(Typical) 0 0 Viewable angle 140 (H) 125 (V) Response time 25 ms Video R,G,B Analog Interface H-Frequency 30KHz - 81KHz V-Frequency 55-75Hz Display Colors 16.2M Colors Dot Clock 135MHz Max. Resolution 1280 x 1024 @75Hz Plug & Play VESA DDC/DDC2B ON Mode<45W EPA ENERGY STAR OFF Mode< 3W Input Connector D-Sub 15pin Analog
ページ17に含まれる内容の要旨
AL1702 E-15 0 0 Operating Temp: 5 to 35 C 0 0 Environmental Considerations Storage Temp.: -20 to 60 C Operating Humidity: 10% to 85% Dimensions 374(W) x 373(H) x 200(D)mm Weight (N. W.) 4.6kg Unit (net) Auto Adjust Key >/ Volume Switch
