ページ1に含まれる内容の要旨
User Manual
FPM-8192V/8232V
19”/23” Marine Grade Monitors
ページ2に含まれる内容の要旨
Copyright The documentation and the software included with this product are copyrighted 2008 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and
ページ3に含まれる内容の要旨
Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the prod
ページ4に含まれる内容の要旨
Technical Support and Assistance 1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: – Product name and serial number – Description of your peripheral attachments – Description of your software (operating system, versio
ページ5に含まれる内容の要旨
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equip- ment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or letting i
ページ6に含まれる内容の要旨
FPM-8192V/8232V User Manual vi
ページ7に含まれる内容の要旨
Chapter 1 General Information ............................1 1.1 Introduction ............................................................................................... 2 1.1.1 Features ....................................................................................... 2 1.1.2 Basic Construction of Marine Bridge System Display .................. 3 Figure 1.1 Basic Construction...................................................... 3 1.2 Touchscreen Solution (Optional)...................
ページ8に含まれる内容の要旨
B.2 Troubleshooting ...................................................................................... 30 Appendix C Supported Modes.............................. 31 C.1 Graphics.................................................................................................. 32 C.2 Video....................................................................................................... 32 Appendix D RS-232 Command Code (Optional).33 D.1 RS-232 Command Code................................
ページ9に含まれる内容の要旨
Chapter 1 1General Information
ページ10に含まれる内容の要旨
1.1 Introduction The Marine Bridge System Displays are an extraordinary display design with sunlight readable high quality panel, dimming brightness, ease of use OSD front panel con- trol, IP65 proof, multi-scan video function, high quality touchscreen, wide voltage range power input acceptable, and anti-corrosion protection. Born to the demands of maritime applications such as navigation, ship automation and surveillance. All product designs follow IEC-60945 Maritime Navigation and Radio-commu
ページ11に含まれる内容の要旨
Chapter 1 General Information IP65 OSD Front Panel Design With IP65 water-dust front bezel proof, the Marine Bridge System Displays use easy to use front panel OSD control. It’s very convenience and intelligent design for all maritime users. Anti-Shock and Vibration Base on our well-experience modulized competence, we can do very flexible and tai- lor-made design fulfilling any of customer’s solution. For different panel characteris- tics, mechanical design, and electronic component, we can make
ページ12に含まれる内容の要旨
1.2 Touchscreen Solution (Optional) 1.2.1 Five-Wire Resistive Touchscreen (Optional 1) Introduction to Five-Wire Resistive Touchscreen The five-wire resistive touchscreens use a glass panel with a uniform resistive coat- ing. A thick polyester coversheet is tightly suspended over the top of the glass, sepa- rated by small, transparent insulating dots. The coversheet has a hard, durable coating on the outer side and a conductive coating on the inner side. When the screen is touched, the conductiv
ページ13に含まれる内容の要旨
Chapter 1 General Information 1.2.2 SecureTouch Surface Wave Touchscreen (Optional 2) Introduction to SAW Touchscreen The surface wave is the optical standard of touch. Its pure glass construction pro- vides superior optical performance and makes it the most scratch-resistant technol- ogy available. It's nearly impossible to physically "wear out" this touchscreen. The touch have a glass overlay with transmitting and receiving piezoelectric trans- ducers for both the X and Y axes. The touchscree
ページ14に含まれる内容の要旨
FPM-8192V/8232V User Manual 6
ページ15に含まれる内容の要旨
Chapter 2 2Installation
ページ16に含まれる内容の要旨
2.1 General Installation The Marine Bridge System Display can be applied for several different installation methods. Including panel (flush) mounting, bracket mounting, ceiling / wall mount- ing…etc. For panel (flush) mounting is normally for a ship’s wheelhouse use, it’s easy to follow few steps to fix the display product in customer’s fixture. Check the mechanical and mounting concept as below first. The fixture cut-out dimension and mounting holes based on drawing. 1. Put the marine product
ページ17に含まれる内容の要旨
Chapter 2 Installation 2. Use M4x 15mm bolts to drill through the fixture into the mounting holes on the rear side of IP65 front bezel.(The quantity of mounting screws based on draw- ing) 3. Check the finished mounting concept. 9 FPM-8192V/8232V User Manual
ページ18に含まれる内容の要旨
Note! VESA and wall mount with mounting kit by special request. FPM-8192V/8232V User Manual 10
ページ19に含まれる内容の要旨
Chapter 2 Installation 2.2 Installation Notice 2.2.1 Brightness Control Knob Precaution The dimming brightness control knob may be damaged by wrong placement. Please make sure the right way to protect the knob. 2.2.2 Cable Connection Precaution Make sure to use qualified shielded signal cable to connect to Marine products. These cables including RGB, DVI, RS232, LAN, and USB cable should be connected inside the area as marked below. For DC power connection, please make sure the power cable is ti
ページ20に含まれる内容の要旨
FPM-8192V/8232V User Manual 12
